NHTSA recall 15V097000
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | NHTSA (United States) |
|---|---|
| Campaign number | 15V097000 |
| Manufacturer's number | 128 |
| Manufacturer | Hyundai Motor America |
| Reported | 2015-02-19 |
| Owners notified | 2015-04-14 |
| Component | EXTERIOR LIGHTING:TAIL LIGHTS; ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:GEAR POSITION INDICATION (PRNDL) |
| Units potentially affected | 24400 |
| Report | Quarterly report 6, for 2016 quarter 3 |
|---|---|
| Filed with NHTSA | 2016-10-17 |
| Vehicles in the campaign | 24400 |
| Reported remedied | 23599 (96%) |
| Reported unreachable | 596 |
| Reported removed | 2 |
These are the manufacturer's totals for the whole campaign at the end of 2016 quarter 3, as filed with NHTSA. They do not say whether one vehicle has been remedied: check the VIN with the official lookups. The reports are from data as of 2026-10-19.
What is wrong
Hyundai Motor America (Hyundai) is recalling certain model year 2015 Genesis vehicles manufactured February 21, 2014, to January 24, 2015. Water may leak into the rear combination lamp assemblies and cause an incorrect gear display on the instrument panel or a delay in the engagement of the selected gear when the vehicle is shifted from Park to Reverse or Drive.
What can happen
If the incorrect gear is being displayed, the vehicle may move in an unintended direction, increasing the risk of a crash.
The remedy
Hyundai will notify owners, and dealers will apply pads to prevent water intrusion into the combination lamp housing, free of charge. The recall began on April 14, 2015. Owners may contact Hyundai customer service at 1-855-671-3059. Hyundai's number for this recall is 128.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
| 2015 HYUNDAI GENESIS | Built 2014-02-21 to 2015-01-24. |
|---|
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| 19-AT-011H | 2019-07-01. Service bulletin. The procedure describes the procedure to check the ATF level for 8-speed Rear-Wheel-Drive vehicles. |
|---|---|
| 19-AT-008H | 2019-05-20. Service bulletin. When servicing a vehicle with a ?Check Engine light? and any of the DTCs listed below, follow the Service Procedure and replace the related solenoid and E-module. |
| 19-AT-007H | 2019-05-20. Service bulletin. This bulletin provides a procedure to transfer oil pressure data to the TCU using GDS Mobile. This procedure is necessary to reduce the TCU learning time and improve the shift quality. |
| 5NP-H3D9Z-03 | 2017-08-10. Service bulletin. The following vehicles are equipped with an 8-speed automatic transmission. The ATF level can be checked by the procedure shown below. |
| 5NP-D2Y6N-12 | 2017-01-26. Service bulletin. "UPDATE THE WARRANTY INFORMATION. DESCRIPTION: DO NOT REPLACE THE TRANSMISSION FOR THE DTC LISTED BELOW. INSTEAD, FOLLOW THE REPAIR PROCEDURE AND REPLACE THE E-MODULE." |
| 5NP-W7J6Y-11 | 2017-01-26. Service bulletin. "AUTOMATIC TRANSMISSION SOLENOID & SENSOR REPLACEMENT FOR DTC P0741, P0743, P0748, P0753, P0758, P075A, P0763, P0768, P0773, P2709 & P0841" |
| 5NP-J4N8R-01 | 2017-01-25. Service bulletin. DO NOT REPLACE THE TRANSMISSION FOR THE DTC LISTED. INSTEAD, FOLLOW THE REPAIR PROCEDURE AND REPLACE THE E-MODULE. |
| 5NP-Q9X6P-10 | 2016-10-14. Service bulletin. THIS BULLETIN PROVIDES A PROCEDURE TO TRANSFER PRESSURE DATA TO THE TCM USING GDS MOBILE. THIS PROCEDURE IS NECESSARY TO REDUCE THE TCM LEARNING TIME AND IMPROVE THE SHIFT QUALITY. |
| 5NP-B6E2P-10 | 2016-10-14. Service bulletin. "THE PCM OR TCM CONTAINS LOGIC TO ADJUST SOLENOID DUTY AND LINE PRESSURE AS NEEDED TO COMPENSATE FOR NORMAL CLUTCH WEAR OVER THE LIFE OF THE TRANSAXLE. THIS BULLETIN PROVIDES THE PROCEDURES NECESSARY TO RESET (ERASE) AND RELEARN THE PCM/TCM ADAPTIVE VALUES. AFTER THE FOLLOWING REPAIRS HAVE BEEN COMPLETED, THE PCM/TCM ADAPTIVE VALUES MUST BE RESET IN ORDER TO PROVIDE OPTIMUM SHIFT QUALITY. IF THE PROCEDURE IS NOT PERFORMED, THE TRANSMISSION MAY EXPERIENCE A SHIFT FLARE OR HARSH SHIFT. H REPLACE AUTOMATIC TRANSAXLE OR PCM/TCM H REPROGRAM OR EXCHANGE A PCM/TCM FROM ANOTHER VEHICLE" |
| 14-AT-007 | 2016-03-16. Service bulletin. SUMMARY TO BE PROVIDED ON A FUTURE DATE. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.