WenmarOpen by Wenmar Pro

Service bulletin A18070D

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10143333
Published by NHTSA2018-08-06
Manufacturer's numberA18070D
Manufacturer's date2018-07-12
NHTSA componentEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; ENGINE; EQUIPMENT:ELECTRICAL

NHTSA's summary

Servicenews article - Until recently, Tech Line had only two categories for auto idle stop system issues. That made it hard for our engineering staff to understand what was specifically inhibiting the system. To help with this, Tech Line has added more categories to match what's listed in the service information. As a result, when calling them for an auto idle stop issue, you must now send a snapshot. Tech Line needs it for troubleshooting and won't be able to help unless you do.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Engine, Equipment and accessories, Labels and manuals

Vehicles listed
HONDA ODYSSEY2018
HONDA PILOT2016, 2017, 2018

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
23V7510002023-11-13. ENGINE AND ENGINE COOLING:ENGINE:HARD PARTS INTERNAL/MECHANICAL
20236032023-11-08. Engine
19V2980002019-04-12. ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:BELTS AND ASSOCIATED PULLEYS

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
A23-0092025-07-09. Service bulletin. Service Bulletin - Under certain circumstances, after coming to a stop and engaging idle stop, the vehicle may not restart automatically due to excessive cylinder pressure and/or low cranking torque. Typically, the customer can immediately restart the vehicle by selecting Park and pressing the ENGINE START/STOP button.
A23-0782025-06-05. Service bulletin. Service Bulletin - Torque converters may not have been manufactured to proper specifications. As a result, the torque converter lock-up clutch cannot provide adequate holding force due to pressure bleeding down through a crack in the lock-up piston. The reduced lock-up clutch capacity results in the transmission indicator flashing “D” and set DTC P0741 Torque Converter Clutch Performance or Stuck OFF.
A23-0782025-06-05. Service bulletin. Service Bulletin - Torque converters may not have been manufactured to proper specifications. As a result, the torque converter lock-up clutch cannot provide adequate holding force due to pressure bleeding down through a crack in the lock-up piston. The reduced lock-up clutch capacity results in the transmission indicator flashing “D” and set DTC P0741 Torque Converter Clutch Performance or Stuck OFF.
A23-0782025-04-29. Service bulletin. Service Bulletin - Torque converters may not have been manufactured to proper specifications. As a result, the lock-up clutch cannot provide adequate holding force due to pressure bleeding down through a crack in the lock-up piston. The reduced lock-up clutch capacity results in the transmission indicator flashing “D” and set the DTC P0741 Torque Converter Clutch Performance or Stuck OFF.
AEBM041820259012025-04-29. Other. Dealer Message - Torque converters may not have been manufactured to proper specifications. As a result, the torque converter lock-up clutch cannot provide adequate holding force due to pressure bleeding down through a crack in the lock-up piston. The reduced lock-up clutch capacity results in the MIL not illuminating. “D” flashes and “Transmission Overheat” message appears setting DTC P0741 Torque Converter Clutch Circuit Performance or Stuck OFF.
ONL6AX022025A2025-03-05. Other. Owner Notification Letter - Under certain circumstances, after coming to a stop and the idle stop feature engaging, your vehicle may not automatically restart.
A16-0132024-09-10. Service bulletin. Service Bulletin - Drivers may experience a chirping sound coming from the engine area with the engine warmed up due to the high pressure fuel pump is making a chirp.
A24-0852024-07-26. Service bulletin. Service Bulletin - MIL flashes and vehicle will not accelerate, low power. After cycling the ignition, the symptom does not return with no stored DTCs. This issue is more common in regions with cold weather (specifically near or below freezing temperatures). Usually after a long drive (around 2 hours) and accelerating while cornering.
A24-0852024-07-01. Service bulletin. Service Bulletin - The MIL flashes and vehicle will not accelerate, low power. After cycling the ignition, the symptom does not return with no stored DTCs. This issue is more common in regions with cold weather (specifically near or below freezing temperatures). Usually after a long drive (around 2 hours) and accelerating while cornering. Moisture accumulation in the intake manifold during long drives gets drawn into the combustion chamber while cornering, causing misfires.
ONL6AX01102024A2024-01-17. Service bulletin. Owner Notification Letter - Under certain circumstances, after coming to a stop and the idle stop feature engaging, your vehicle may not automatically restart.