Transport Canada recall 2022739
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | Transport Canada (Canada) |
|---|---|
| Campaign number | 2022739 |
| Manufacturer's number | SRC RE6 |
| Reported | 2022-12-21 |
| Component | Wheels |
| Notification type | Safety Mfr |
| Units potentially affected | 38 |
What is wrong
Issue:
On certain vehicles, the wrong wheel lock bolts may have been installed. As a result, the wheels and the threads on the axle hubs may have been damaged. This could cause a wheel lock bolt to loosen and fall off. If this happens, a wheel could separate from the vehicle.
Safety Risk:
A wheel separation could cause a loss of control and increase the risk of a crash. A wheel that separates could also hit another person or vehicle.
Corrective Actions:
Toyota will notify owners by mail and instruct you to take your vehicle to a dealership to replace the wheel lock bolts, the axle hubs and the wheels.
| 2023 TOYOTA SUPRA |
|---|
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| T-SB-0042-23 | 2023-08-28. Service bulletin. TSB: Some 2023 ? 2024 model year Toyota vehicles use hub bolts in place of studs/nuts to fasten the wheels to the vehicle. If non-compatible wheels or hub bolts/nuts are installed, there is increased risk that the wheel(s) could come off resulting in a crash. This service bulletin outlines the physical differences and precautions that should be taken when servicing different wheel and wheel fastener types. |
|---|---|
| T-SB-0105-22 | 2022-12-19. Service bulletin. TSB: During the manufacturing process, tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation. Refer to the Tire Positioning Procedure in this bulletin to ensure that the original tires stay in the same location on the vehicle. |
| T-SB-0031-22 Rev | 2022-09-15. Service bulletin. TSB: During the manufacturing process, tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation. Refer to the Tire Positioning Procedure in this bulletin to ensure that the original tires stay in the same location on the vehicle |
| T-SB-0031-22 Rev | 2022-08-15. Service bulletin. TSB: During the manufacturing process, tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation. Refer to the Tire Positioning Procedure in this bulletin to ensure that the original tires stay in the same location on the vehicle. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.