NHTSA recall 23V341000

A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.

Campaign
Published by	NHTSA (United States)
Campaign number	23V341000
Manufacturer's number	29-1639
Manufacturer	Forest River, Inc.
Reported	2023-05-12
Owners notified	2023-05-24
Component	ELECTRICAL SYSTEM: INTEGRATED TRAILER BRAKE CONTROL
Units potentially affected	63

Remedy progress the manufacturer reported
Report	Annual report 1, for 2025 quarter 2 to 2026 quarter 1
Filed with NHTSA	2026-04-28
Vehicles in the campaign	63
Reported remedied	7 (11%)
Reported unreachable	0
Reported removed	0

These are the manufacturer's totals for the whole campaign at the end of 2026 quarter 1, as filed with NHTSA. They do not say whether one vehicle has been remedied: check the VIN with the official lookups. The reports are from data as of 2026-10-19.

What is wrong

Forest River, Inc. (Forest River) is recalling certain 2022-2023 Rockport work trucks. The trailer brake controller may have been incorrectly wired.

What can happen

An incorrectly wired brake controller can result in a loss of brake function, increasing the risk of a crash.

The remedy

Dealers will rewire the trailer brake controller, free of charge. Owner notification letters were mailed May 24, 2023. Owners may contact Forest River Customer Service at 1-574-327-2392. Forest River's number for this recall is 29-1639.

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

Vehicles this campaign lists
2022 FOREST RIVER ROCKPORT
2023 FOREST RIVER ROCKPORT

A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.

Bulletins for the same vehicles and component

Bulletins for the same vehicles and component
511952F	2025-11-25. Service bulletin. According to Ford Recall 25V315/25S49: "The infotainment screen may freeze followed by a black screen and a system reboot. If this occurs during a backing event, the rear-view image may be frozen, missing, or delayed. A frozen rear-view camera display image while in reverse can reduce the driver’s view of what is behind the vehicle, increasing the risk of a crash."
511967	2025-09-26. Service bulletin. According to Ford recall 25V442 / 25S72: "On your vehicle, it may be possible an error in the SYNC software can cause SYNC system instability concerns and/or a failure to preserve certain settings across ignition cycles. This may result in an intermittent blank image while in reverse or rear-view image remaining on display after reverse driving has ended. Other non-safety related symptoms may be present such as a black infotainment screen, incorrect language setting, and/or potential inability to perform software updates. A rear-view camera that intermittently displays a blank image while in reverse can reduce the driver’s view of what is behind the vehicle, increasing the risk of a crash. A rear-view camera that remains on after the backing event has ended can distract the driver, increasing the risk of a crash."
511952	2025-08-18. Service bulletin. According to Ford Recall 25V315: "The infotainment screen may freeze followed by a black screen and a system reboot. If this occurs during a backing event, the rear-view image may be frozen, missing, or delayed. A frozen rear-view camera display image while in reverse can reduce the driver’s view of what is behind the vehicle, increasing the risk of a crash."
511946	2025-08-18. Service bulletin. According to FCA recall 25V330: "The Security Gateway Module (SGW) on your vehicle may prevent some communication between vehicle modules, which may result in the rearview image not displaying in a backing event. The vehicle operator may notice that the rearview image is not displayed if attempting to reference the image while backing. A rearview camera image that does not display reduces the driver's visibility of what is behind the vehicle and if not heeded, increases the risk of a crash."
511762	2024-05-28. Service bulletin. The routing of the main wiring harness might contact the drive shaft and chafe, which could result in a short circuit, loss of drive power, power steering, and brake control system. A short circuit increases the risk of a fire, and a loss of drive power, power steering, and brake system control increases the risk of a crash. This is in reference to Mercedes-Benz Recall Campaign 24V166.
511719	2024-02-02. Service bulletin. Per FCA Recall 23V799: "The Steering Column Control Module (SCCM) on your vehicle Ill may have a tum signal self-canceling anti-jam component out of specification, an internal short circuit on the SCCM printed circuit board (PCB), and/or a tum signal lever debouncing time limit which is too short. The SCCM in the suspect vehicles may cause the high beams to activate when using the tum signal, the turn signal to activate when using the high beams, and/or an inadvertent tum signal activation. A tum signal which remains active after a completed tum may cause surrounding drivers to misunderstand the intent to change vehicle direction. High beam activation when the tum signal switch is activated may result in reduced visibility of oncoming drivers. An inadvertent tum signal activation may cause surrounding drivers to misunderstand the intent to change vehicle direction. Any of these conditions may cause a vehicle crash without prior warning.
511680	2023-10-02. Service bulletin. According to a Furrion TSB "TB-220919": Irregular cooling performance has been reported on the identified refrigerators. The refrigerator compressor has been found to stop working and requires a “hard reset” by disconnecting power to reset cooling operation. On occasion, disconnecting power does not reset operation and the refrigerator requires service replacement of the control boards. This TSB may not be applicable for some vehicles.
511638F	2023-08-02. Service bulletin. According to GM Safety Recall N222375270/23V266: "These vehicles may have a brake pressure sensor assembly that allows brake fluid to leak beyond the diaphragm seal into the pressure switch. The brake fluid may seep into the sensor's electrical components and short the brake pressure switch and the associated fuse. If brake fluid shorts the brake pressure switch and the associated fuse, the circuit can generate excessive heat that could result in a fire, increasing the risk of injury. An under-hood fire may occur when the vehicle is off and possibly unattended."
511638	2023-07-05. Service bulletin. According to GM Safety Recall N222375270 (NHTSA Recall Number TBD): "These vehicles may have a brake pressure sensor assembly that allows brake fluid to leak beyond the diaphragm seal into the pressure switch. The brake fluid may seep into the sensor's electrical components and short the brake pressure switch and the associated fuse. If brake fluid shorts the brake pressure switch and the associated fuse, the circuit can generate excessive heat that could result in a fire, increasing the risk of injury. An under-hood fire may occur when the vehicle is off and possibly unattended."
511640	2023-07-05. Service bulletin. According to General Motors Recall 23V247: "These vehicles are equipped with an unused circuit that a final-stage manufacturer may elect to use to install an optional rear HVAC system. If the final-stage manufacturer leaves the circuit's connectors or cut wires unsealed, exposure to moisture or contamination may, over time, cause corrosion. This could result in high current draw through the circuit at the vehicles' lower left side B-pillar. Unintended release of excessive heat from the circuit may pose a risk of a vehicle fire and increase the risk of injury."