Service bulletins for the 2020 Western Star 4900
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
156 on file from NHTSA, as of 2026-10-19.
By type
By component
Only bulletins with component: Engine are shown. Show all
| 21TS-04 | 2021-03-02. Service bulletin. ENGINE AND ENGINE COOLING. Technical Service Letter for Gen 5 DD15 Instrument Panel Oil Pressure Gauge Operation. Gen 5 DD15 equipped units have been brought in for service with a complaint of the instrument panel oil pressure gauge not moving during unit operation and/or stuck at 50PSI. The instrument panel oil pressure gauge does not operate the same as with previous engine models. Please be advised, this is normal operation and no further diagnostics are required. Do not down a unit for this complaint. |
|---|---|
| 21OEM-06 | 2021-03-01. Service bulletin. ENGINE AND ENGINE COOLING. Starting on November 23, 2020, DiagnosticLink 8.13 (Build 4527) was made available. Current subscribers of DiagnosticLink 8.11 or 8.12 may upgrade to DiagnosticLink 8.13 at no cost. All DTNA Service shops & OEM locations are required to maintain the latest version of software on each of their stations. |
| 20TS-07REV | 2021-03-01. Service bulletin. ENGINE AND ENGINE COOLING. Revised Technical Service Letter for Cold Weather Faults on GHG17/21 DD13 with MCM Software Version 14. Due to colder weather, there may be an increase in the frequency of faults, noted below, on GHG17/21 DD13 trucks built after June 5th 2019. This is due to a calibration issue in the current MCM software (14.1.1.5 or 14.2.1.3). New software is scheduled for release in the first quarter of 2021 that will address these faults. |
| WI21-006 | 2021-02-26. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING; EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT. Warranty Information Letter for Detroit NOx Sensor Circuit Fault Codes - Claim Guidelines. |
| 18SP744 | 2020-12-08. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; ENGINE AND ENGINE COOLING; FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM:FUEL RAIL. Special Publication letter for Two-Filter Fuel System KM59 GEN1 DD15 DD16 Severe Duty High Pressure Fuel Rail Feed Lines Service Kit. |
| 20TS-09 | 2020-12-07. Service bulletin. ENGINE AND ENGINE COOLING. Technical Service Letter for SPN 3711 FMI 31 on GHG17 DD15 Trucks. |
| 20TS-07 | 2020-10-21. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ENGINE AND ENGINE COOLING. Technical Service Letter for Cold Weather Faults on GHG17/21 DD13 with MCM Software Version 14. Due to colder weather, there may be an increase in the frequency of faults, noted below, on GHG17/21 DD13 trucks built after June 5th 2019. This is due to a calibration issue in the current MCM software (14.1.1.5 or 14.2.1.3). New software is scheduled for release in the first quarter of 2021 that will address these faults. |
| 20TS-06 | 2020-10-13. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; ENGINE AND ENGINE COOLING. DDC Technical Service Letter for GHG17 DD Platform Heavy Duty Oil Pan Drain Plug Inserts. Some GHG17 DD Platform Heavy Duty oil pans may experience an issue with the oil pan drain plug insert spinning during removal or installation while completing an oil change. Leaking may also be observed at the drain plug and/or other plugs in the oil pan. |
| 18SP736 | 2020-10-01. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:BELTS AND ASSOCIATED PULLEYS; ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN. Detroit Diesel Special Publication informing about Heavy Duty Friction Style Belt Tensioner Kit. This heavy duty friction style belt tensioner kit contains the belt tensioner and two M10 bolts to correctly pin the friction style belt tensioner. The M10x80mm bolt is used to pin the engine cooling fan drive arm. The M10x50mm bolt is used to pin the engine accessory drive arm. |
| 20TS-03REV2 | 2020-10-01. Service bulletin. ENGINE AND ENGINE COOLING. Revised Technical Service Letter for DD Heavy Duty Platform Belt Tensioner Change. A newly designed, dual-arm friction shoe damping tensioner was implemented for the DD Heavy Duty Platform. The revision includes additional information on retrofit and service kits. |
| TechTalk7679 | 2020-10-01. Service bulletin. ENGINE AND ENGINE COOLING. Tech Talk discussion on repair verification for codes like 'low air flow' when a trailer is not available. |
| 20CSA-15 | 2020-09-02. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING; EQUIPMENT. Customer Service Announcement for Release of DiagnosticLink 8.12 Service Pack 2. On Thursday, September 3, 2020, Service Pack (SP) 2 for DiagnosticLink 8.12 Standard and Professional will be made available to download from the Detroit Diesel server. |
| 20TS-05 | 2020-07-31. Service bulletin. ENGINE AND ENGINE COOLING. Technical Service Letter for EPA10, GHG14, GHG17 Diesel Particulate Filter (DPF) Compatibility. Note: This document supersedes 14 TS-25 and 15 TS-8. Detroit Diesel has determined that some, Diesel Particulate Filters (DPFs) are compatible in pairs and or can be mixed together within EPA10 and GHG14 Systems. For 1-BOX and Two-Box Configuration Aftertreatment Systems (ATS), this is only possible when the filters are used in accordance with Tables 1 and 2 shown below. All other DPFs, NOT mentioned below, are NOT compatible. |
| 20OEM-05 | 2020-07-31. Service bulletin. ENGINE AND ENGINE COOLING. OEM and distributor announcement for DiagnosticLink 8.12 (Build 4527) was made available. All DTNA Service shops & OEM locations are required to maintain the latest version of software on each of their stations. |
| 20CSA-10 | 2020-07-31. Service bulletin. ENGINE AND ENGINE COOLING. Customer Service Announcement informing that Service Pack (SP) 1 for DiagnosticLinkî 8.12 Standard and Professional is available to download from the Detroit Diesel server. |
| TS1033014 | 2020-07-31. Service bulletin. EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP; ENGINE AND ENGINE COOLING. Training Solutions for Fuel Leak Found at High Pressure Fuel Pump Weep Hole for Heavy Duty DD Engines. Occasionally we see trucks come in with fuel leaking from the high pressure fuel pump weep hole. This is NOT a defect in the pump and further diagnostics need to be performed to find the root cause. |
| 20CSA-09 | 2020-07-28. Service bulletin. ENGINE AND ENGINE COOLING. Customer Service Announcement for DiagnosticLink Software Update Reminder. Due to various software changes and fixes, vehicles will require DiagnosticLink 8.12 to perform functional programming. Failure to use this version may cause errors, incomplete programming, and poor vehicle performance. Because of this, all DiagnosticLink 8.09 installed versions will be disabled as of Thursday, July 23, 2020. |
| 20OEM-04 | 2020-06-26. Service bulletin. ENGINE AND ENGINE COOLING. OEM and distributor announcement for Running Change to ACM Software for MY2020. There is an upcoming running change (RC1) for ACM software that will be installed when OEMs or distributors program with DiagnosticLink. The hardware part number for the ACM module will remain the same (A 000 446 97 54). OEMs are instructed to continue ordering the same ACM hardware part number. |
| 20CSA-08 | 2020-06-26. Service bulletin. ENGINE AND ENGINE COOLING. Customer Service Announcement for Release of DiagnosticLink 8.12. On Wednesday, June 10, 2020, DiagnosticLink 8.12 will be made available for download from the ordering system. Current subscribers of DiagnosticLink 8.xx can upgrade to DiagnosticLink 8.12 at no cost. All DTNA service shops are required to maintain the latest version of software on each of their stations. |
| 20TS-03REV | 2020-06-26. Service bulletin. ENGINE AND ENGINE COOLING. Revised Technical Service Letter for DD Heavy Duty Platform Belt Tensioner Change. A newly designed, dual-arm friction shoe damping tensioner was implemented for the DD Heavy Duty Platform. |
| D20M3 | 2020-06-26. Service bulletin. ENGINE AND ENGINE COOLING. Detroit Field Service campaign for DETROIT Export DD15 and DD13 Valve Lash Adjustment, Throttle Connector O-ring, and TC Air Line Spacer Installation. |
| WI20-009 | 2020-06-13. Service bulletin. ENGINE AND ENGINE COOLING. Warranty Information Letter for a Warranty Service Replacement Engine Program Clarification. Detroit established the Warranty Service Replacement Engine Program to support an unrepairable catastrophic engine failure due to manufacturing defect. To improve understanding and utilization of the program, DTNA is clarifying eligibility and engine returns. |
| WI20-004 | 2020-04-23. Service bulletin. EQUIPMENT; ENGINE AND ENGINE COOLING. Warranty Information Letter for Warranty Long Block Program Change. The Detroit Reman Long Block Program has expanded. The expansion reduces complexity in ordering reman engines and promotes stocking reman engines to meet uptime commitments. |
| SS1034681 | 2020-03-24. Service bulletin. ENGINE AND ENGINE COOLING:COOLING SYSTEM:RADIATOR ASSEMBLY. Service Solution for Lower Radiator Pipe Rubbing on X15 Cummins engine. Due to limited clearance, the lower radiator pipe may rub on the engine block and lower radiator hose may rub on the front engine support causing radiator coolant leakage on Cummins X15 installations. |
| 20CSA-04 | 2020-03-22. Service bulletin. ENGINE AND ENGINE COOLING; EQUIPMENT. Customer Service Announcement saying that Service Pack (SP) 3 for DiagnosticLink® 8.11 Standard and Professional will be available for download from the Detroit Diesel server. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.