NHTSA recall 14V161000
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | NHTSA (United States) |
|---|---|
| Campaign number | 14V161000 |
| Manufacturer's number | P13 |
| Manufacturer | Chrysler Group LLC |
| Reported | 2014-04-01 |
| Owners notified | 2014-05-21 |
| Component | POWER TRAIN:AUTOMATIC TRANSMISSION |
| Units potentially affected | 125 |
| Report | Quarterly report 6, for 2015 quarter 3 |
|---|---|
| Filed with NHTSA | 2015-10-26 |
| Vehicles in the campaign | 125 |
| Reported remedied | 98 (78%) |
| Reported unreachable | 0 |
| Reported removed | 0 |
These are the manufacturer's totals for the whole campaign at the end of 2015 quarter 3, as filed with NHTSA. They do not say whether one vehicle has been remedied: check the VIN with the official lookups. The reports are from data as of 2026-10-19.
What is wrong
Chrysler Group LLC (Chrysler) is recalling certain model year 2014 Ram 1500 4x4 vehicles manufactured January 24, 2014, through February 5, 2014. In the affected vehicles, the transmission case may have been improperly machined which can result in the park pawl not properly engaging when the transmission is in the 'Park' position.
What can happen
If the park pawl does not properly engage, the vehicle may rollaway, increasing the risk of a crash and occupant or pedestrian injuries.
The remedy
Chrysler will notify owners, and dealers will inspect and replace the transmission, as necessary, free of charge. The recall began on May 21, 2014. Owners may contract Chrysler at 1-800-853-1403. Chrysler's number for this recall is P13.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
| 2014 RAM 1500 | Built 2014-01-24 to 2014-02-05. |
|---|
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| S2008000109 | 2023-01-09. Service bulletin. Flash Update Error When Flashing TCM Or PCM, Vehicles Equipped With An ITBM |
|---|---|
| S1709000010 | 2023-01-09. Service bulletin. Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear (roller failure) on one or more cam lobes and that camshaft/lifter replacement is necessary. |
| V51 | 2022-12-19. Service bulletin. Customer Satisfaction Notification V51 Reprogram Powertrain Control Module |
| S2008000109 | 2022-09-26. Service bulletin. Flash Update Error When Flashing TCM Or PCM, Vehicles Equipped With An ITBM |
| 21-016-14 | 2022-08-22. Service bulletin. Flash: Transmission Shift Enhancements This bulletin involves flash reprogramming of the Transmission Control Module (TCM) with new software. The customer may indicate that they may have experienced any of the following: ? 4x4 Low Mode shift quality during a medium to heavy throttle ? MIL Illumination for DTC P215C - OUTPUT SHAFT SPEED WHEEL SPEED CORRELATION In addition, calibration changes have been made in the following areas to improve: ? Powertrain braking while in Tow/Haul mode ? Downshift response from a medium to heavy pedal ? Drivability at high altitude ? Acceleration performance during cruise control operation This calibration release also corrects a condition where DTC U11C3 may have been displayed when DTC U11E3 should have been displayed resulting in a possible misdiagnosis. |
| 18-021-15 REV. E | 2022-07-25. Service bulletin. Flash: 3.0L Powertrain Diagnostic And System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. It also involves replacement of the Oxygen (O2) Sensor and cleaning or replacement of the Exhaust Gas Temperature (EGT) Sensor 1/2 if necessary depending on Diagnostic Trouble Codes (DTC) that may have set. A small number of customers may experience an intermittent engine shudder or vibration which may not set a Diagnostic Trouble Code (DTC). In addition other customers may experience a Malfunction Indicator Lamp (MIL) illumination upon which the technician may find one or more of the following DTCs have been set: ? P26AB-00 - Engine Coolant Bypass Valve Stuck. ? P24AF-00 - Particulate Matter Sensor Circuit Performance. ? P2196-00 - O2 Sensor 1/1 Stuck Rich. ? P1E0C-00 - Empty Fuel Tank. ? P2237-00 - O2 Sensor 1/1 Pump Cell Current Circuit Open. ? P1297-00 - EGR Slow Response - Decreasing Flow. ? P0420-00 - Catalyst Efficiency (Bank 1). ? P20C2-00 - Reductant Heater 3 Control Circuit Performance. ? P204F-00 - Reductant System Performance. ? P20E9-00 - Reductant Pressure Too High. ? P249C-00 - Excessive Time To Enter Closed Loop Reductant Injection Timing Control. ? P1288-00 - NOX Sensor 1/2 Zero Offset Too High. ? P2002-00 - Diesel Particulate Filter Efficiency Below Threshold. ? P2299-00 - Brake Pedal Position / Accelerator Pedal Position Incompatible. ? P241D-00 - SCR Inducement - Forced Engine Shutdown. ? P016A-00 - Excessive Time To Enter Closed Loop Air/Fuel Ratio Control. ? P2459-00 - Diesel Particulate Filter Regeneration Frequency. ? P0133-00 - O2 Sensor 1/1 Slow Response. ? P2084-00 - Exhaust Gas Temperature Sensor Circuit Performance - (1/2). ? P0171-00 - Fuel System 1/1 Lean. ? P0426-00 - Catalyst Temperature Sensor Circuit Performance (1/1). ? P0045-00 - Turbocharger Boost Control Circuit/Open. ? P0087-00 - Fuel Rail Pressure Too Low. ? P009A- |
| S2025000001 Rev. | 2020-12-28. Service bulletin. (Rev. B) Malfunction Indicator Lamp Illumination (MIL). Diagnostic Trouble Code (DTC) P203E ? Reductant Level Sensor 1 Circuit Intermittent-Erratic Set. |
| S2025000001 Rev. | 2020-12-21. Service bulletin. (Rev. B) Malfunction Indicator Lamp Illumination (MIL). Diagnostic Trouble Code (DTC) P203E ? Reductant Level Sensor 1 Circuit Intermittent-Erratic Set. |
| V51 | 2020-01-21. Service bulletin. Customer Satisfaction Notification V51 Reprogram Powertrain Control Module |
| 68211004A | 2018-11-26. Service bulletin. Shifter - Automatic Trans Before this part is replaced for any issue please call John Grzecki on cell (248) 379- 0969. If you do not receive a return call within 15 minutes, proceed with the repair. Please be sure to accurately record any DTCs identified with the scan tool and document them on the repair order. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.