NHTSA recall 13V610000
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | NHTSA (United States) |
|---|---|
| Campaign number | 13V610000 |
| Manufacturer's number | N65 |
| Manufacturer | Chrysler Group LLC |
| Reported | 2013-12-06 |
| Owners notified | 2014-03-31 |
| Component | POWER TRAIN:AUTOMATIC TRANSMISSION |
| Units potentially affected | 4194 |
| Report | Quarterly report 6, for 2015 quarter 3 |
|---|---|
| Filed with NHTSA | 2015-07-20 |
| Vehicles in the campaign | 4194 |
| Reported remedied | 3539 (84%) |
| Reported unreachable | 36 |
| Reported removed | 0 |
These are the manufacturer's totals for the whole campaign at the end of 2015 quarter 3, as filed with NHTSA. They do not say whether one vehicle has been remedied: check the VIN with the official lookups. The reports are from data as of 2026-10-19.
What is wrong
Chrysler Group LLC (Chrysler) is recalling certain model year 2013 Chrysler 300 AWD, Dodge Charger AWD, and Dodge Ram 1500 4x4 vehicles equipped with ZF all wheel drive ("AWD") 8HP45 transmissions. In the affected vehicles, the transmission output shaft may fracture.
What can happen
The transmission output shaft fracture could result in a loss of power, increasing the risk of a crash. Additionally, if the parking brake is not applied before exiting the vehicle, the vehicle may roll away despite the transmission being placed in 'Park'.
The remedy
Chrysler will notify owners, and dealers will inspect and replace the transmissions, as necessary, free of charge. The recall began on March 31, 2014. Customers may contact Chrysler at 1-800-853-1403. Chrysler's recall number is N65.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
| 2013 CHRYSLER 300 | Built 2012-11-24 to 2013-02-16. |
|---|---|
| 2013 DODGE CHARGER | Built 2012-11-24 to 2013-02-12. |
| 2013 RAM 1500 | Built 2013-01-12 to 2013-06-27. |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| S1709000010 | 2023-01-09. Service bulletin. Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear (roller failure) on one or more cam lobes and that camshaft/lifter replacement is necessary. |
|---|---|
| V51 | 2022-12-19. Service bulletin. Customer Satisfaction Notification V51 Reprogram Powertrain Control Module |
| R8149638A | 2022-09-15. Service bulletin. 8-speed transmission |
| 18-017-13 | 2022-07-18. Service bulletin. This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that the following Diagnostic Trouble Code has been set: P26AB-Engine Coolant Bypass Valve Stuck |
| 9004509 | 2022-05-31. Service bulletin. Oil Filter If a Mopar Oil Filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils. Recommended Brands: Wix, Purolator, and NapaGold |
| 18-017-13 | 2021-03-15. Service bulletin. This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that the following Diagnostic Trouble Code has been set: P26AB-Engine Coolant Bypass Valve Stuck |
| 18-073-20 | 2020-09-28. Service bulletin. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs):U1424-00 - Implausible Engine Torque Signal Received(2015 MY). P0456 - EVAP System Small Leak. P2610 - PCM Internal Engine Off Timer Performance. P2299 - Brake Pedal Position / Accelerator Pedal Position Incompatible. P0335 - Crankshaft Position Sensor Circuit(2014-2015 MY). U0140 - Lost Communication With Body Control Module(LC, LD and LX). P1621 - O2 Sensor Reference Voltage Circuit Low. P1622 - O2 Sensor Reference Voltage Circuit High. P0606 - Internal Control Processor. P0300 - Multiple Cylinder Misfire. P219A - Bank 1 Air-Fuel Ratio Imbalance. P219B - Bank 2 Air-Fuel Ratio Imbalance. P0307 - Cylinder 7 Misfire. P2096 - Downstream Fuel Trim System 1 Lean. P2097 - Downstream Fuel Trim System 1 Rich. The following software enhancements are also available(2015 MY):Reverse gear lock-out change from 16 kph (10 mph) to 4.8 kph (3 mph)(Sales Code EZC with DEC). Change to purge vapor control calibration(Sales Code EZH with DGJ). Improvements to vehicle overspeed control(Sales Code EZH with DGJ). Calibration update to the electronic voltage regulator voltage set point(Sales Code EZH with DGJ). Additional Symptoms:Customers with a Pursuit Dodge Charger (LD) may describe an unpleasant odor in the vehicle under certain extreme ambient conditions2013-2015 MY LD with (Sales Codes EZH with AHB or AHV only). Technicians may find that the original vehicle Frequency Operated Button Integrated Key (FOBIK) does not function properly following replacement of the Wireless Ignition Node (WIN/WCM). The Secret Key information stored in the PCM may be corrupt. This update will restore the PCM?s ability to store/transfer valid Secret Key information |
| V51 | 2020-01-21. Service bulletin. Customer Satisfaction Notification V51 Reprogram Powertrain Control Module |
| 18-074-15 | 2018-12-17. Service bulletin. Flash: 6.4L Powertrain Diagnostic And System Enhancements This bulletin involves reprogramming the Powertrain Control Module with the latest available software. The technician may find the following Diagnostic Trouble Code (DTC) set in the Powertrain Control Module (PCM) memory: ? U0140 - Lost Communication With Body Control Module NOTE: Attempting to clear this DTC will be unsuccessful. |
| 68211004A | 2018-11-26. Service bulletin. Shifter - Automatic Trans Before this part is replaced for any issue please call John Grzecki on cell (248) 379- 0969. If you do not receive a return call within 15 minutes, proceed with the repair. Please be sure to accurately record any DTCs identified with the scan tool and document them on the repair order. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.