Service bulletin 1806715 REV A
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10215167 |
| Published by NHTSA | 2022-07-05 |
| Manufacturer's number | 1806715 REV A |
| Manufacturer's date | 2015-11-19 |
| NHTSA component | POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM) |
NHTSA's summary
Flash: PCM Software Enhancements.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Transmission and driveline, Automatic transmission, Transmission control module
| CHRYSLER 300 | 2011, 2012 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 16V240000 | 2016-04-25. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM) |
|---|
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| S1709000010 | 2023-01-09. Service bulletin. Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear (roller failure) on one or more cam lobes and that camshaft/lifter replacement is necessary. |
|---|---|
| V51 | 2022-12-19. Service bulletin. Customer Satisfaction Notification V51 Reprogram Powertrain Control Module |
| S1121000006RevA | 2022-09-26. Service bulletin. (Revision A) No Start No Crank ? Starter Will Not Engage And There Are No Related Codes Or Concerns |
| 1806715REVA | 2022-08-22. Service bulletin. Flash: PCM Software Enhancements. |
| 18-020-13 | 2022-07-18. Service bulletin. Flash: Erroneous P0573- Brake Switch 1 Stuck Off This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software to eliminate the potential of setting this erroneous Diagnostic Trouble Code. Technician may find that the following erroneous Diagnostic Trouble Code has been set: P0573 - Brake Switch 1 Stuck Off |
| 1808515 | 2022-07-05. Service bulletin. This bulletin involves selectively erasing and reprogramming the Powertrain Control |
| 18-020-13 | 2021-03-15. Service bulletin. Flash: Erroneous P0573- Brake Switch 1 Stuck Off This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software to eliminate the potential of setting this erroneous Diagnostic Trouble Code. Technician may find that the following erroneous Diagnostic Trouble Code has been set: P0573 - Brake Switch 1 Stuck Off |
| S1121000006 Rev. | 2020-09-28. Service bulletin. (Revision A) No Start No Crank ? Starter Will Not Engage And There Are No Related Codes Or Concerns |
| 18-067-15 REV A | 2019-05-20. Service bulletin. Flash: PCM Software Enhancements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) set in the Powertrain Control Module (PCM): ? U0140 - Lost Communication With Body Control Module. ? U0401 - Implausible Data Received From ECM/PCM. ? P0441 - Evap Purge System Performance. ? P0340 - Camshaft Position Sensor Circuit - Bank 1 Sensor 1. This software update also has improvements for fuel pump relay cycling during remote starts. |
| 18-067-15 | 2018-11-19. Service bulletin. Flash: PCM Software Enhancements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find one of the following Diagnostic Trouble Codes (DTCs) have been set: ? U0401-00 - Implausible Data Received From ECM/PCM ? P0441 - Evap Purge System Performance ? P0340 - Camshaft Position Sensor Circuit - Bank 1 Sensor 1 This software update also has improvements for fuel pump relay cycling during remote starts. |