WenmarOpen by Wenmar Pro

Service bulletin 08-062-16 REV.A

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10080402
Published by NHTSA2016-09-19
Manufacturer's number08-062-16 REV.A
Manufacturer's date2016-06-29
NHTSA componentSEATS

NHTSA's summary

"FRONT SEAT BOTTOM CUSHION HARD OR LUMPY SPOT THIS BULLETIN INVOLVES REPLACING THE SEAT CUSHION, HEATED PADS, HEATED SEAT MODULE, VENTILATED SEAT PAD AND OCCUPANT CLASSIFICATION MODULE. THE CUSTOMER MAY STATE THE SEAT BOTTOM CUSHION IS UNCOMFORTABLE OR MAY ALSO FEEL A HARD OR LUMPY SPOT IN THE CUSHION."

The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

Components

Seats

Vehicles listed
CHRYSLER 2002015

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
16V1140002016-02-26. AIR BAGS:SENSOR:OCCUPANT CLASSIFICATION; SEATS

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
08062162022-12-19. Service bulletin. Front Seat Bottom Cushion Hard Or Lumpy Spot
90045092022-12-19. Service bulletin. Oil Filter If a Mopar Oil Filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils. Recommended Brands: Wix, Purolator, and NapaGold For concerns of V8 oil filter leaks on 22MY and up vehicles: 1. Clean the area and use oil dye to know the exact location of the leak with black/UV light. 2. Removal torque (force needed to loosen the filter) 3. If the source of the leak cannot be identified, please contact FCA Redacted Content to FasTrak parts back for analysis. If no response in 15 minutes, proceed with repair and email pictures of the following: A) Oil filter from the bottom to know if it has a "Factory Installed" filter. B) Leak. C) Damage in filter (if any) D) Gasket. E) Block or Oil Filter Adapter(OFA) or Engine Oil Cooler(EOC) sealing surface.
10001202022-10-17. Service bulletin. Airbag Warning Lamp (AWL) Illuminated B0028-13 and B0020-13 This bulletin involves inspecting and installing a jumper harness in the front seats if needed. Customers may experience a AWL illumination. Upon further investigation, the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) set in memory:B0028-13 - Right Side Seat Deployment Squib 1 - Circuit Open. B0020-13 - Left Side Seat Deployment Squib 1 - Circuit Open.
08062162022-09-26. Service bulletin. Bottom seat may be uncomfortable or, feel a hard/lumpy spot in the cushion.
08-062-162021-05-03. Service bulletin. Bottom seat may be uncomfortable or, feel a hard/lumpy spot in the cushion.
10-001-202020-11-30. Service bulletin. Airbag Warning Lamp (AWL) Illuminated B0028-13 and B0020-13 This bulletin involves inspecting and installing a jumper harness in the front seats if needed. Customers may experience a AWL illumination. Upon further investigation, the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) set in memory:B0028-13 - Right Side Seat Deployment Squib 1 - Circuit Open. B0020-13 - Left Side Seat Deployment Squib 1 - Circuit Open.
08-065-152018-12-10. Service bulletin. Front Seat Bottom Cushion Hard Or Lumpy Spot This bulletin involves replacing both seat cushion heated pads and heated seat module then reconfiguring the vehicle. The customer may state the seat bottom cushion is uncomfortable because of a hard or lumpy spot in the bottom seat cushion.
68264880A$2018-05-07. Service bulletin. Occupant Restraint Controller (ORC) For PF, KL or UF Vehicles ONLY:~ Prior to replacing ORC part numbers, please contact FCA engineering if the following Diagnostic trouble codes are Stored or Active in the ORC module:~ DTC: B223D-00 - OCM DTC Present~ DTC: B0050-13 - Driver Seatbelt Sensor-Circuit Open~ DTC: B0052-13 - Passenger Seatbelt Sensor-Circuit Open~ DTC: B00B5-13 - Driver Seat Track Position Restraints Sensor-Circuit Open~ DTC: B00C5-13 - Passenger Seat Track Position Restraints Sensor-Circuit Open~ DTC: B0028-13 - Right Side Seat Deployment Squib 1-Circuit Open~ DTC: B0020-13 - Left Side Seat Deployment Squib 1-Circuit Open~ Execute DealerCONNECT / TechCONNECT Diagnostic Procedures to assess potential defects to devices connected to the ORC Module depending on the active or stored Diagnostic Trouble Code. If no defects are detected, verify wiring connectivity between the ORC Module and the component associated with the Diagnostic Trouble Code. Investigate connector pins and wire harness terminals for bent,corroded,or spread conditions. If no response within 15 minutes, proceed with repair.~ FCA Engineering Contacts:~ Jay Nagle (ORC Module, OCM module, Driver/passenger seat track position sensor for PF, KL or UF Vehicles ONLY) @ cell (248) 420-4294 or jay.nagle@external.fcagroup.com~ Bill Winfrey (Driver/Passenger Buckle Switch, Passenger/Driver Seat Thorax Airbags) @ cell (248) 941-9221 or william.winfrey@fcagroup.com