Transport Canada recall 2019090
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | Transport Canada (Canada) |
|---|---|
| Campaign number | 2019090 |
| Manufacturer's number | PC680 / P9327 |
| Reported | 2019-02-26 |
| Component | Brakes |
| Notification type | Safety TC |
| Units potentially affected | 75356 |
What is wrong
Issue:
In certain driving situations, a metal structure like a railroad crossing or overhead sign could cause the Automatic Emergency Braking system (AEB) to activate when it is not needed. If this happens, the system would provide a collision warning. If the driver takes no action, the vehicle could slow suddenly or come to a complete stop.
Safety Risk:
If the AEB system activates with braking when no potential collision is present, it could increase the risk of a crash.
Corrective Actions:
The company will send a letter to owners to explain this issue. Owners will be informed that a software update is available for the AEB system. This update can be installed at a dealership at no charge to the owner.
| 2017 NISSAN QASHQAI | |
|---|---|
| 2018 NISSAN QASHQAI | |
| 2017 NISSAN ROGUE | |
| 2018 NISSAN ROGUE |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| NTB19-042F | 2025-02-25. Service bulletin. AUTOMATIC EMERGENCY BRAKING WARNING LIGHT BLINKING APPLIED SYSTEMS: Vehicles equipped with a lane camera (see Figure 1) SERVICE INFORMATION If the Automatic Emergency Braking (AEB) warning light or is blinking (but not illuminated steadily) or the customer states it is blinking, and there are no related DTCs, inspect the windshield. A blinking AEB warning light may occur under the following conditions: • When contamination or foreign material adhere to the lane camera viewing window on the windshield. • When driving while it is snowing or when frost forms on the lane camera viewing window on the windshield. • When the lane camera viewing window on the windshield is temporarily fogged up. Figure 1 Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle. HINT: o Refer to the applicable ESM for diagnosis if DTCs are present in the Laser/Radar, ICC/ADAS, or Lane Camera systems. o For further information: • Refer to the following pages. • Use the search keyword “blinking” in the ESM. |
|---|---|
| NTB19-033G | 2025-02-25. Service bulletin. INTELLIGENT CRUISE CONTROL INOPERATIVE AND AEB/FEB WARNING LIGHT ON OR RADAR OBSTRUCTION MESSAGE DISPLAYED WITH DTC C1A16 OR C2582 IF YOU CONFIRM IMPORTANT: The purpose of ACTION (on the next page) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair. Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle. The customer states that the ICC stopped working while driving, OR The customer states that the AEB/FEB warning light is ON, or turned ON, while driving (Figure 1), OR The message “Unavailable Front Radar Obstruction” or “Forward Driving Aids Temporarily Disabled Front Sensor Blocked See Owner's Manual” has displayed while driving (Figure 2). AND DTC C1A16, C1A16-97, C2582, or C2582-97 is the ONLY DTC stored. Figure 1 Figure 2 This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. Forward Driving Aids Temporarily Disabled Front Sensor Blocked See Owner’s Manual |
| NTB22-080 | 2024-09-18. Service bulletin. CAMPAIGN BULLETIN Hydraulic Brake Booster Voluntary Safety Recall Campaign Reference: R22A6 Date: September 18, 2024 Attention: Dealer Principal, Sales, Service & Parts Managers SAFETY RECALL CAMPAIGN ID: R22A6 | REVISION 3 ***** Campaign Summary ***** Nissan is committed to the safety and security of our customers and their passengers. Nissan has notified the National Highway Traffic Safety Administration (NHTSA) that it is recalling certain MY2017-2019 Nissan Rogue Hybrid vehicles to address a hydraulic brake booster concern. Frequent braking in a short period of time, combined with high engine room temperatures can lead to the failure of the hydraulic brake booster motor. If this condition occurs, the customer may observe the illumination of the brake warning light (with buzzer) and the brake pedal will be hard to depress. Dealers will replace the hydraulic brake booster power supply unit. IMPORTANT: It is a violation of Federal law for dealers to sell or deliver new vehicles in their inventory covered by this notification until the campaign’s remedy action is performed.): REVISION 3 Please discard earlier versions of this bulletin. The announcement from November 7, 2023 has been revised to include the following: • Nissan is requesting that dealers return excess inventory of parts that apply to this campaign if they are not needed. • The parts return request has been updated to include part number 47212-4CE0A and has been added to the table under the “Service Parts Return” section of this dealer announcement. • Follow the instructions under the “Service Parts Return” section of this dealer announcement for information on how to return excess inventory of these parts: • Nissan is requesting dealers to check their parts inventories for any of the part numbers listed in the table below under the “Service Parts Return” section. • If any of these parts are found in your inventory and they will not be needed, please return to your facing PDC per the instructions below. • These returns will not affect the dealer’s obsolescence accrual. Affected Models/Years: Affected Population: Dealer Inventory: SERVICE COMM Activation date: Stop Sale In Effect 2017-2019 Rogue Hybrid (T32H) 5,903 NA July 29, 2022 YES |
| NTB10-145B | 2023-04-06. Service bulletin. ABS/VDC CAN DIAGNOSIS INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| PC651 | 2018-12-10. Service bulletin. CAMPAIGN BULLETIN Rear Brake Hose Bracket *****Dealer Announcement***** Nissan is conducting a quality action to inspect 1,120 specific 2018.5 Rogue and Rogue Hybrid vehicles identified in Service Comm, and if necessary, tighten the rear brake hose bracket fasteners to the specification. Affected vehicles are not subject to stop sale and are either currently in dealer inventory or assigned and in transit to the dealer. Nissan requests dealers to complete this inspection and, if necessary, repair prior to sale to ensure customer satisfaction. *****What Dealers Should Do***** PLEASE FOLLOW THE ATTACHED REPAIR INSTRUCTIONS: 1. Verify if vehicles currently in new dealer inventory are affected by this service action using Service Comm I.D. PC651 - New vehicles in dealer inventory can also be identified using DCS (Sales-> Vehicle Inventory, and filter by Open Campaign). - Refer to NPSB 15-460 for additional information - Please continue to check newly arriving inventory for campaign applicability. 2. Use the attached procedure to inspect the vehicle. - Do not file a claim if the bracket is loose (moveable by hand) or the bolt(s) are missing. Additional Steps are required for a Loose Bracket or Missing bolts. - Email the following information to: nnafqasupport@nissan-usa.com - E-mail subject line: PC651 Rear Brake Hose Bracket - Attach clear pictures of bracket - Dealer Name: - Dealer Code: - Dealer Address: - VIN: - Contact Person Name: - Contact Person Phone Number: - Continue to HOLD the vehicle. |
| NTB17-091 | 2017-10-15. Service bulletin. 2013-2017 ALTIMA AND 2014-2017 ROGUE; MIL ON WITH DTC P2004 STORED IF YOU CONFIRM MIL is ON with P2004 (INTAKE MANIFOLD RUNNER CONTROL VALVE POSITION SENSOR) stored. And There are no drivability issues. ACTION 1. Remove the intake manifold. 2. Replace the intake manifold runner control valve position sensor. 3. Re-install intake manifold. |
| NTB17-082a | 2017-10-15. Service bulletin. NISSAN; DTC P0456 CAUSED BY EVAP LEAK AT VENT CONTROL VALVE O-RING This bulletin has been amended. The APPLIED VEHICLES and CLAIMS INFORMATION sections have been revised. No other changes have been made. Please discard previous versions of this bulletin. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.