Transport Canada recall 2023603
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | Transport Canada (Canada) |
|---|---|
| Campaign number | 2023603 |
| Manufacturer's number | HP67 / AM28 |
| Reported | 2023-11-08 |
| Component | Engine |
| Notification type | Safety Mfr |
| Units potentially affected | 29601 |
What is wrong
Issue:
On certain vehicles equipped with a V6 engine, the connecting rod bearings could wear prematurely and become damaged. If this happens, the engine could make abnormal noises and a warning light may turn on. If you continue to drive the vehicle with these symptoms, the engine could fail.
Safety Risk:
An engine failure could cause a sudden loss of power and/or increase the risk of a vehicle fire. Both issues could increase the risk of a crash or injury.
Corrective actions:
Honda will notify owners by mail and advise you to take your vehicle to a dealership to inspect the engine. If damage is found, the dealer will replace the necessary parts.
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| BEBM12032025901 | 2025-12-17. Other. Dealer Message - Under certain circumstances, after coming to a stop and the idle stop feature engages, the vehicle may not automatically restart. Typically, the client can immediately restart the vehicle by selecting Park and pushing the ENGINE START/STOP button. |
|---|---|
| BPS&08122025901 | 2025-08-21. Other. Dealer Message - Acura is also implementing an additional (1) twenty-four (24) month period for 2015 model year Acura TLX vehicles, commencing at the expiration of the 10-year warranty extension period for each vehicle, and (2) eighteen (18) month period for 2016 model year Acura TLX/MDX vehicles, commencing at the expiration of the 10-year warranty extension period for each vehicle, for valve adjustment and starter replacement related to this condition under warranty. |
| B23-002 | 2025-07-09. Service bulletin. Service Bulletin - Under certain circumstances, after coming to a stop and engaging idle stop the vehicle may not restart automatically due to excessive cylinder pressure and/or low cranking torque. Typically, the client can immediately restart the vehicle by selecting Park and pressing the ENGINE START/STOP button. |
| B22-009 | 2025-07-09. Service bulletin. Service Bulletin - Under certain circumstances, after coming to a stop and engaging idle stop the vehicle may not restart automatically due to excessive cylinder pressure and/or low cranking torque. Typically, the client can immediately restart the vehicle by selecting Park and pressing the ENGINE START/STOP button. |
| A23-009 | 2025-07-09. Service bulletin. Service Bulletin - Under certain circumstances, after coming to a stop and engaging idle stop, the vehicle may not restart automatically due to excessive cylinder pressure and/or low cranking torque. Typically, the customer can immediately restart the vehicle by selecting Park and pressing the ENGINE START/STOP button. |
| A23-078 | 2025-06-05. Service bulletin. Service Bulletin - Torque converters may not have been manufactured to proper specifications. As a result, the torque converter lock-up clutch cannot provide adequate holding force due to pressure bleeding down through a crack in the lock-up piston. The reduced lock-up clutch capacity results in the transmission indicator flashing “D” and set DTC P0741 Torque Converter Clutch Performance or Stuck OFF. |
| A23-078 | 2025-06-05. Service bulletin. Service Bulletin - Torque converters may not have been manufactured to proper specifications. As a result, the torque converter lock-up clutch cannot provide adequate holding force due to pressure bleeding down through a crack in the lock-up piston. The reduced lock-up clutch capacity results in the transmission indicator flashing “D” and set DTC P0741 Torque Converter Clutch Performance or Stuck OFF. |
| A23-078 | 2025-04-29. Service bulletin. Service Bulletin - Torque converters may not have been manufactured to proper specifications. As a result, the lock-up clutch cannot provide adequate holding force due to pressure bleeding down through a crack in the lock-up piston. The reduced lock-up clutch capacity results in the transmission indicator flashing “D” and set the DTC P0741 Torque Converter Clutch Performance or Stuck OFF. |
| AEBM04182025901 | 2025-04-29. Other. Dealer Message - Torque converters may not have been manufactured to proper specifications. As a result, the torque converter lock-up clutch cannot provide adequate holding force due to pressure bleeding down through a crack in the lock-up piston. The reduced lock-up clutch capacity results in the MIL not illuminating. “D” flashes and “Transmission Overheat” message appears setting DTC P0741 Torque Converter Clutch Circuit Performance or Stuck OFF. |
| B24-022 | 2025-03-05. Service bulletin. Service Bulletin - The AWD warning light is on with one or more AWD DTCs having been set due to water intrusion into the electric oil pump motor connector area corrodes the terminals. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.