Service bulletin SSM 50896
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10214843 |
| Published by NHTSA | 2022-06-30 |
| Manufacturer's number | SSM 50896 |
| Manufacturer's date | 2022-06-27 |
| NHTSA component | POWER TRAIN; BACK OVER PREVENTION:SOFTWARE |
NHTSA's summary
Some 2022 Escape and Bronco Sport vehicles may exhibit a powertrain malfunction (wrench) indicator with diagnostic trouble code (DTC) P0929:77 stored in the gear shift module (GSM). This may be due to the software in the GSM. To correct this condition, reprogram the GSM module using the latest software level of the Ford Diagnosis and Repair System (FDRS). For claiming, use causal part 7P155 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Driver assistance, Transmission and driveline, Backup camera
Trouble codes named
P0929
| FORD BRONCO SPORT | 2022 |
|---|---|
| FORD ESCAPE | 2022 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 26V123000 | 2026-03-03. BACK OVER PREVENTION:SOFTWARE |
|---|---|
| 25V442000 | 2025-06-27. BACK OVER PREVENTION:SOFTWARE |
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| 25N17 | 2026-03-27. Other. Advance Notice – Customer Satisfaction Program 25N17 Certain 2015-2025 Model Year Multiple Vehicle Lines Rear View Camera Replacement If Required After Dealer Evaluation |
|---|---|
| SSM 51254 | 2023-01-05. Service bulletin. Some 2020-2022 Escape/Corsair/F-53 Motorhome/F-59 Commercial Stripped Chassis, 2021-2023 F-650/F-750/E-Series, and 2021-2022 Bronco Sport vehicles may exhibit an intermittent no crank/no start condition and/or an intermittent blank instrument panel cluster (IPC)/SYNC touchscreen. This may be due to the software in the gateway module (GWM). To correct the condition, reprogram the GWM using the latest software level of the appropriate Ford diagnostic scan tool. For claiming use causal part 14F642 and the applicable labor operations of Section 10 of the Service Labor Time Standards (SLTS) Manual. |