Transport Canada recall 2020136
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | Transport Canada (Canada) |
|---|---|
| Campaign number | 2020136 |
| Manufacturer's number | R20A6 / PC740 |
| Reported | 2020-03-31 |
| Component | Airbag |
| Notification type | Safety Mfr |
| Units potentially affected | 18553 |
What is wrong
Issue:
On certain vehicles, the driver-front airbag inflator could be defective. This could cause the airbag to deploy with more force than normal. It could also cause the inflator to rupture. If the airbag inflator ruptures, fragments could be propelled toward the occupants or cause damage to the airbag and prevent it from inflating properly.
Safety Risk:
If the vehicle is involved in a crash where the airbag deploys, the airbag inflator could rupture and create a risk of injury or death.
Corrective Actions:
The company will notify owners by mail and instruct you to take your vehicle to a dealer to replace the driver-front airbag inflator or airbag module.
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| ITB19-024D | 2024-10-22. Service bulletin. DTC B00A0-00 STOREIF YOU CONFIRM DTC B00A0-00 (OCCUPANT DETECTION SENSOR UNIT) is stored, AND OCS zero point reset cannot be performed, (continued on the next page)D |
|---|---|
| ITB19-024B | 2022-05-20. Service bulletin. DTC B00A0-00 STORED This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| ITB10037D | 2021-05-10. Service bulletin. SERVICE INFORMATION The Applied Vehicles are equipped with a new version of Intelligent Key presets memory. Each Intelligent Key can be programmed to have its own unique set of presets for certain vehicle systems. Vehicle systems that are linked with Intelligent Key include: - Automatic Drive Positioner (includes driver seat, steering column, and mirror position memory) - Audio (station presets, etc.) - Auto air conditioning and heating (retains the last temperature and mode setting for each Intelligent Key user) - Navigation system (retains the last settings [e.g., Birdview] and clock display preference for each Intelligent Key user) See this bulletin for further detail. |
| NTB15036 | 2021-05-10. Service bulletin. SERVICE INFORMATION The applied vehicles are equipped with automatic door locks that lock all doors when the vehicle speed reaches 15 MPH. There is no instruction in the Owner?s Manual on auto-lock function deactivation. All doors unlock automatically when the ignition is placed in the OFF position (models with Intelligent Key system) or when the key is removed from the ignition switch (models without Intelligent Key system). The auto-unlock function can be deactivated by the driver in accordance with Owner?s Manual Instructions. Please see this bulletin for further details. |
| ITB00031D | 2021-05-10. Service bulletin. SERVICE INFORMATION Changes or modifications to the front seat assembly trim materials may affect the proper operation of the Front Seat-Mounted Side-Impact Supplemental Air Bags and Passenger Occupant Classification Sensor and could result in serious personal injury or death. Infiniti STRONGLY RECOMMENDS AGAINST making any change to seat trim materials from the factory equipped condition. This specifically applies to replacing the seat trim with non-factory materials; adding leather/cloth seat covers, seat pads, or seat storage pouches, etc. around or over the seat back and the passenger seat cushion. See this bulletin for further detail. |
| NTB00042D | 2021-05-10. Service bulletin. SERVICE INFORMATION Changes or modifications to the front seat assembly trim materials may affect the proper operation of the Front Seat-Mounted Side-Impact Supplemental Air Bags and Passenger Occupant Classification Sensor and could result in serious personal injury or death. Nissan STRONGLY RECOMMENDS AGAINST making any change to seat trim materials from the factory equipped condition. This specifically applies to replacing the seat trim with non-factory materials; adding leather/cloth seat covers, seat pads, or seat storage pouches, etc. around or over the seat back and the passenger seat cushion. See this bulletin for further detail. |
| NTB14096 | 2021-05-10. Service bulletin. SERVICE INFORMATION If DTC B00A0 (OCCUPANT CLASSIFICATION SYSTEM CONTROL UNIT) is set as current in the Air Bag Diagnosis Sensor Unit: * Follow the "DTC/CIRCUIT DIAGNOSIS" procedure for DTC B1017-B1022 (OCCUPANT SENS C/U) to repair the vehicle. Please see this bulletin for further details. |
| ITB08024C | 2021-05-10. Service bulletin. SERVICE INFORMATION Information necessary to service the Supplemental Restraint System (SRS) safely is included in the "RESTRAINTS" section of the Electronic Service Manual (ESM) for each vehicle IMPORTANT: Turn the ignition switch OFF, disconnect both battery terminals, and wait at least 3 minutes before performing any service on the SRS. See this bulletin for further detail. |
| NTB08055C | 2021-05-10. Service bulletin. SERVICE INFORMATION Information necessary to service the Supplemental Restraint System (SRS) safely is included in the "RESTRAINTS" section of the Electronic Service Manual (ESM) for each vehicle. IMPORTANT: Turn the ignition switch OFF, disconnect both battery terminals, and wait at least 3 minutes before performing any service on the SRS. See this bulletin for further detail. |
| NTB13068 | 2021-05-10. Service bulletin. IF YOU CONFIRM The "Comfort" option under the Non-Navigation system's user configurable settings menu is missing from the scroll down menu, which includes: Auto Interior Illumination, Light Sensitivity, Light Off Delay, Speed Sensing Wiper Interval, Selective Door Unlock, and Return all Settings to Default ACTION 1. Follow the SERVICE PROCEDURE to load the Reprogramming Software DVD referenced in PARTS INFORMATION. 2. Read configuration, initialize, and then manually configure the MULTI AV system with the setting in this bulletin. See this bulletin for further detail. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.