Transport Canada recall 2017220
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | Transport Canada (Canada) |
|---|---|
| Campaign number | 2017220 |
| Reported | 2017-04-21 |
| Component | Electrical |
| Notification type | Safety Mfr |
| Units potentially affected | 1 |
What is wrong
Certain vehicles may have received incorrect module coding updates between December 3rd, 2016 and December 5th, 2016 during vehicle servicing. Depending on which vehicle control unit was improperly coded, the potential malfunctions could differ. In some cases, the improper coding could potentially affect functions of the Electronic Stability Control system (ESC), such as the HOLD function, or the trailer stabilization, and the distance control unit assistance system. In other cases, certain airbag control unit functions could be affected, such as the seat belt buckle status not being properly recognized. Furthermore another potential result of the incorrect coding, is that some powertrain scopes could be affected, which could lead to an engine failure or the loss of the speed limiter function. These conditions could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will update the coding of the affected control units.
| 2016 MERCEDES-BENZ METRIS |
|---|
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| LI82.85-N-074054 | 2023-08-02. Service bulletin. The connection of the customer's smartphone connected via the original USB cable is disconnected after an undefined period of time for no apparent reason. The Apple iPhone 12 and subsequent models are primarily affected by this. Hardware for radio control unit (Audio) (N87/15) Modification to hardware for radio control unit (Audio) (N87/15). Note: In isolated cases, the replacement chain is not depicted correctly in XENTRY Parts Information (XPI). Please ensure that one of the following replacement part numbers (suitable for the vehicle equipment) is ordered: • Audio30 - A4479002421 • Audio40 - A4479002721 Note: Please refer to this LI in the "Notes" section of the warranty claim |
|---|---|
| LI00.19-N-075749 | 2023-02-03. Service bulletin. Complaint Various issues including control unit programming procedure will not complete successfully/no newer software found, communication faults, or sporadic malfunction of systems. Cause Aftermarket CAN device could be installed into the vehicle's CAN network. Such devices can be but are not limited to, remote start modules, CAN blockers, or high idle modules. Remedy A successful control unit programming session cannot be ensured while aftermarket devices are connected to the vehicle's CAN network. Some of the device companies supply a bypass to allow control unit programming. |
| LI54.65-N-075675 | 2023-01-05. Service bulletin. Complaint Camera cover of reversing camera does not fold in (see Picture 01, shown on vehicle with code W65 (Tailgate)). Remedy Note: Do not replace any component parts or carry out any diagnostic work! Model 447.6/7 (Metris) As of the introduction of code FR1 (Rearview camera, non-folding), the folding function of the reversing camera is no longer available (discontinuation of camera cover (KAB) control unit (N144)). Consequently, the reversing camera remains open/folded out at all times. The representation of the camera image on the media display of the radio/radio- navigation (N87/15) is not restricted and functions in the usual way. Information: There are no plans for a retrospective adaptation of the folding function through Aftersales. |
| LI82.85-N-074054 | 2022-01-06. Service bulletin. "Audio 30/40 VIS (Garmin) head unit - Con- nection failure with smartphone integration " |
| Initial NCU-PDGH | 2021-03-15. Service bulletin. Initial NCU-eCall Software Update |
| Launch NCU-VSXHE | 2021-03-15. Service bulletin. "eCall" Hermes Software Update |
| Launch NCU - 202 | 2021-03-01. Service bulletin. Mercedes-Benz AG (?MBAG?), the manufacturer of Mercedes-Benz, has determined that on certain Model Year (?MY?) 2013-2017 B-Class, C-Class, CLA-Class, CLS-Class, E-Class, G-Class, GL-Class, GLA-Class, GLC-Class, GLE-Class, GLK-Class, GLS-Class, GT-Class, M-Class, S-Class, SL-Class, and SLK-Class (117, 156, 166, 172, 190, 204, 205, 207, 212, 217, 218, 222, 231, 242, 253, 292, and 463 platform), the software for the PASS control unit does not meet current series production configuration and therefore the possibility exists that a correct GPS position cannot be determined in the control unit for location based services, and an incorrect vehicle position may be displayed. Please note the E-call feature is not impacted by this issue. What We?re Doing MBUSA will conduct a Service Campaign. An authorized Mercedes-Benz dealer will update the PASS Control Unit Software |
| LI82.95-N-070783 | 2020-02-24. Service bulletin. Fault message in instrument cluster "SOS not ready" - SOS button in overhead control panel flashes |
| 14CSA22 | 2017-11-17. Service bulletin. 14CSA22 DTNA Chassis Wiring Diagrams |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.