NHTSA recall 19V429000
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | NHTSA (United States) |
|---|---|
| Campaign number | 19V429000 |
| Manufacturer | Mickey Truck Bodies, Inc. |
| Reported | 2019-06-07 |
| Owners notified | 2019-05-09 |
| Component | EQUIPMENT |
| Units potentially affected | 206 |
| Report | Quarterly report 5, for 2020 quarter 2 |
|---|---|
| Filed with NHTSA | 2020-09-28 |
| Vehicles in the campaign | 206 |
| Reported remedied | 1 (0%) |
| Reported unreachable | 0 |
| Reported removed | 0 |
These are the manufacturer's totals for the whole campaign at the end of 2020 quarter 2, as filed with NHTSA. They do not say whether one vehicle has been remedied: check the VIN with the official lookups. The reports are from data as of 2026-10-19.
What is wrong
Mickey Truck Bodies, Inc. (Mickey Truck Bodies) is recalling certain 2017-2018 Ford F-750 based vehicles equipped with ASA Electronics Voyager monitors used to display the back-up camera image. The affected monitors may revert back to the factory default settings which may cause the camera image to be reversed.
What can happen
The driver may inadvertently turn the wrong direction to avoid an object behind the vehicle, increasing the risk of a crash.
The remedy
Mickey Truck Bodies will work with ASA Electronics to notify owners, and provide a remedy to keep the image from reversing, free of charge. The recall began May 9, 2019. Owners may contact ASA Electronics customer service at 1-800-384-4400 or Mickey Truck Bodies at 1-336-882-6806.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
| 2017 FORD F-750 | Built 2017-06-21 to 2018-12-28. |
|---|---|
| 2018 FORD F-750 | Built 2017-06-21 to 2018-12-28. |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| SSM 52476 | 2024-05-03. Service bulletin. All accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated (wired) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System (DPES); dealership management can authorize users. The authorized user must go to FMCDealer.com > Parts and Service > Parts Product Line Information > Keys/Entry Devices > Aftermarket Keyless Entry Keypad Code Access. Follow the instructions on the screen to obtain the master code for the accessory keypad. |
|---|---|
| 22M03 S1 | 2024-05-02. Service bulletin. Certain 2017-2020 Model Year Continental and Super Duty, 2018-2020 Navigator, 2020 Aviator, and 2020 Explorer Vehicles Replace Front and/or Side Cameras if Foggy |
| SAN-Vol1 I1 | 2023-08-16. Service bulletin. The Service Awareness Newsletter is an informal communication that contains information that may not be presently available in a TSB, SSM, GSB, or other electronic communication. This article includes information on warranty, technical service tips and other service information. |
| TSB 23-2115 | 2023-05-04. Service bulletin. Some 2015-2020 F-150 and 2017-2022 F-Super Duty vehicles may exhibit a lack of heat or cooling from the cabin vents when the climate control settings are adjusted between hot and cold. This may be due to a stuck/binding temperature door within the climate control housing or binding/inoperative temperature door actuator. Diagnostic trouble code (DTC) B1081:07 may be present in the front controls interface module (FCIM) or heating ventilation and air conditioning (HVAC) module. To correct the condition, follow the Service Procedure to remove the climate control housing and replace the temperature door cam(s), lubricate the temperature blend door bearing surface, and apply flock tape to actuator to seal out debris. |
| 21M05-S1 | 2022-07-28. Service bulletin. Certain 2017-2022 Model Year Super Duty Vehicles Equipped with a Power Release Tailgate - Unintended Tailgate Opening. In the affected vehicles, some customers report experiencing an unintended tailgate opening and may have previously serviced their vehicle for this concern. Ford had developed an enhanced remedy for customers who may want this enhanced repair performed n their vehicle. |
| SSM 50636 | 2022-03-29. Service bulletin. 2011-2022 F-Super Duty and 2016-2023 F-650/F-750 vehicles equipped with a 6.7L engine may exhibit an elevated idle condition. During prolonged idle time, vehicles may experience this elevated idle to reduce unburned hydrocarbons from the SCR. The powertrain control module estimates hydrocarbon levels in the SCR and may increase idle speed to remove them. Idle speed will be increased to 1000 RPM for ambient temperatures near 26°C (80°F) and may increase to 1200 RPM at -40 °C (-40°F). Vehicles may exhibit exhaust smoke and diesel exhaust fluid smell during elevated idle condition. Exhaust smoke and smell condition will not affect reliability or durability of the engine. Power take-off (PTO) use and idle set point control will disable elevated speed. It is required that the operator monitor the vehicle and adhere to any Exhaust Filter warning messages. |
| SSM 50549 | 2022-03-08. Service bulletin. Some 2018-2020 F-150, 2017-2022 F-Super Duty and 2016-2022 F-650/F-750 vehicles equipped with a diesel engine may exhibit diagnostic trouble code (DTC) P0000 stored in the powertrain control module (PCM) after an on-demand self test. This DTC is due to a processing error in the PCM as a result of on-demand self testing. P0000 is an invalid DTC that will not illuminate the malfunction indicator lamp (MIL) and no repairs should be performed. |
| SIL 790 | 2021-04-06. Service bulletin. It has been discovered that some hydraulic lines installed by Altec may be in contact with chassis air brake line(s). Some DOT inspections have considered this to be a violation of federal regulation 49 CFR § 393.45 b 2. Over time, chafing of the air brake line(s) could result in loss of air pressure and reduction in braking performance. Altec requires the routing of the hydraulic lines to be inspected no later than the next periodic maintenance interval. The affected unit are some T40P cable placers installed on Ford F750 chassis from May 2015 to January 2020 |
| TSB 20-2267 | 2020-10-01. Service bulletin. Some 2015-2020 F-150 except Raptor, 2017-2020 F-Super Duty, 2018-2020 Expedition vehicles equipped with a front camera washer may exhibit a washer fluid leak at the front camera washer jet when not in use. This may be due to the rubber seal internal to the jet. To correct the condition, follow the Service Procedure to replace the washer jet. |
| SSM 47852 | 2019-04-03. Service bulletin. Some 2017-2019 F-Super Duty and 2016-2019 F-650/F-750 vehicles built on or after 1-Oct-2017 equipped with a 6.7L engine may exhibit an intermittent oil pressure warning lamp. A revised oil pressure switch has been released; service part number GC3Z-9278-B. For removal and installation of the oil pressure switch refer to Workshop Manual, Section 303-01C. Applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.