NHTSA recall 11V131000
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | NHTSA (United States) |
|---|---|
| Campaign number | 11V131000 |
| Manufacturer | BRAUN CORPORATION |
| Reported | 2011-02-24 |
| Owners notified | 2011-03-17 |
| Component | EQUIPMENT:APPLIANCE:AIR CONDITIONER |
| Units potentially affected | 185 |
What is wrong
BRAUN IS RECALLING CERTAIN MODEL YEAR 2005 THROUGH 2011 PARATRANSIT VANS BUILT ON FORD E-350 CHASSIS FROM APRIL 27, 2005, THROUGH JULY 29, 2010, EQUIPPED WITH CARRIER GENV EM-1 EVAPORATOR UNITS (EM-1) MANUFACTURED FROM JANUARY 1, 2006 THROUGH DECEMBER 2010, CONTAINING A DELPHI PACK-CON III FUSE HOLDER IN AN ALLIED MOTION MOTOR ASSEMBLY; EM-1 UNIT PART NUMBERS 77-62112-XX AND 77-62512-XX, STARTING WITH SERIAL NUMBER KNT90890232 TO SERIAL NUMBER NNE91230058. DUE TO TIME, TEMPERATURE, AND/OR VIBRATION, THE FUSE MAY LOOSEN IN THE FUSE HOLDER RESULTING IN HIGH RESISTANCE AND ARCING.
What can happen
IF SUFFICIENT ARCING OCCURS, THE FUSE HOLDER MAY MELT, AND MAY BE ACCOMPANIED BY FLAME, SMOKE AND POTENTIAL FIRE.
The remedy
BRAUN WILL NOTIFY OWNERS AND INSTRUCT THEM TO CONTACT EITHER CARRIER OR A BRAUN DEALER TO OBTAIN THE FREE REMEDY. THE SAFETY RECALL BEGAN ON MARCH 17, 2011. OWNERS MAY CONTACT CARRIER AT 1-800-793-4741 OR BRAUN AT 1-800-THE-LIFT (1-800-843-5438).
Notes
OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO <A HREF=HTTP://WWW.SAFERCAR.GOV>HTTP://WWW.SAFERCAR.GOV</A> .
| 2005 FORD E-350 | Built 2005-04-27 to 2010-07-29. |
|---|---|
| 2006 FORD E-350 | Built 2005-04-27 to 2010-07-29. |
| 2007 FORD E-350 | Built 2005-04-27 to 2010-07-29. |
| 2008 FORD E-350 | Built 2005-04-27 to 2010-07-29. |
| 2009 FORD E-350 | Built 2005-04-27 to 2010-07-29. |
| 2010 FORD E-350 | Built 2005-04-27 to 2010-07-29. |
| 2011 FORD E-350 | Built 2005-04-27 to 2010-07-29. |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| SSM 52476 | 2024-05-03. Service bulletin. All accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated (wired) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System (DPES); dealership management can authorize users. The authorized user must go to FMCDealer.com > Parts and Service > Parts Product Line Information > Keys/Entry Devices > Aftermarket Keyless Entry Keypad Code Access. Follow the instructions on the screen to obtain the master code for the accessory keypad. |
|---|---|
| SSM 47009 | 2018-05-29. Service bulletin. The Accessory (Wireless) Keyless Entry Keypad can only be used with vehicles that are factory built with Remote Keyless Entry (RKE). The master code for the Accessory (Wireless) Keyless Entry Keypad can be retrieved from FMCDealer - Parts and Service - Parts Product Line Information - Keys/Entry Devices - Aftermarket Keyless Entry Keypad Code Access. Access to this site is granted through Dealer Program Enrollment System (DPES) and Dealer Principal, General Manager or Parts and Service Director can authorize users. Once authorized the retrieval process for master code can be obtained. The master code for the Accessory Keyless Entry Keypad cannot be retrieved from the body control module(BCM) with a diagnostic tool. |
| SSM 47201 | 2018-05-21. Service bulletin. Replacing the original equipment SYNC/Navigation system with either an aftermarket SYNC/Navigation kit or modifying original SYNC/Navigation parts to provide additional features is not recommended nor supported on any Ford, Mercury or Lincoln vehicle. Only approved Genuine Ford accessories or originally installed systems are supported and certified to function correctly with other vehicle systems. If you suspect a system has been modified, the following resources can be used to verify original equipment: Monroney Label (Window Sticker), Professional Technician Society (PTS) OASIS tab select SYNC or HVBOM. For Genuine Ford accessories use: PTS Workshop Tab select Dealer Installed Accessory or Accessory Installation. |
| FSA-12229 | 2012-03-02. Service bulletin. ROUSH INDUSTRIES: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. SOME TRUCKS LABELS ARE INSTALLED WITH INCORRECT INFORMATION PERTAINING TO EMISSION CONTROL MANDATE OF CALIFORNIA AIR RESOURCES BOARD (CARB) EMISSION REGULATIONS. *PE |
| ER-12229 | 2012-03-02. Service bulletin. ROUSH INDUSTRIES: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. ON CERTAIN MODEL TRUCKS, IT HAS BEEN DETERMINED THAT THE LABEL FOR VEHICLE EMISSION CONTROL, HAS BEEN INCORRECTLY INSTALLED WITH INFORMATION MANDATED BY THE EPA. *PE |
| ER-2011-001P | 2011-09-13. Service bulletin. ROUSH INDUSTRIES SERVICE CAMPAIGN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. THE EMISSION CONTROL LABELS DO NOT MEET STANDARDS. *RM |
| 0703 | 2007-09-25. Service bulletin. CERTAIN 2007 E-SERIES STRIP CHASSIS VEHICLE EMISSION CONTROL INFORMATION (VECI) LABEL REPLACEMENT. *NJ |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.