NHTSA recall 10V153000
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | NHTSA (United States) |
|---|---|
| Campaign number | 10V153000 |
| Manufacturer | COMM-TRANS |
| Reported | 2010-04-15 |
| Owners notified | 2010-07-06 |
| Component | EQUIPMENT ADAPTIVE/MOBILITY |
| Units potentially affected | 65 |
What is wrong
COMM-TRANS IS RECALLING CERTAIN MODEL YEAR 2007-2009 ADA CONVERSION VANS BUILT ON FORD E-150, E-250, AND E-350 CHASSIS BETWEEN DECEMBER 7, 2007 AND DECEMBER 23, 2009 AND FITTED WITH CERTAIN RICON S SERIES AND K SERIES L-MODEL WHEELCHAIR LIFTS. DUE TO A PROBLEM IN THE SOFTWARE THAT CONTROLS THE LIFT'S "UP" FUNCTION, SHOULD THE "UP" BUTTON BE RELEASED BEFORE THE FLOOR LEVEL LIMIT SWITCH IS ACTIVATED, THE LIFT MAY CONTINUE ITS UPWARD TRAVEL AND MAY OVERRUN THE FLOOR LEVEL CUT OFF POINT.
What can happen
WHEN THE PLATFORM OVERRUNS THE VEHICLE FLOOR LEVEL AND STOPS AT AN ANGLE FROM 15-20 DEGREES, IT IS POSSIBLE FOR A PERSON IN A WHEELCHAIR TO TIP OVER AND FOR SOMEONE STANDING ON THE PLATFORM TO FALL, POSSIBLY RESULTING IN INJURIES.
The remedy
COMM-TRANS WILL NOTIFY OWNERS AND THE REPAIRS WILL BE PERFORMED BY AUTHORIZED RICON DEALERS FREE OF CHARGE. A SOFTWARE SOLUTION FOR THIS SAFETY DEFECT IS UNDER INVESTIGATION. UNTIL THE SOFTWARE SOLUTION IS AVAILABLE, RICON WILL PROVIDE OWNERS WITH A BULLETIN OUTLINING PROPER WHEELCHAIR LIFT OPERATION AND WILL SHIP OWNERS A DVD-BASED TRAINING AID TO PROMOTE PROPER LIFT OPERATION AT NO COST. THE SAFETY RECALL BEGAN ON JULY 6, 2010. OWNERS MAY CONTACT RICON AT 1-818-267-3000 OR COMM-TRANS AT 1-901-726-9394.
Notes
THIS RECALL ONLY PERTAINS TO VEHICLES ALTERED BY COMM-TRANS AND HAS NO RELATION TO ANY VEHICLES MANUFACTURED BY FORD MOTOR COMPANY.OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO <A HREF=HTTP://WWW.SAFERCAR.GOV>HTTP://WWW.SAFERCAR.GOV</A> .
| 2007 FORD E-150 | Built 2007-12-07 to 2009-12-23. |
|---|---|
| 2008 FORD E-150 | Built 2007-12-07 to 2009-12-23. |
| 2009 FORD E-150 | Built 2007-12-07 to 2009-12-23. |
| 2007 FORD E-250 | Built 2007-12-07 to 2009-12-23. |
| 2008 FORD E-250 | Built 2007-12-07 to 2009-12-23. |
| 2009 FORD E-250 | Built 2007-12-07 to 2009-12-23. |
| 2007 FORD E-350 | Built 2007-12-07 to 2009-12-23. |
| 2008 FORD E-350 | Built 2007-12-07 to 2009-12-23. |
| 2009 FORD E-350 | Built 2007-12-07 to 2009-12-23. |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| SSM 52476 | 2024-05-03. Service bulletin. All accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated (wired) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System (DPES); dealership management can authorize users. The authorized user must go to FMCDealer.com > Parts and Service > Parts Product Line Information > Keys/Entry Devices > Aftermarket Keyless Entry Keypad Code Access. Follow the instructions on the screen to obtain the master code for the accessory keypad. |
|---|---|
| SSM 47009 | 2018-05-29. Service bulletin. The Accessory (Wireless) Keyless Entry Keypad can only be used with vehicles that are factory built with Remote Keyless Entry (RKE). The master code for the Accessory (Wireless) Keyless Entry Keypad can be retrieved from FMCDealer - Parts and Service - Parts Product Line Information - Keys/Entry Devices - Aftermarket Keyless Entry Keypad Code Access. Access to this site is granted through Dealer Program Enrollment System (DPES) and Dealer Principal, General Manager or Parts and Service Director can authorize users. Once authorized the retrieval process for master code can be obtained. The master code for the Accessory Keyless Entry Keypad cannot be retrieved from the body control module(BCM) with a diagnostic tool. |
| SSM 47201 | 2018-05-21. Service bulletin. Replacing the original equipment SYNC/Navigation system with either an aftermarket SYNC/Navigation kit or modifying original SYNC/Navigation parts to provide additional features is not recommended nor supported on any Ford, Mercury or Lincoln vehicle. Only approved Genuine Ford accessories or originally installed systems are supported and certified to function correctly with other vehicle systems. If you suspect a system has been modified, the following resources can be used to verify original equipment: Monroney Label (Window Sticker), Professional Technician Society (PTS) OASIS tab select SYNC or HVBOM. For Genuine Ford accessories use: PTS Workshop Tab select Dealer Installed Accessory or Accessory Installation. |
| ER-11-2011 | 2012-03-02. Service bulletin. ROUSH INDUSTRIES: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. ON SOME TRUCKS, ROUSH DETERMINED AN INCORRECTLY INSTALLED LABEL WAS PLACED FOR VEHICLE EMISSION CONTROL MANDATED BY EPA. *PE |
| ER-2011-001P | 2011-09-13. Service bulletin. ROUSH INDUSTRIES SERVICE CAMPAIGN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. THE EMISSION CONTROL LABELS DO NOT MEET STANDARDS. *RM |
| 0703 | 2007-09-25. Service bulletin. CERTAIN 2007 E-SERIES STRIP CHASSIS VEHICLE EMISSION CONTROL INFORMATION (VECI) LABEL REPLACEMENT. *NJ |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.