Service bulletin CHRYSLER
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10219759 |
| Published by NHTSA | 2022-09-15 |
| Manufacturer's number | CHRYSLER |
| Manufacturer's date | 2015-03-06 |
| NHTSA component | BACK OVER PREVENTION; VISIBILITY; EXTERIOR LIGHTING; LANE DEPARTURE |
NHTSA's summary
The customer may experience the blind spot monitor indicator in either outside mirror maybe flashing or on continuously.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Driver assistance, Glass, wipers and mirrors, Lighting, Backup camera
| CHRYSLER 300 | 2013 |
|---|---|
| CHRYSLER TOWN AND COUNTRY | 2013, 2014 |
| DODGE CARAVAN | 2013 to 2014 |
| DODGE CHARGER | 2013 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| S1408000384 | 2024-01-02. Service bulletin. Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On |
|---|---|
| 9003357 | 2024-01-02. Service bulletin. ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY (with mileage above 30,000) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA. |
| 55111275A | 2022-09-26. Service bulletin. Sun Sensor Multi zone Auto Climate Control systems. Left and right outlet temperatures do not match when system is in "sync" . Occupants will experience being cold ( winter time), on either passenger or driver side, even though the temperature setting is the same. Root cause: Suspect sun senors ( PN 55111274AA and 55111275AA). THERE WILL BE NO DTC FOR THE SUN SENSOR active or stored. The issue is diagnosed by using an INCANDESCENT (not LED) shop lamp. Shine the shop lamp on the left side of the sensor, then on the right side of the sensor, while monitoring sensor output with STARSCAN. The reading should change from 0 (or near zero) to about 20 to 40. The important thing is that the left and right readings are the same, and that they change when the lamp is shone on it. |
| 02-007-14 | 2022-08-22. Service bulletin. Front End Clunk Noise When Coming To A Stop - Police Vehicles Only This bulletin involves replacing the left side or the right side or both side tension struts. Police vehicles with heavy duty suspension and rear wheel drive may experience a front end clunk noise, coming from the tension strut bushing(s), while coming to a stop. |
| 08-016-13 | 2022-07-25. Service bulletin. Flash: Indicator For The Blind Spot Monitor Is Flashing Or On Continuously This bulletin involves updating the Left and Right Blind Spot Sensor (LBSS/RBSS) software. Not find any DTC's. |
| 05-003-13 | 2022-07-25. Service bulletin. Front And/Or Rear Brake Noise (Squeal) This bulletin involves changing front and rear brake pads to correct a brake squeal noise. The customer may experience a squealing noise during braking coming from the front and/or rear of the vehicle. |
| CHRYSLER | 2022-04-04. Service bulletin. The customer may experience the blind spot monitor indicator in either outside mirror maybe flashing or on continuously. |
| 08-030-14 REV. A | 2018-06-11. Service bulletin. Flash: RE2 RE3 RE4 RE6 RE7 RB4 RB5 RB6 RB4 Radio Enhancements This bulletin involves updating the radio?s software and Navigation if required. A customer may experience, one or more of the following conditions: Radio display screen shows ?Test Mode?. Navigation screen locks up or display will be blank. Navigation feature lockout disable (International Only). Navigation system resets intermittently. Translation improvements/corrections. System consistency and operational improvements for menu selections, month/date formatting, and Garmin translation functions. Radio system improvements during remote start operation. Unable to adjust radio volume using steering wheel switch intermittently. Second screen is blank when using split screen function. Some functionality for Japanese and Korean - keyboard, search, sort and jump. Unable to add contacts to the favorite list. Unable to dial the phone from the radio, while still able to dial from the phone. Unable to delete a cell phone number from the favorite list. More space available for phone book entries. BlackBerry support for playing songs. Reduce ticking noise during CD/USB pause and VR is silent between prompts. VR unable to transition from Non-navigation to navigation mode. Viod screen is displayed with navigation screen. Asian language translation added. Highlighted preset continues blinking. Takes more then one button press to select preset #10. Unable to adjust volume from steering wheel switches. Clock adjust pop up message displayed in English rather than current language. Can not connect to the phone after it has been disconnect. Teleprompter screen shows incomplete text. Some functionality for traffic & weather jump button. After changing a language and then selecting CDDA ?of? is displayed as a tracking number. In ?Set Date Year? only 3 digits are displayed. Split map view will not cancel. Map screen turns black when driving. When in Italian, the destination arrival text will overlap onto the |
| 9002503 | 2018-06-11. Service bulletin. Part Description: RHR Radio Issue Description: Issue 1: While performing RHR radio reflash (software update), on rare occasions, the flash can fail to properly update the radio resulting in the radio running in Emergency IFS mode. This error condition can occur due to interrupting the software update, background radio operations interfering with the reflash process, etc. The radio will reboot, but with limited functionality (examples may include but are not limited to: NAV, Voice Recognition, Bluetooth, or AUX jack are inop, no available space shown on HDD, etc.). The radio can still be properly updated by simply reinserting the software update disc and performing the reflash procedure again. To assist in the verification that the radio is running Emergency IFS perform the following:~ 1. Power on radio~2. Press MENU H/K~3. Press System Setup S/K~4. Press Manage HDD S/K~5. Press Display Available Space on HDD S/K~6. When running Emergency IFS, all items under Used, Available, and Capacity report as dashes~ Issue 2: If you are having troubles connecting a phone or a MP3 player, try removing the battery on the device and then going through the pairing/connection procedure again. If you cannot remove the battery on the device, perform a reboot. Each manufacturer has a different series of buttons to hold down to perform a reboot. If the problem still persists, try the device on another like vehicle with the same radio. If you are having the same connection issues on another like vehicle, the device may be faulty or it may not be compatible with the RHR radio. Go to www.chrysler.com/hostb/crossbrand/owners/en and click on ?Bluetooth Phone Compatibility Test Results? link for a list of phones that are compatible. For MP3 players and media storage devices, only .wma, .aac, .mp3, .sacd, .jpeg & .jpg files are supported. Remove all other file types and reevaluate the concern. ~ Issue 3: If upgrading a vehicle from a low line radio that has factory installed UConnect |
| 18-086-16 | 2017-11-03. Service bulletin. Flash: Powertrain Diagnostic and System ImprovementsThis bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience the following symptom or conditions or a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following (DTCs):JC Vehicles equipped with a 2.4L engine (Sales Code ED3 or ED7):· **P0335 - Crankshaft Position Sensor Circuit. · P050B - Cold Start Ignition Timing Performance.· P2299 - Brake Pedal Position / Accelerator Pedal Position Incompatible.**· U0140 - Lost Communication With Body Control Module. Attempting to clear the DTC may be unsuccessful.· P0456 - Evap purge system small leak.· 2-1 downshift improvement.· Charging system duty cycle enhancement to improve starting performance in low ambient temperatures.· P219A - Bank 1 Air-Fuel Ratio Imbalance.· Enhanced Automatic Oil Change Indicator (EAOCI) system enhancements that forcethe use of the severe duty cycle algorithm anytime the PCM is replaced. The vehicleduty cycle information used in the EAOCI calculation is stored in the PCM and cannot be recovered/transferred when the controller is replaced. As a result, the severe duty cycle is used in these scenarios to ensure the customer receives a timely oil change required message.· Mode 6 data accuracy enhancement for generic scan tools. JC Vehicles equipped with a 3.6L engine (Sales Code ERB):· **P0335 - Crankshaft Position Sensor Circuit.· P2610 - PCM Internal Engine Off Timer Performance.**· U0140 - Lost Communication With Body Control Module. Attempting to clear theDTC may be unsuccessful.· Enhanced Automatic Oil Change Indicator (EAOCI) system enhancements that forcethe use of the severe duty cycle algorithm anytime the PCM is replaced. The vehicleduty cycle information used in the EAOCI calculation is stored in the PCM and cannot be recovered/transferred when the controll |