Service bulletin SB-08-006-14
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10055428 |
| Published by NHTSA | 2014-05-21 |
| Manufacturer's number | SB-08-006-14 |
| Manufacturer's date | 2014-01-18 |
| NHTSA component | VISIBILITY:REARVIEW MIRRORS/DEVICES:EXTERIOR |
NHTSA's summary
DODGE: WHEN TRYING TO ADJUST MIRRORS TO HORIZONTAL/VERTICAL POSITION, ON SOME TRUCKS, WOULD MOVE BACKWARDS TO SWITCH INPUT, WHEN USING IN TRAILER TOW POSITION. MODEL 2014 RAM PU (2300, 2500). *PE
The document
No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.
Components
Glass, wipers and mirrors, Mirrors
| RAM 2500 | 2014 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 0809714 | 2023-02-21. Service bulletin. Mirror Tilt In Reverse Feature Is Not Functioning Correctly |
|---|---|
| S1623000028RevE | 2022-09-15. Service bulletin. Outside Power Fold Rearview Mirror Noise Or Loose At Pivot |
| 9003216 | 2022-08-08. Service bulletin. Power Fold Rearview Mirror Prior to replacing this part for a loose mirror, please first follow this procedure to reset the pivot mechanism. Move the mirror to its full foward position and then to full retract position using the power fold mirror button located on drivers side door panel. Perform this procedure three times. If this doesn't resolve the issue, then repair as necessary.~ Note: 1- The looseness of power fold mirror does not necessary indicate a defective mirror, it may be caused by folding it manually rather than using the power fold feature. If the mirror is adjusted manually out of the proper detent, always use the button to adjust it back into sync.~ 2- The intended use of the power fold mirrors is by pushing the button to fold and unfold the mirror. Only manually fold the mirrors when absolutely necessary.~ 3- In the circumstance where the left hand mirror and right hand mirror are in different positions, it may take up to three cycles (bottom pushes) to re-sync the mirrors together. |
| D-16-28 Rev. A | 2018-06-11. Service bulletin. DAPAP Requirements - Addition of Exterior Mirrors (Rev. A) |
| 9003216 | 2018-06-11. Service bulletin. Power Fold Rearview Mirror Prior to replacing this part for a loose mirror, please first follow this procedure to reset the pivot mechanism. Move the mirror to its full foward position and then to full retract position using the power fold mirror button located on drivers side door panel. Perform this procedure three times. If this doesn't resolve the issue, then repair as necessary.~ Note: 1- The looseness of power fold mirror does not necessary indicate a defective mirror, it may be caused by folding it manually rather than using the power fold feature. If the mirror is adjusted manually out of the proper detent, always use the button to adjust it back into sync.~ 2- The intended use of the power fold mirrors is by pushing the button to fold and unfold the mirror. Only manually fold the mirrors when absolutely necessary.~ 3- In the circumstance where the left hand mirror and right hand mirror are in different positions, it may take up to three cycles (bottom pushes) to re-sync the mirrors together. |
| 5RR541XRA | 2018-06-11. Service bulletin. Power Fold Rearview Mirror Prior to replacing this part for a loose mirror, please first follow this procedure to reset the pivot mechanism. Move the mirror to its full forward position and then to full retract position using the power fold mirror button located on drivers side door panel. Perform this procedure three times. If this doesn't resolve the issue, then repair as necessary.~ Note: 1- The looseness of power fold mirror does not necessary indicate a defective mirror, it may be caused by folding it manually rather than using the power fold feature. If the mirror is adjusted manually out of the proper detent, always use the button to adjust it back into sync.~ 2- The intended use of the power fold mirrors is by pushing the button to fold and unfold the mirror. Only manually fold the mirrors when absolutely necessary.~ 3- In the circumstance where the left hand mirror and right hand mirror are in different positions, it may take up to three cycles (bottom pushes) to re-sync the mirrors together. |
| 08-097-14 | 2018-06-11. Service bulletin. Mirror Tilt In Reverse Feature Is Not Functioning Correctly This bulletin involves reconfiguring the vehicle for proper mirror tilt in reverse operation. The customer may describe one mirror tilting in reverse and the other mirror not tilting and/or the customer may describe not being able to turn the tilt in reverse feature on/off. |
| 68302824A$ | 2018-06-11. Service bulletin. Auxiliary Lamp, Outside Mirror The Auxiliary Lamp (Puddle Lamp) in the outside rearview mirror has been revised. Ensure it visually matches the Puddle Light on the opposite mirror. If not, both sides will need to be replaced |