WenmarOpen by Wenmar Pro

Service bulletins for the 2008 Volkswagen R32

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

241 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Bulletins, newest first
9414032023-07-24. Service bulletin. EXTERIOR LIGHTING. Exterior Lights, Moisture Accumulation
9414022023-07-24. Service bulletin. EXTERIOR LIGHTING. Exterior Lights, Moisture Accumulation
9414012023-07-24. Service bulletin. EXTERIOR LIGHTING. Exterior Lights, Moisture Accumulation
9213022023-07-24. Service bulletin. VISIBILITY/WIPER. Wiper Blade Inspection for Proper Warranty Coding
9212042023-07-24. Service bulletin. VISIBILITY/WIPER. Wiper Blade Inspection for Proper Warranty Coding
8714092023-07-24. Service bulletin. VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM. Air Conditioning, Cleaning of the Refrigerant Circuit (U.S.Only)
8714022023-07-24. Service bulletin. VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM. HVAC, Unpleasant Odor
8714012023-07-24. Service bulletin. VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM. HVAC, Unpleasant Odor
8713012023-07-24. Service bulletin. VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM. HVAC, Unpleasant Odor
TT5713022023-07-17. Service bulletin. ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:IMMOBILIZER/PROXIMITY:KEY/SENDER. If key blade is found to stick or bind when opening or closing, check position of roll pin that secures key blade to mechanism. If roll pin is sticking out on either side (as shown below), do not replace key. Instead, use appropriate sized punch and hammer to drive in the roll pin so that it is flush with edge of mechanism.
Warranty2023-07-17. Service bulletin. EQUIPMENT. Volkswagen Warranty Policies and Procedures ? April 2014
VWS13032023-07-17. Service bulletin. ENGINE; EQUIPMENT. In SAGA, the time units for the Volkswagen DoubleCheck labor operation were reduced in error from 50 time units to 30 time units during the system update posted on July 4th.
TT5014012023-07-10. Service bulletin. WHEELS; TIRES. The use of tire dressing gives your tires that shiny finish that completes the image of a clean (new) vehicle. There are many different tire dressing products available. When choosing a product please pay close attention to its contents. Always use a water based product.
TT201301a2023-07-10. Service bulletin. UNKNOWN OR OTHER; ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM); FUEL SYSTEM, OTHER. To clear static ECM fault P1250 ?Fuel Level Too Low?, add fuel to vehicle and complete a road test of at least 10 miles. Simply adding fuel without completing a road test may not allow fault to clear.
TT2013012023-07-10. Service bulletin. FUEL SYSTEM, OTHER; ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM); UNKNOWN OR OTHER. To clear static ECM fault P1250 ?Fuel Level Too Low?, add fuel to vehicle and complete a road test of at least 10 miles. Simply adding fuel without completing a road test may not allow fault to clear.
TT131301a2023-07-10. Service bulletin. POWER TRAIN; ENGINE AND ENGINE COOLING. When servicing the timing chain sprocket or removing the vibration damper, be aware that one bolt holds both the vibration damper (harmonic balancer) and the crankshaft timing chain sprocket to the crankshaft. Once the damper is removed, the crankshaft should not be rotated unless special tool spacer T10368 has been installed. The crankshaft timing chain sprocket and spur gear drive on the crankshaft have a coupling that must be seated correctly during assembly. Failure to install special tool spacer T10368 before rotating engine will cause the engine to skip time and bend valves.
TT1313012023-07-10. Service bulletin. ENGINE AND ENGINE COOLING; POWER TRAIN. CBFA 2.0T TSI Engine
TT0014032023-07-10. Service bulletin. EQUIPMENT; EQUIPMENT:ELECTRICAL:INFOTAINMENT:BLUETOOTH/WIFI; ELECTRICAL SYSTEM. When performing SVM updates, the scan tool should be hardwired to the vehicle and the Bluetooth physically turned off. A hard wired internet connection is also recommended.
TT001304A2023-07-10. Service bulletin. EQUIPMENT. If a needed service part is on back order, upgrade the daily order to a red order and check the ?Car Down? box to escalate the order. If parts assistance is needed, please call 800-767-6552 to speak with a VWGoA Parts Specialist.
TT0013042023-07-10. Service bulletin. EQUIPMENT. If a needed service part is on back order, upgrade the daily order to a red order and check the ?Car Down? box to escalate the order. If parts assistance is needed, please call 800-767-6552 to speak with a VWGoA Parts Specialist.
TT3214012023-07-05. Service bulletin. POWER TRAIN. Incorrect torque converter or flywheel/flexplate installation can result in transmission damage. When installing an engine, flywheel or transmission, please follow the installation procedures outlined in ELSA. For the flywheel/flexplate, please be certain the correct shim is installed between it and the crankshaft (reference VWIQ120). When installing a torque converter, press the torque converter hub through the seal as far as the first stop. Turn the torque converter while pushing toward the transmission using light force, until the cut outs in the torque converter hub lock into the pump wheel plate. The torque converter slides in. The torque converter is installed correctly if it is easy to turn by hand and if it fits evenly in the transmission bell housing. Additionally, it should spin freely when the transmission bell housing bolts are torqued to the engine block, prior to installation of the flywheel to converter bolts (reference VWIQ121).
TT24071032023-07-05. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM). When diagnosing fault code P2279-Leaking Air in Intake System, be sure to check the cam timing first.
TT2110012023-07-05. Service bulletin. ENGINE. When diagnosis on the above engine leads to the testing of the N75, please refer to the picture below. The diagram shows which vacuum ports on the N75 valve should hold vacuum and which ones should not.
TT9714022023-06-13. Service bulletin. ELECTRICAL SYSTEM. The DLC is intended for use with diagnostic scan tools and by emissions testing stations. However, aftermarket devices (i.e., drive data recorders) that connect to the DLC have now become available.
TT9614022023-06-13. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. When replacing the complete vehicle lock set (all vehicle keys and lock cylinders) for any reason, be aware that the ?Adapt keys? test plan will not allow the new keys to adapt to the vehicle. Instead, perform the test plan for ?New identity?. During this test plan, make the appropriate selection to indicate only the lock set has been replaced, as shown below in figures 1 and 2.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.