WenmarOpen by Wenmar Pro

Service bulletins for the 2011 Volkswagen Passat

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

583 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Bulletins, newest first
TT 0115042017-12-14. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. Seach tips to assist in finding DTC information
TT 0115052017-12-14. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Tip to perform GFF feedback for test plan issues.
TT 45-09-032017-12-05. Service bulletin. STEERING. Tech Tips (Electro - Steering issues): If, after replacement of the steering rack, fault code 01309 008 is set in the ABS/ESP module only, follow the test plan in GFF for Driver Steering Recommendation (DSR) or channel 3 activation. If the test plan fails to clear the fault, follow the directions in this document
TT 57-10-112017-12-05. Service bulletin. ELECTRICAL SYSTEM. Tech Tips (Comfort Module (J393) or BCM (J519) Replacement): This document informs If a comfort or body control module is replaced during normal diagnosis, make sure the factory mode has been switched OFF. This can be accomplished by selecting the test plan through GFF or through Vehicle Self Diagnosis in adaptation channel 99. Failure to deactivate factory mode will create a concern where the door locks will not lock and/or unlock with the switch and/or the remotes.
561 065 760 A as2017-12-05. Service bulletin. ELECTRICAL SYSTEM. Assembly Instructions: Installation of original remote start feature accessory, Volkswagen Passat.
TT 24-13-032017-12-05. Service bulletin. ELECTRICAL SYSTEM. Tech Tips (Engine Control Module Fault P130A ?Hide Cylinder?): This document informs that DTC P130A ?Hide Cylinder? indicates that excessive misfiring has occurred. As a result, the ECM has turned off a fuel injector to prevent catalyst damage. To address this fault, diagnose and repair all misfire concerns that are present. Repairing the other faults will resolve the P130A.
TT 92-14-022017-12-05. Service bulletin. VISIBILITY:REAR WINDOW WIPER/WASHER. Tech Tips (Washer Level Sensor issues): This document discusses approved windshield washer fluids and the damages non - approved fluids can cause. The document also informs on the procedure to Validate the washer reservoir is full with the proper washer solvent
TT 97-14-012017-12-05. Service bulletin. VISIBILITY:REAR WINDOW WIPER/WASHER. Washer Level Sensor issues: The indicator lamp in the I.P. for washer fluid remains illuminated and the washer reservoir is full. This documet explains thelocation of the procedure to Validate that the washer reservoir is full with the proper washer solvent
V401402 20283532017-12-05. Service bulletin. SUSPENSION. Technical Bulletin (Front Suspension Creaking Noise): Front suspension creaking noise during suspension cycles (going over speed bumps or entering on an inclined surface). The product solution for this issue was that Improved parts were installed in production since CW 51/13, VIN: A3_EC0600001. This document provides the procedure to diagnose the issue
V921402 20373222017-12-05. Service bulletin. EQUIPMENT. Technical Bulletin (Washer Level Sensor): The issue is caused by the outside influence of non-approved formulated washer fluids. Non-approved washer fluids leave a clear film coating on the sensor probes, insulating the probes so they cannot read the fluid level. This This document informs Validate the washer reservoir is full with the proper washer solvent. Refer to Elsa for proper fluid type and fluid quantities under repair manual, maintenance, fluid capacity table. Non-approved fluids can cause residues to form on the sensor which causes the washer fluid lamp to remain on when reservoir is full. The document also contains a photo of the sensor and an example of an approved cleanser
TT 91-11-092017-12-05. Service bulletin. EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM). Tech Tips (All Navigation Radios-All Models): When the Navigation RNS 850/510/315 is in 3D mode, the top portion of the screen may not display streets. This line represents the horizon and is a normal operation of system. This document provides Examples of day and night modes:
TT 91-14-022017-12-05. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. Tech Tips (MDI Functions with iPhone 5 Variants (5, 5c, 5s and iPad fourth generation, iPod Nano seventh generation)): The Apple iPhone 5, iPhone 5c, and iPhone 5s, as well as the iPad 4th generation and iPod Nano 7th generation use a proprietary ?Lightning? connector that is different than the 30-pin dock connector found on previous iPhone and iPad/iPod models. A new MDI cable (?MDI Adapter Cable ? Lightning Charger?) is now available through the VW Accessories eCatalog that is made for use with iPhone 5 variants as well as the previously mentioned iPad/iPod models. This cable should provide full functionality on any vehicle equipped with a UMI (Unified Multimedia Interface). On MY 13 and older vehicles equipped with an MDI, the software level of the MDI must be at or above SW 240 (see Technical Bulletin 2024337) in order to be fully functional.
TT 91-14-032017-12-05. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. Tech Tips (Vehicles equipped with Premium (RCD 510) Radios ? Coding Information for Replacing ?AC? Suffix Radios with ?AF? Suffix Replacement Unit): When replacing the radio on a 2010 ? 2011 vehicle equipped with a Premium 8 (RCD 510) radio with part number ending in the suffix ?AC? (1K0 035 180 AC), if the replacement part has a suffix ?AF?, make sure that online coding is performed. DO NOT PERFORM ANY SOFTWARE UPDATE OF THE ?AF? RADIO USING AN SD CARD OR ANY OTHER MEANS. No software updates are available for ?AF? suffix radios. Any attempt to update the software using an SD card or other means can result in permanent damage to the radio.
Reference - Refl2017-12-05. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. Quick Reference Update Guide: This document informs of the corresponding software/hardware and disc availability to the customer concerns about a vehicle
V001404 20103802017-12-05. Service bulletin. EQUIPMENT. Technical Bulletin (Squeaks, Rattles, Noise, Repair Materials): This doucment contains a list of components and applications developed to repair concerns of squeaks, rattles, noise and trim fit conditions.
V871402 20055662017-12-05. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER. Technical Bulletin (HVAC, Unpleasant Odor): Condensation, which is a normal condition in all A/C systems, can cause a musty odor. If the odor is noticeable in the vehicle when the engine is not turned on, the cause may be mold and mildew in the passenger compartment, and not be related to the A/C system. All other possible sources of the odor must be investigated before this document can be performed. This document contains the procedure for the VW method to remove musty odors
V011406 20340122017-12-05. Service bulletin. ENGINE. Technical Bulletin (Manifold Absolute Pressure Range / Performance Stored in ECM Fault Memory): Monitoring strategy for the manifold absolute pressure sensor is too sensitive, causing P0106 to incorrectly set in the engine control module. The product solution for this issue was improved software.
V011407 20146032017-12-05. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. Technical Bulletin This Technical Bulletin details the general process for carrying out a Software Version Management (SVM) software update for any Technical Bulletin (TSB) / Required Vehicle Update (RVU).
V011408 20148152017-12-05. Service bulletin. ENGINE. Technical Bulletin The use of contaminated gasoline, seasonal fuel changes (summer/winter fuel) or gasoline with a low content of deposit control additives may result in one or more of the following conditions: -Excessive accumulation of deposits on intake valves, intake manifold, fuel injectors and combustion chambers. -Engine runs rough after cold start. -Excessive engine cranking time. -Stumbles while driving. -Rough engine idle. -Loss of engine performance. -Poor fuel economy. This document informs of the procedure for the vehicle if it is diagnoised with poor quality gas
V151402 20321502017-12-05. Service bulletin. ENGINE. Technical Bulletin (Proper Removal of Engine Cover to Avoid Breakage): Pulling on the engine cover in some areas can cause damage. This document informs on the procedure to remove the engine cover.
V871401 20055662017-12-05. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER. Technical Bulletin (HVAC, Unpleasant Odor): Unpleasant odor is coming from Heating and Ventilation system. Odor mainly occurs after vehicle has been sitting (unused) at least 5 hours and within 20 to 60 seconds after vehicle is first started. Condensation is a normal characteristic in all A/C systems. If odor is noticeable continue to follow this document. Contaminants are effectively neutralized using the AIRCOMATIC? II Ultrasonic Climate System Cleaner (VAS 6189A) or AIRCOMATIC? III Ultrasonic Climate System Cleaner (VAS 6189B) and AIRCO-CLEAN? Ultrasonic HVAC Treatment (30208). All other cleaning methods are no longer permitted. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue. The fault codes for checking warranty coverage for servicing the vehicle are also available.
V941402 20115212017-12-05. Service bulletin. EXTERIOR LIGHTING:HEADLIGHTS. Technical Bulletin (Exterior Lights, Moisture Accumulation): Exterior light assemblies (headlights, taillights, fog lights, turn signals) are vented and may collect moisture on their inner surfaces, depending on humidity and other climatic changes. This document discusses necessary to diagnosis, and potential remedy of the issue.
V871618_20437042017-11-14. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Updated to include additional model year and required documentation instruction.
TT 90-11-102017-11-08. Service bulletin. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. Tech Tips (Instrument Cluster Production Mode): This document informs the procedure to remove the production mode setting when it is displayed in the instrument cluster.
V201503 20314262017-11-08. Service bulletin. ELECTRICAL SYSTEM; ENGINE; FUEL SYSTEM, GASOLINE. Technical Bulletin: High Pressure Fuel Pump Diagnosis. Completing the GFF high pressure pump function test is essential to diagnose proper pump operation and to avoid unnecessary replacements. This document contains the procedure to update the programming on the diagnostic hardware. This document contains the fault codes necessary to check the warranty coverage for servicing this issue.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.