Recalls that may apply to the 2019 Western Star 4700
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
By component
| 21V896000 | 2021-11-17. TIRES. Daimler Trucks North America, LLC (DTNA) is recalling certain 2012-2021 Freightliner SD 108, Freightliner SD 114, 2016-2020 Freightliner Coronado, 2013 Western Star 6900, 2013-2022 Western Star 4700, Western Star 4900, and 2022 49X vehicles. The tires and rims are not approved and rated for these vehicles from the Tire and Rim Association or tire manufacturer. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 120, "Wheels and Rims-Other Than Passenger Cars." |
|---|---|
| 21V882000 | 2021-11-12. ELECTRICAL SYSTEM:WIRING. Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Western Star 4700, 4900, 5700, and 6900 trucks. The affected trucks have a power stud that passes through the bulkhead. In certain circumstances, the power stud may contact the bulkhead and result in an electrical arc. |
| 21V326000 | 2021-05-07. FUEL SYSTEM, DIESEL:FUEL INJECTION SYSTEM:FUEL RAIL. Daimler Trucks North America, LLC (DTNA) is recalling certain 2018-2021 Freightliner Custom Chass XC Chassis, 108SD, Custom Chass XB Chassis, Business Class M2, 114SD, and Western Star 4700 vehicles. The sealing washer may not seat correctly in the pilot bore holes, allowing the high pressure fuel rail assembly to leak. |
| 21V206000 | 2021-03-24. ELECTRICAL SYSTEM:WIRING. Daimler Trucks North America, LLC (DTNA) is recalling certain 2019-2021 Western Star 4700 and Western Star 5700 vehicles. The ground harness wiring may be undersized and may cause a connector to melt. |
| 20V642000 | 2020-10-16. POWER TRAIN:CLUTCH ASSEMBLY. Daimler Trucks North America LLC (DTNA) is recalling certain 2018-2019 Freightliner Cascadia, Business Class M2, 108SD, 114SD and 122SD and Western Star 4700, 4900 and 5700 vehicles. An internal component within the clutch assembly may fail, which in certain circumstances could allow the vehicle to move unexpectedly. |
| 20V281000 | 2020-05-18. ELECTRICAL SYSTEM:WIRING. Daimler Trucks North America LLC (DTNA) is recalling certain 2019-2021 Western Star 4700 and 5700 vehicles. A particular wire in the ground harness may be undersized, possibly resulting in a melted connector in the ground circuit harness. If the connector becomes damaged, under certain circumstances, the engine may stall without the ability to restart. |
| 20V127000 | 2020-03-03. SERVICE BRAKES, AIR:DISC:CALIPER. Daimler Trucks North America LLC (DTNA) is recalling certain 2019-2020 Freightliner 108SD, 114SD, Cascadia, Business Class M2, Western Star 4700 and 5700, Freightliner Custom Chassis S2, Custom Chassis XB, and Custom Chassis XC vehicles equipped with air disc brakes. The brake caliper mounting bolts may have been insufficiently tightened. Built 2018-09-04 to 2019-03-29. |
| 19V171000 | 2019-03-05. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. Daimler Trucks North America LLC (DTNA) is recalling certain 2019 Western Star 4700 and 4900 trucks. The vehicles are accumulating distance in kilometers, but the odometer display is labeled as being miles. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 101, "Control and Displays." Built 2018-11-07 to 2018-11-26. |
| 18V913000 | 2018-12-19. SUSPENSION:FRONT:CONTROL ARM; STEERING:LINKAGES:TIE ROD ASSEMBLY; STEERING. Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Freightliner 114SD, 122SD, 108SD, Cascadia and Business class M2 trucks, Freightliner Custom Chassis XBS, XCL, XCM, MT45, MT55, S2G, S2RV, XCR and XCS custom chassis and Western Star 4700, 4900 and 5700 trucks equipped with Detroit Axle axles. The affected vehicles may have loose steering and tie rod arm bolts. Built 2017-02-10 to 2019-07-21. |
| 18V903000 | 2018-12-19. POWER TRAIN:CLUTCH ASSEMBLY. Daimler Trucks North America LLC (DTNA) is recalling certain 2018-2019 Freightliner 108SD, 114SD, 122SD, Cascadia, Business Class M2, Western Star 4700, 4900, and 5700 vehicles, equipped with certain Eaton ECA heavy-duty truck clutches. An internal component in the clutch assembly may fail, possibly resulting in unintended vehicle movement. Built 2017-04-10 to 2018-07-02. |
| 18V703000 | 2018-10-05. SERVICE BRAKES, AIR:DISC:CALIPER. Daimler Trucks North America, LLC (DTNA) is recalling certain 2018-2019 Freightliner 108SD, 114SD, Cascadia, Business Class M2, Freightliner Custom Chassis Corporation S2C 106 Cab, S2G Cab Chassis, XCL, XCM, XBS, XCP, XCR, Western Star 4700, 4900 and 5700 trucks. The brake caliper mounting bolts may have been insufficiently tightened. Built 2017-11-01 to 2018-10-16. |
| 18V641000 | 2018-09-19. TIRES:SIDEWALL. Daimler Trucks North America, LLC (DTNA) is recalling certain 2019 Freightliner 108SD, 114SD, 122SD and Business Class M2 trucks and Western Star 4700 and 4900 trucks, equipped with certain Bridgestone M854 tires with date codes 2418-2518, Bridgestone M860A tires with date code 2518, and Bridgestone M864 tires with date codes 2318-2418, all of size 425/65R22.5. The sidewall steel body cords may be exposed, which can cause unexpected, rapid air loss during use. Built 2018-06-14 to 2018-08-28. |
| 18V353000 | 2018-05-29. SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:CALIPER. Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Freightliner M2 Business Class, 108SD, 114SD and Cascadia trucks, Western Star 4700, 4900, and 5700 trucks, FCCC S2C 106 Cab, S2G Cab, XBR, XBS, XCL, XCM, XCP, XCR, and XCS chassis equipped with air disc brakes. The brake caliper mounting bolts on these vehicles may be insufficiently tightened, allowing the bolts to loosen. Built 2017-01-03 to 2017-10-31. |
| 18V191000 | 2018-03-26. ELECTRICAL SYSTEM:WIRING. Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Western Star 4700, 4900, 5700, and 6900 trucks. The affected trucks have a power stud that passes through the bulkhead. In certain circumstances the power stud may contact the bulkhead and result in an electrical arc. Built 2016-10-18 to 2018-02-06. |
| 2022715 | 2022-12-12. Tires. Issue: Certain trucks were built with tires that are not approved for use with the truck's wheels. As a result, the tires may not perform properly, or a tire could fail. Safety Risk: A tire failure could cause a loss of control and increase the risk of a crash. Corrective Actions: Daimler Truck North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to replace the affected tires. |
|---|---|
| 2021706 | 2021-11-17. Tires. Issue: Certain trucks were built with tires that are not approved for use with the truck's wheels. As a result, the tires may not perform properly, or a tire could fail. Safety Risk: A tire failure could cause a loss of control and increase the risk of a crash. Corrective Actions: Daimler Trucks North America (DTNA) will notify owners by mail. The corrective actions for this recall are under development. You will be instructed to bring your truck to a DTNA authorized service facility when a repair is available. |
| 2021697 | 2021-11-12. Electrical. Issue: On certain trucks, the pass-through power stud (an electrical connection located on the bulkhead) may come into contact with the bulkhead. If this happens, there could be electrical arcing (sparks). Note: This recall replaces FL-766 (Transport Canada Recall 2018-190). If your truck was inspected as a part of that recall, but the pass-through power stud was not replaced, your truck requires this repair. Safety Risk: Electrical arcing could create the risk of a fire. Corrective Actions: Daimler Trucks North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to replace the pass-through power stud. |
| 2021271 | 2021-05-07. Fuel System. Issue: On certain vehicles, the fuel rail assembly could develop a leak. Note: This recall only affects vehicles equipped with a Cummins L9 or ISX12 diesel engine. Safety Risk: A fuel leak can create the risk of a fire. Corrective Actions: Cummins will notify owners by mail and instruct you to take your vehicle to a Cummins authorized service center to inspect the fuel rail. If damage is found, the fuel rail and fuel lines will be replaced. If no damage is found, the fuel rail will be reassembled with new crush washers using a special tool. |
| 2021172 | 2021-03-24. Electrical. Issue: On certain trucks, an undersized wire in the ground circuit harness could overheat and melt a connector. If this happens, the engine may stall and you may not be able to restart it. Safety Risk: A loss of engine power could increase the risk of a crash. Corrective Actions: Daimler Trucks North America (DTNA) will notify owners by mail and instruct you to take your truck to an authorized DTNA Service Facility to replace the ground wire harness. |
| 2020551 | 2020-11-12. Structure. Issue: On certain trucks, the welds that attach the trailer hitch may crack due to improper welding. As a result, the hitch could detach from the truck while towing a trailer. Note: This recall only affects certain trucks with trailer hitches installed by Commercial Truck Equipment. Safety Risk: A trailer that detaches from a truck could create a risk of a crash. Corrective Actions: Commercial Truck Equipment will notify owners by mail and instruct you to take your truck to a dealer to inspect the trailer hitch and repair or replace it, as necessary. You should stop using the trailer hitch until the inspection and repair have been completed. |
| 2020488 | 2020-10-16. Powertrain. Issue: On certain trucks equipped with an Eaton automated manual transmission and electronic clutch actuator (ECA), a component within the clutch assembly could fail. If this happens, the broken clutch components could prevent the transmission from disengaging or shifting to neutral. This could result in unintended vehicle movement, even if the parking brake is applied. Note: This recall replaces FL-803 (Transport Canada recall 2018-714). Trucks that were repaired under that recall also require this repair. Safety Risk: Sudden and unexpected movement of the vehicle could create a risk of injury or a crash. Corrective Actions: Daimler Trucks North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to replace the clutch and update the transmission software. |
| 2020217 | 2020-05-18. Electrical. Issue: On certain trucks, an undersized wire in the ground circuit harness could overheat and melt a connector. If this happens, the engine may stall and you may not be able to restart it. Safety Risk: A loss of engine power could increase the risk of a crash. Corrective Actions: Daimler Trucks North America (DTNA) will notify owners by mail and instruct you to take your truck to an authorized DTNA Service Facility to replace the ground wire harness. |
| 2020086 | 2020-03-03. Brakes. Issue: On certain trucks equipped with air disc brakes, the brake caliper mounting bolts may not be properly tightened. This could cause the caliper bolts to loosen and result in reduced brake effectiveness. Safety Risk: Reduced brake effectiveness could cause an increase in stopping distance and create the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct them to take their truck to an authorized Daimler Trucks of North America Service Facility to inspect and replace the brake caliper bolts as necessary. |
| 2019336 | 2019-07-04. Lights And Instruments. Issue: On certain trucks equipped with electronic stability control (ESC), the brake lights may turn on when the automatic traction control (ATC) activates. Canadian regulations do not allow brake lights to turn on when the automatic traction control activates. Safety Risk: Brake lights that turn on when a vehicle is not slowing could confuse other drivers. Corrective Actions: The company will notify owners by mail and instruct them to take their truck to a Daimler Trucks North America authorized service facility. The truck will either be reprogrammed or retrofitted so the brake lights do not turn on when the automatic traction control (ATC) activates. |
| 2019196 | 2019-04-23. Lights And Instruments. Issue: On certain trucks, the odometer display shows the actual distance travelled in kilometers, but the label on the dial face indicates miles. This labelling error could lead to driver confusion about vehicle speed or distance travelled. Safety Risk: While the safety risks may be low, Canadian regulations require this problem to be corrected. Corrective Actions: The company will notify owners by mail and instruct them to take their vehicle to a Daimler Trucks North America authorized service facility to inspect the odometer. The speedometer/odometer will be replaced as required. |
| 2018719 | 2018-12-20. Steering. On certain vehicles, the bolts that join the steering and tie rod arm to the steering knuckle may not have been properly tightened. This could lead to a separation of the tie rod arm and cause a loss of steering control. This could create a risk of a crash causing injury and/or property damage. Correction: Daimler Trucks North America Authorized Service Facilities will inspect the steering and tie rod arm bolts to ensure they are torqued correctly and install new fasteners as necessary. |
| 2018714 | 2018-12-19. Powertrain. This recall was replaced by Transport Canada Recall No. 2020-488. On certain vehicles equipped with an Eaton automated manual transmission and electronic clutch actuator (ECA), an internal component within the clutch assembly may have been manufactured improperly and could fail. If this occurs, the broken clutch components could prevent the transmission from disengaging or shifting to neutral. This could result in unintended vehicle movement, even if the parking brake is applied, increasing the risk of a crash causing injury and/or damage to property. Correction: Daimler Trucks of North America Authorized Service Facilities will recalibrate the Transmission Control Module (TCM) and replace components as necessary. |
| 2018550 | 2018-10-09. Brakes. On certain vehicles equipped with air disc brakes, the brake caliper mounting bolts may be incorrectly torqued. This could result in the caliper bolts loosening, which could lead to the caliper detaching. Insufficiently torqued fasteners may not provide adequate clamping force between the brake caliper and brake anchor plate potentially resulting in reduced brake effectiveness, which would result in increased stopping distances, increasing the risk of a crash causing injury and/or damage to property. Correction: Daimler Trucks of North America Service Facilities will inspect the bolts, and repair as necessary. |
A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.