WenmarOpen by Wenmar Pro

Service bulletins for the 2024 Toyota PRIUS

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

108 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Bulletins, newest first
26TC012026-10-08. Service bulletin. ELECTRICAL SYSTEM. TECHNICAL INSTRUCTIONS FOR SPECIAL SERVICE CAMPAIGN 26TC01 POWER DISTRIBUTION BOX CERTAIN 2024 – 2025 MODEL YEAR PRIUS 2024 MODEL YEAR PRIUS PHV
26TC012026-10-08. Service campaign. ELECTRICAL SYSTEM. An electrical connection for the rear window defogger may not have been installed correctly during vehicle assembly. Overtime, this can cause the rear window defogger to become inoperable, which could reduce visibility through the rear window when moisture or condensation is present
T-SB-0104-21 Rev22026-03-07. Service bulletin. ENGINE. OBSOLETE NOTICE February 27, 2026: This bulletin is no longer applicable and is now obsolete.
T-SB-0055-24 Rev22026-02-11. Service bulletin. UNKNOWN OR OTHER. Some 2005 – 2026 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
T-TT-0784-25 Rev12025-07-10. Service bulletin. ENGINE. Some ECUs can set a DTC that is common with other ECUs. This can lead to accidental use of the wrong repair manual when diagnosing these type of DTCs.
T-TT-0784-252025-07-10. Service bulletin. ENGINE. Some ECUs can set a DTC that is common with other ECUs. This can lead to accidental use of the wrong repair manual when diagnosing these type of DTCs.
T-SB-0058-23 Rev12025-07-10. Service campaign. ELECTRICAL SYSTEM. The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. The procedures outlined in this Service Bulletin aid in locating, inspecting, and repairing refrigerant leaks.
T-TT-0779-252025-06-06. Service bulletin. ELECTRICAL SYSTEM. To assist with the early detection and early resolution of audio related concerns you may be asked to recover MMR data from the head unit. The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by FTS and/or FPE.
T-TT-0779-252025-05-15. Service bulletin. ELECTRICAL SYSTEM. To assist with the early detection and early resolution of audio related concerns you may be asked to recover MMR data from the head unit. The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by FTS and/or FPE.
T-SB-0021-252025-04-08. Service bulletin. ENGINE. Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Global Techstream+ (GTS+) ECU flash reprogramming procedures and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard+ (CUW+). To ensure the correct ECU software is installed, ECUs will require a Security Signature before the ECU will initialize the flash reprogramming sequence. This bulletin also details the process for acquiring a Security Signature from TIS during the GTS+ ECU flash reprogramming process.
T-SB-0013-24 Rev12025-04-08. Service bulletin. ELECTRICAL SYSTEM. The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased and can never be reused. Another feature, Add/Remove Key, is also available. Once a key is removed, it can never be reused.
T-SB-0107-20 Rev22025-03-25. Service bulletin. ENGINE. OBSOLETE NOTICE February 11, 2025: This bulletin is now obsolete. Please see T-SB-0021-25.
T-SB-0021-252025-03-11. Service bulletin. ENGINE. Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Global Techstream+ (GTS+) ECU flash reprogramming procedures and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard+ (CUW+). To ensure the correct ECU software is installed, ECUs will require a Security Signature before the ECU will initialize the flash reprogramming sequence. This bulletin also details the process for acquiring a Security Signature from TIS during the GTS+ ECU flash reprogramming process.
T-SB-0013-24 Rev12025-03-11. Service bulletin. ELECTRICAL SYSTEM. The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased and can never be reused. Another feature, Add/Remove Key, is also available. Once a key is removed, it can never be reused.
24TC082025-02-12. Service bulletin. ENGINE. TECHNICAL INSTRUCTIONS FOR SPECIAL SERVICE CAMPAIGN 24TC08 TI ver. 2 FUEL TANK FILLER CLAMP AND VAPOR LEAK DETECTION CERTAIN 2023 MODEL YEAR PRIUS PRIME
24TC082025-02-12. Service bulletin. ENGINE. TECHNICAL INSTRUCTIONS FOR SPECIAL SERVICE CAMPAIGN 24TC08 TI ver. 1 FUEL TANK FILLER CLAMP AND VAPOR LEAK DETECTION CERTAIN 2023-2024 MODEL YEAR Corolla HV CERTAIN 2023 MODEL YEAR PRIUS
24TC082025-02-12. Service campaign. ENGINE. In the subject vehicles, the vapor leak detection monitor system may not detect a vapor leak from the fuel filler cap and illuminate the malfunction indicator lamp (MIL).
24TC082025-02-12. Service campaign. ENGINE. In the subject vehicles, the vapor leak detection monitor system may not detect a vapor leak from the fuel filler cap and illuminate the malfunction indicator lamp (MIL).
T-SB-0120-20 Rev22025-02-12. Service bulletin. ELECTRICAL SYSTEM. OBSOLETE NOTICE January 30, 2025: This bulletin is now obsolete. Please see T-SB-0015-25.
T-SB-0015-252025-02-12. Service bulletin. ELECTRICAL SYSTEM. Some 2021 – 2025 model year Toyota vehicles may require the download and installation of vehicle specific software or configuration software when the Electronic Control Unit (ECU) is replaced. GTS+ software has been modified to indicate when configuration software is required. A new Configure column has been added to the GTS+ Health Check Results screen to show when configuration software is available for a specific ECU.
T-SB-0111-20 Rev22025-02-12. Service bulletin. ELECTRICAL SYSTEM. OBSOLETE NOTICE January 23, 2025: This bulletin is now obsolete. Please see T-SB-0011-25.
T-SB-0011-252025-02-12. Service bulletin. ELECTRICAL SYSTEM. When certain vehicle ECUs are replaced, the ECU Security Key must be written in order for that ECU to communicate on the vehicle network. The GTS+ Software Health Check Results screen has been enhanced to help identify if a replacement ECU requires an ECU Security Key.
T-SB-0039-24 Rev22025-01-09. Service bulletin. STRUCTURE:BODY. The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
T-SB-0038-24 Rev22025-01-09. Service bulletin. STRUCTURE:BODY. To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
T-SB-0035-24 Rev22025-01-09. Service bulletin. STRUCTURE:BODY. Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.