Service bulletin T-SB-0042-23
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10241387 |
| Published by NHTSA | 2023-08-28 |
| Manufacturer's number | T-SB-0042-23 |
| Manufacturer's date | 2023-07-03 |
| NHTSA component | WHEELS |
NHTSA's summary
TSB: Some 2023 ? 2024 model year Toyota vehicles use hub bolts in place of studs/nuts to fasten the wheels to the vehicle. If non-compatible wheels or hub bolts/nuts are installed, there is increased risk that the wheel(s) could come off resulting in a crash. This service bulletin outlines the physical differences and precautions that should be taken when servicing different wheel and wheel fastener types.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Wheels
| TOYOTA 4RUNNER | 2023, 2024 |
|---|---|
| TOYOTA BZ4X | 2023, 2024 |
| TOYOTA CAMRY | 2023, 2024 |
| TOYOTA CAMRY HYBRID | 2023, 2024 (the catalog's model; the bulletin names a series or trim of it) |
| TOYOTA COROLLA | 2023 |
| TOYOTA COROLLA CROSS | 2023, 2024 |
| TOYOTA COROLLA CROSS HYBRID | 2023, 2024 (the catalog's model; the bulletin names a series or trim of it) |
| TOYOTA COROLLA HATCHBACK | 2023, 2024 (the catalog's model; the bulletin names a series or trim of it) |
| TOYOTA COROLLA HYBRID | 2023, 2024 (the catalog's model; the bulletin names a series or trim of it) |
| TOYOTA CROWN | 2023, 2024 |
| TOYOTA GR COROLLA | 2023, 2024 |
| TOYOTA GRAND HIGHLANDER | 2024 |
| TOYOTA GRAND HIGHLANDER HYBRID | 2024 (the catalog's model; the bulletin names a series or trim of it) |
| TOYOTA HIGHLANDER | 2023 |
| TOYOTA HIGHLANDER HYBRID | 2023, 2024 (the catalog's model; the bulletin names a series or trim of it) |
| TOYOTA MIRAI | 2023, 2024 |
| TOYOTA PRIUS | 2023, 2024 |
| TOYOTA PRIUS PRIME | 2023, 2024 (the catalog's model; the bulletin names a series or trim of it) |
| TOYOTA RAV4 | 2023 |
| TOYOTA RAV4 HYBRID | 2023, 2024 (the catalog's model; the bulletin names a series or trim of it) |
| TOYOTA RAV4 PRIME | 2023, 2024 (the catalog's model; the bulletin names a series or trim of it) |
| TOYOTA SEQUOIA HYBRID | 2023, 2024 (the catalog's model; the bulletin names a series or trim of it) |
| TOYOTA SIENNA HYBRID | 2023, 2024 (the catalog's model; the bulletin names a series or trim of it) |
| TOYOTA SUPRA | 2023, 2024 |
| TOYOTA TACOMA | 2023 |
| TOYOTA TUNDRA | 2023, 2024 |
| TOYOTA TUNDRA HYBRID | 2023, 2024 (the catalog's model; the bulletin names a series or trim of it) |
| TOYOTA VENZA HYBRID | 2023, 2024 (the catalog's model; the bulletin names a series or trim of it) |
| TOYOTA redundant 86 | 2023 to 2024 |
| TOYOTA redundant SEQUOIA | 2023 |
| TOYOTA redundant SIENNA | 2023 to 2024 |
| TOYOTA redundant VENZA | 2023 to 2024 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 24V911000 | 2024-12-05. SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:CALIPER; WHEELS:HUB |
|---|---|
| 23V432000 | 2023-06-15. WHEELS:LUGS/NUTS/BOLTS/STUDS |
| 2022739 | 2022-12-21. Wheels |
| 22V444000 | 2022-06-23. WHEELS:HUB |
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| 24TD01_Dealer Pa | 2024-04-15. Service bulletin. DP: In the subject vehicles, the original factory toe angle setting for the front wheels may cause excessive and premature wear of the outside shoulders of the tires. |
|---|---|
| 24TD01_Dealer Pa | 2024-04-15. Service bulletin. DP: In the subject vehicles, the original factory toe angle setting for the front wheels may cause excessive and premature wear of the outside shoulders of the tires. |
| TSB007019 | 2023-12-26. Service bulletin. TSB: Some 2015 ? 2023 model year TRD Pro Edition 4Runner vehicles may exhibit an abnormal noise when in Reverse with the wheels at or near full lock due to interference between the tire and bumper and/or fender liner. Follow the Repair Procedure in this bulletin to address this condition. |
| T-SB-0070-19 Rev | 2023-11-27. Service bulletin. TSB: Some 2015 ? 2023 model year TRD Pro Edition 4Runner vehicles may exhibit an abnormal noise when in Reverse with the wheels at or near full lock due to interference between the tire and bumper and/or fender liner. Follow the Repair Procedure in this bulletin to address this condition. |
| TSB002723 | 2023-10-16. Service bulletin. TSB: During the manufacturing process, tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation. |
| T-SB-0027-23 | 2023-06-26. Service bulletin. TSB: During the manufacturing process, tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation. Refer to the Tire Positioning Procedure in this bulletin to ensure that the original tires stay in the same location on the vehicle |
| T-SB-0105-22 | 2022-12-19. Service bulletin. TSB: During the manufacturing process, tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation. Refer to the Tire Positioning Procedure in this bulletin to ensure that the original tires stay in the same location on the vehicle. |
| T-SB-0031-22 Rev | 2022-09-15. Service bulletin. TSB: During the manufacturing process, tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation. Refer to the Tire Positioning Procedure in this bulletin to ensure that the original tires stay in the same location on the vehicle |
| T-SB-0031-22 Rev | 2022-08-15. Service bulletin. TSB: During the manufacturing process, tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation. Refer to the Tire Positioning Procedure in this bulletin to ensure that the original tires stay in the same location on the vehicle. |