WenmarOpen by Wenmar Pro

Service bulletins for the 2011 Volkswagen Passat

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

583 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Electrical system are shown. Show all

Bulletins, newest first
Control Module R2019-04-01. Service bulletin. ELECTRICAL SYSTEM. Quick Reference Update Guide: This document informs of the corresponding software/hardware and disc availability to the customer concerns about a vehicle
TT 0117052019-04-01. Service bulletin. ELECTRICAL SYSTEM; ENGINE. Coding information for replacement ECM to address specific fault setting after the install.
TT 90 19 012019-04-01. Service bulletin. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; EQUIPMENT. Instructions to address oil sensor warning.
TT 90 11 012019-04-01. Service bulletin. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. Instrument cluster production mode solution, updated to include additional model and model year applicability.
TT 91 18 182019-03-04. Service bulletin. ELECTRICAL SYSTEM:HORN; STEERING: STEERING WHEEL/HANDLE BAR; STEERING. Horn and ancillary steering wheel controls diagnosis.
analysis list 042019-01-07. Service bulletin. ENGINE AND ENGINE COOLING:COOLING SYSTEM; ELECTRICAL SYSTEM:IGNITION; STRUCTURE:BODY:DOOR. On-car analysis list of Customer Complaints: Transmission
TT 57 10 112018-12-10. Service bulletin. ELECTRICAL SYSTEM. Comfort/BCM Replacement direction, updated to include additional model year applicability.
TT 58 18 012018-12-10. Service bulletin. ELECTRICAL SYSTEM:12V/24V/48V BATTERY. Key Battery Diagnostic Process
V011812-20146032018-12-03. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. Update content and include additional models and model year applicability.
TT 57 18 022018-12-03. Service bulletin. ELECTRICAL SYSTEM:12V/24V/48V BATTERY; EQUIPMENT. Remote Ket battery diagnostics. Updated to change incorrect repair manual group number (from TT581801 to TT571802)
A971861 2013504-2018-09-17. Service bulletin. ELECTRICAL SYSTEM. This information bulletin contains instructions for checking the pins/terminals for contacts and nano contacts.
TT0017032018-04-16. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. Tip for Scan tool concerns that may occur duing a test plan
Quick Reference2018-04-02. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. Quick Reference of vehicle concerns. Includes a list of Software versions and the technical bulletin numbers that referred to the concerns Updated
TT571601 20443052018-03-13. Service bulletin. ELECTRICAL SYSTEM. Diagnostic reference chart to assist the technician in diagnosis of remote starter concerns, updated to reflect the module being addressed.
Ref. - Reflash U2018-02-05. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. Quick Reference Update Guide of the vehicles expected upgraded software level. The latest corresponding technical bulletins that address the issues, and concerns that have been had with the vehicles.
TT 0115072018-02-05. Service bulletin. ELECTRICAL SYSTEM. Alternative repair direction to address DTC P1386 on the 2.5l engine. Update to include Beetle and Beetle convertible applicability.
Update 021220162018-02-05. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. Quick Reference of vehicle concerns. Includes a list of Software versions and the technical bulletin numbers that referred to the concerns Updated
V191602 20225492018-01-08. Service bulletin. ELECTRICAL SYSTEM. Update model year applicability.
V011316 20340462017-12-14. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM:SOFTWARE. Technical Bulletin (Update Programming of ECM for Concerns of a Bump Sensation after Coming to a Stop): Current ECM programming may cause a bump after coming to a stop, which may be felt through the chassis of the vehicle. This concern is caused by the engine torque being slightly high when the transmission goes into Neutral Control. Neutral Control is designed to reduce load on the engine during idle, in order to decrease emissions. The production solution to this issue was improved software for smoother stopping.
V011317 20340122017-12-14. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM:SOFTWARE. Technical Bulletin (Manifold Absolute Pressure Range / Performance Stored in ECM Fault Memory): Monitoring strategy for the manifold absolute pressure sensor is too sensitive, causing fault code P0106 to incorrectly set in the engine control module. The production solution to this issue was improved software. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue. The fault codes for checking warranty coverage for servicing the vehicle are also available.
TT 90-11-102017-12-14. Service bulletin. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. Tech Tips (Instrument Cluster Production Mode): During PDI, or after installation of a replacement cluster, ?Pro? may be displayed in place of the odometer. The high beam indicator may be flashing in the instrument cluster as well. This indicates the cluster is in Production mode. Production mode is not the same as ?Transport? mode. This document infroms of the difference between Production, and Transport mode.
V911306 20227392017-12-14. Service bulletin. ELECTRICAL SYSTEM. Technical Bulletin (Bluetooth System Identification): This document informs how to identify the various Bluetooth systems by: ? Visual Identification ? PR Code ? Part Number
V911307 20243372017-12-14. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. Technical Bulletin (Factory Installed Media-In (MDI), Updated Programming for Various iPod Concerns): The update programming procedure in this document addresses the following concerns: ? Music skips at beginning of track. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue. The fault codes for checking warranty coverage for servicing the vehicle are also available.
TT 0115042017-12-14. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. Seach tips to assist in finding DTC information
TT 57-10-112017-12-05. Service bulletin. ELECTRICAL SYSTEM. Tech Tips (Comfort Module (J393) or BCM (J519) Replacement): This document informs If a comfort or body control module is replaced during normal diagnosis, make sure the factory mode has been switched OFF. This can be accomplished by selecting the test plan through GFF or through Vehicle Self Diagnosis in adaptation channel 99. Failure to deactivate factory mode will create a concern where the door locks will not lock and/or unlock with the switch and/or the remotes.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.