Service bulletin NTB17-091

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
Type	Service bulletin
NHTSA id	10119253
Published by NHTSA	2017-10-15
Manufacturer's number	NTB17-091
Manufacturer's date	2017-08-08
NHTSA component	SERVICE BRAKES, AIR:SUPPLY:CHECK VALVE

NHTSA's summary

2013-2017 ALTIMA AND 2014-2017 ROGUE; MIL ON WITH DTC P2004 STORED IF YOU CONFIRM MIL is ON with P2004 (INTAKE MANIFOLD RUNNER CONTROL VALVE POSITION SENSOR) stored. And There are no drivability issues. ACTION 1. Remove the intake manifold. 2. Replace the intake manifold runner control valve position sensor. 3. Re-install intake manifold.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Brakes

Trouble codes named

P2004

Vehicles listed
NISSAN ALTIMA	2013, 2014, 2015, 2016, 2017
NISSAN ROGUE	2014, 2015, 2016, 2017

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
22V549000	2022-07-28. SERVICE BRAKES, HYDRAULIC:POWER ASSIST:HYDRAULIC
2019090	2019-02-26. Brakes
15V733000	2015-11-05. SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:CALIPER
15V012000	2015-01-14. SERVICE BRAKES

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
NTB19-042F	2025-02-25. Service bulletin. AUTOMATIC EMERGENCY BRAKING WARNING LIGHT BLINKING APPLIED SYSTEMS: Vehicles equipped with a lane camera (see Figure 1) SERVICE INFORMATION If the Automatic Emergency Braking (AEB) warning light or is blinking (but not illuminated steadily) or the customer states it is blinking, and there are no related DTCs, inspect the windshield. A blinking AEB warning light may occur under the following conditions: • When contamination or foreign material adhere to the lane camera viewing window on the windshield. • When driving while it is snowing or when frost forms on the lane camera viewing window on the windshield. • When the lane camera viewing window on the windshield is temporarily fogged up. Figure 1 Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle. HINT: o Refer to the applicable ESM for diagnosis if DTCs are present in the Laser/Radar, ICC/ADAS, or Lane Camera systems. o For further information: • Refer to the following pages. • Use the search keyword “blinking” in the ESM.
NTB19-033G	2025-02-25. Service bulletin. INTELLIGENT CRUISE CONTROL INOPERATIVE AND AEB/FEB WARNING LIGHT ON OR RADAR OBSTRUCTION MESSAGE DISPLAYED WITH DTC C1A16 OR C2582 IF YOU CONFIRM IMPORTANT: The purpose of ACTION (on the next page) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair. Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle. The customer states that the ICC stopped working while driving, OR The customer states that the AEB/FEB warning light is ON, or turned ON, while driving (Figure 1), OR The message “Unavailable Front Radar Obstruction” or “Forward Driving Aids Temporarily Disabled Front Sensor Blocked See Owner's Manual” has displayed while driving (Figure 2). AND DTC C1A16, C1A16-97, C2582, or C2582-97 is the ONLY DTC stored. Figure 1 Figure 2 This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. Forward Driving Aids Temporarily Disabled Front Sensor Blocked See Owner’s Manual
NTB22-080	2024-09-18. Service bulletin. CAMPAIGN BULLETIN Hydraulic Brake Booster Voluntary Safety Recall Campaign Reference: R22A6 Date: September 18, 2024 Attention: Dealer Principal, Sales, Service & Parts Managers SAFETY RECALL CAMPAIGN ID: R22A6 \| REVISION 3 *** Campaign Summary *** Nissan is committed to the safety and security of our customers and their passengers. Nissan has notified the National Highway Traffic Safety Administration (NHTSA) that it is recalling certain MY2017-2019 Nissan Rogue Hybrid vehicles to address a hydraulic brake booster concern. Frequent braking in a short period of time, combined with high engine room temperatures can lead to the failure of the hydraulic brake booster motor. If this condition occurs, the customer may observe the illumination of the brake warning light (with buzzer) and the brake pedal will be hard to depress. Dealers will replace the hydraulic brake booster power supply unit. IMPORTANT: It is a violation of Federal law for dealers to sell or deliver new vehicles in their inventory covered by this notification until the campaign’s remedy action is performed.): REVISION 3 Please discard earlier versions of this bulletin. The announcement from November 7, 2023 has been revised to include the following: • Nissan is requesting that dealers return excess inventory of parts that apply to this campaign if they are not needed. • The parts return request has been updated to include part number 47212-4CE0A and has been added to the table under the “Service Parts Return” section of this dealer announcement. • Follow the instructions under the “Service Parts Return” section of this dealer announcement for information on how to return excess inventory of these parts: • Nissan is requesting dealers to check their parts inventories for any of the part numbers listed in the table below under the “Service Parts Return” section. • If any of these parts are found in your inventory and they will not be needed, please return to your facing PDC per the instructions below. • These returns will not affect the dealer’s obsolescence accrual. Affected Models/Years: Affected Population: Dealer Inventory: SERVICE COMM Activation date: Stop Sale In Effect 2017-2019 Rogue Hybrid (T32H) 5,903 NA July 29, 2022 YES
NTB10-145B	2023-04-06. Service bulletin. ABS/VDC CAN DIAGNOSIS INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB14114A	2021-05-10. Service bulletin. IF YOU CONFIRM All "hands free" functions of the Intelligent Key (I-Key) do not work. For example, the doors will not lock or unlock when pressing either front door request switch. NOTE: - The issue of all I-Key "hands free" functions not working may occur intermittently or all the time. - The message "No Key Detected" or similar may show on the Vehicle Information Display (located in the combination meter). - All I-Key remote button functions (door lock/unlock, etc.) WILL work normally when all I-Key "hands free" functions are NOT working. ACTION 1. Inspect the I-Key?s battery on its negative contact side. 2. If excessive scratching is found, replace the battery. 3. Verify all I-Key functions (both "hands free" and remote) work properly after battery replacement. NOTE: Do NOT replace the BCM, I-Key, or other parts for the issue described under IF YOU CONFIRM, if it should occur. See this bulletin for further detail.
NTB13088A	2021-05-10. Service bulletin. SERVICE INFORMATION This bulletin has compiled Tire Pressure Monitor System (TPMS) and Low Tire Pressure Warning System (LTPWS) information for: - Basic diagnosing of TPMS/LTPWS systems - Radio frequency interference causing a "No Data" (C1708, C1709, C1710, C1711) condition - Sensor leaks - Moving TPMS/LTPWS wheel assemblies from one vehicle to another and TPMS/LTPWS sensor registration - Air pressure changes with altitude and ambient temperatures - Aftermarket tire sealers - Aftermarket wheels - Inflating/deflating tires with TPMS/LTPWS sensors See this bulletin for further detail.
NTB15060	2021-05-10. Service bulletin. SERVICE INFORMATION When servicing run flat tires or low profile tires: - Special equipment and procedures are required to avoid damage. - Specifically, Tire Pressure Monitor transmitters (TPMS sensors) can be damaged when improperly dismounting and mounting tires. - TPMS sensors becoming damaged during mounting or dismounting tires are not covered under warranty. - To avoid such damage, ensure that the tire changer being used and the operator of the tire changer is capable of servicing run flat and low profile tires. - Operator?s manuals for such tire changers must be followed. See this bulletin for further detail.
NTB15047B	2021-05-10. Service bulletin. IF YOU CONFIRM: * The outside brake pad (pad furthest from caliper piston) of the right rear brake caliper has excessive wear or noise. And * There IS NOT a "stamping mark" on the Torque Member (shown and described in Figure 1, page 2). NOTE: This stamping mark can be on either the right or left machined surface of the Torque Member. This bulletin does not apply if stamping mark is present as described in Figure 1. Please see this bulletin for further details.
NTB12118A	2021-05-10. Service bulletin. IF YOU CONFIRM A squeal/squeak noise is coming from the rear brakes: - When the brakes are either hot (after 10-15 minutes of driving) or cold (after vehicle has not been driven for 2-3 hours), - while moving forward or in reverse, - at speeds less than 10 MPH, - while traveling straight, AND - with light to moderate brake application (pedal pressure). NOTE - These are the typical conditions in which to duplicate the rear brake squeal/squeak; however, these conditions are not intended to detail all of the possible conditions in which the noise may occur. When attempting to duplicate this noise it is important to have a second person safely standing outside of the vehicle to determine if the noise is coming from the front or rear brakes. ACTION Replace the rear brake pads and the rear brake hardware kit with the parts listed in the Parts Information section of this bulletin. - Refer to the Electronic Service Manual (ESM), section BR - Brake System, for removal and installation information. See this bulletin for further detail.
NTB13083	2021-05-10. Service bulletin. SERVICE INFORMATION To use the Apps feature: - The customer must be signed into the NissanConnect App and have it open (in the background is okay) on the phone before pressing the Apps button on the audio system. - If the NissanConnect App is not open on the phone when the Apps button is pressed, the screen shown in Figure 1 will display and the Apps mode will not function. If a customer has not set up their NissanConnect App account, perform the steps in this bulletin. See this bulletin for further detail.