Service bulletins for the 2008 Volkswagen Touareg
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
418 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
| V871622 2019947 | 2018-01-08. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER. Update to model year applicability. |
|---|---|
| V691601 2010479 | 2018-01-08. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Update model year applicability to include 2017. |
| V871620 2005566 | 2018-01-08. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Update model and model year applicability. |
| PDI - TOUAREG TE | 2017-12-14. Service bulletin. EQUIPMENT; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. "Touareg Perfect Delivery Inspection (PDI) - Technician and Detailer Inspections: A checklist to insure a customer receives a wonderful delivery of a vehicle that looks, feels, and meets the expectations of a new vehicle that he/she has purchased" |
| TT 21-13-01 | 2017-12-14. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER. Tech Tips (Equipped with Turbocharged Engine Turbocharger Replacement Tip): If mechanical damage is found to the turbocharger (e.g. damaged compression wheel, loose or broken shaft), it is not enough to just replace the turbocharger. This document informs the procedure of checks for damage. |
| V201305 2031426 | 2017-12-14. Service bulletin. FUEL SYSTEM, GASOLINE. Technical Bulletin (High Pressure Fuel Pump Diagnosis): Completing the GFF high pressure pump function test is essential to diagnose proper pump operation and to avoid unnecessary replacements. This document informs how to perform the diagnostic. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue. The fault codes for checking warranty coverage for servicing the vehicle are also available. |
| V921302 2024878 | 2017-12-14. Service bulletin. VISIBILITY:WINDSHIELD WIPER/WASHER. Technical Bulletin (Wiper Blade Inspection for Proper Warranty Coding): Wiper blade inspection guidelines for wear and tear, outside influence or a factory issue. This document informs what is under coverage for wiper blade issues. |
| PDI - TOUAREG TE | 2017-12-14. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. TOUAREG Perfect Delivery Inspection (PDI) - Technician and Detailer Inspections: A checklist to insure a customer receives a wonderful delivery of a vehicle that looks, feels, and meets the expectations of a new vehicle that he/she has purchased |
| TT 55-13-01 | 2017-12-14. Service bulletin. LATCHES/LOCKS/LINKAGES:TRUNK LID:LOCK; ELECTRICAL SYSTEM:WIRING: REAR COMPARTMENT/TRUNK. Tech Tips (Rear Lid Does Not Open After Handle Replacement): If the rear lid handle is replaced with part number 1J0 827 566L, the microswitch from the original handle must be transferred to the new handle. If original microswitch is not available, microswitch part number 1J5 962 104 B should be ordered and installed. |
| V171302 2017813 | 2017-12-14. Service bulletin. ENGINE AND ENGINE COOLING. Technical Bulletin (Oil Consumption Measurement): Customer states oil consumption is higher than the Volkswagen oil consumption standard of up to 0.5 quarts per 600 miles, or 0.5 liters per 1000 km. In order to provide effective lubrication and cooling of internal engine components, all internal combustion engines consume a certain amount of engine oil. Oil consumption varies from engine to engine and may change significantly over the life of the engine. Typically, engines with specified break-in periods consume more oil during the break-in period, and the oil consumption will stabilize after the break-in period. This document informs of oil consumption tests to check a vehicles performance. |
| TT 200901 | 2017-12-14. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Update to existing tip for fuel quality checking. |
| TT 00-13-02 | 2017-12-14. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Tech Tips (Technician Helpline Vehicle Check Sheets): When it becomes necessary to open a VW Technician Helpline VTA case while performing diagnosis for a diesel particulate filter, manual transmission repair, or turbocharger concern, it is recommended to complete the related worksheet/check sheet before calling. This document informs where Worksheets/Check Sheets are available on ServiceNet. |
| TT 90-11-10 | 2017-12-14. Service bulletin. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. Tech Tips (Instrument Cluster Production Mode): During PDI, or after installation of a replacement cluster, ?Pro? may be displayed in place of the odometer. The high beam indicator may be flashing in the instrument cluster as well. This indicates the cluster is in Production mode. Production mode is not the same as ?Transport? mode. This document infroms of the difference between Production, and Transport mode. |
| TT 57-10-11 | 2017-12-05. Service bulletin. ELECTRICAL SYSTEM. Tech Tips (Comfort Module (J393) or BCM (J519) Replacement): This document informs If a comfort or body control module is replaced during normal diagnosis, make sure the factory mode has been switched OFF. This can be accomplished by selecting the test plan through GFF or through Vehicle Self Diagnosis in adaptation channel 99. Failure to deactivate factory mode will create a concern where the door locks will not lock and/or unlock with the switch and/or the remotes. |
| V171403 2017813 | 2017-12-05. Service bulletin. ENGINE. Technical Bulletin (Oil Consumption Measurement): Customer states oil consumption is higher than the Volkswagen oil consumption standard of up to 0.5 quarts per 600 miles, or 0.5 liters per 1000 km. In order to provide effective lubrication and cooling of internal engine components, all internal combustion engines consume a certain amount of engine oil. Oil consumption varies from engine to engine and may change significantly over the life of the engine. Typically, engines with specified break-in periods consume more oil during the break-in period, and the oil consumption will stabilize after the break-in period. Refer to the Owners Manual for specific break-in procedures. Under normal conditions, the rate of oil consumption depends on the quality and viscosity of the oil, the RPM at which the engine is operated, the ambient temperature and road conditions. Further factors include the amount of oil dilution from water condensation or fuel residue and the oxidation level of the oil. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue. The fault codes for checking warranty coverage for servicing the vehicle are also available. |
| TT 24-13-03 | 2017-12-05. Service bulletin. ELECTRICAL SYSTEM. Tech Tips (Engine Control Module Fault P130A ?Hide Cylinder?): This document informs that DTC P130A ?Hide Cylinder? indicates that excessive misfiring has occurred. As a result, the ECM has turned off a fuel injector to prevent catalyst damage. To address this fault, diagnose and repair all misfire concerns that are present. Repairing the other faults will resolve the P130A. |
| Reference - Refl | 2017-12-05. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. Quick Reference Update Guide: This document informs of the corresponding software/hardware and disc availability to the customer concerns about a vehicle |
| V001404 2010380 | 2017-12-05. Service bulletin. EQUIPMENT. Technical Bulletin (Squeaks, Rattles, Noise, Repair Materials): This doucment contains a list of components and applications developed to repair concerns of squeaks, rattles, noise and trim fit conditions. |
| V871402 2005566 | 2017-12-05. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER. Technical Bulletin (HVAC, Unpleasant Odor): Condensation, which is a normal condition in all A/C systems, can cause a musty odor. If the odor is noticeable in the vehicle when the engine is not turned on, the cause may be mold and mildew in the passenger compartment, and not be related to the A/C system. All other possible sources of the odor must be investigated before this document can be performed. This document contains the procedure for the VW method to remove musty odors |
| V011407 2014603 | 2017-12-05. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. Technical Bulletin This Technical Bulletin details the general process for carrying out a Software Version Management (SVM) software update for any Technical Bulletin (TSB) / Required Vehicle Update (RVU). |
| V011408 2014815 | 2017-12-05. Service bulletin. ENGINE. Technical Bulletin The use of contaminated gasoline, seasonal fuel changes (summer/winter fuel) or gasoline with a low content of deposit control additives may result in one or more of the following conditions: -Excessive accumulation of deposits on intake valves, intake manifold, fuel injectors and combustion chambers. -Engine runs rough after cold start. -Excessive engine cranking time. -Stumbles while driving. -Rough engine idle. -Loss of engine performance. -Poor fuel economy. This document informs of the procedure for the vehicle if it is diagnoised with poor quality gas |
| V871401 2005566 | 2017-12-05. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER. Technical Bulletin (HVAC, Unpleasant Odor): Unpleasant odor is coming from Heating and Ventilation system. Odor mainly occurs after vehicle has been sitting (unused) at least 5 hours and within 20 to 60 seconds after vehicle is first started. Condensation is a normal characteristic in all A/C systems. If odor is noticeable continue to follow this document. Contaminants are effectively neutralized using the AIRCOMATIC? II Ultrasonic Climate System Cleaner (VAS 6189A) or AIRCOMATIC? III Ultrasonic Climate System Cleaner (VAS 6189B) and AIRCO-CLEAN? Ultrasonic HVAC Treatment (30208). All other cleaning methods are no longer permitted. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue. The fault codes for checking warranty coverage for servicing the vehicle are also available. |
| V941402 2011521 | 2017-12-05. Service bulletin. EXTERIOR LIGHTING:HEADLIGHTS. Technical Bulletin (Exterior Lights, Moisture Accumulation): Exterior light assemblies (headlights, taillights, fog lights, turn signals) are vented and may collect moisture on their inner surfaces, depending on humidity and other climatic changes. This document discusses necessary to diagnosis, and potential remedy of the issue. |
| TT 90-11-10 | 2017-11-08. Service bulletin. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. Tech Tips (Instrument Cluster Production Mode): This document informs the procedure to remove the production mode setting when it is displayed in the instrument cluster. |
| V201503 2031426 | 2017-11-08. Service bulletin. ELECTRICAL SYSTEM; ENGINE; FUEL SYSTEM, GASOLINE. Technical Bulletin: High Pressure Fuel Pump Diagnosis. Completing the GFF high pressure pump function test is essential to diagnose proper pump operation and to avoid unnecessary replacements. This document contains the procedure to update the programming on the diagnostic hardware. This document contains the fault codes necessary to check the warranty coverage for servicing this issue. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.