WenmarOpen by Wenmar Pro

Service bulletins for the 2008 Volkswagen Passat

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

642 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Electrical system are shown. Show all

Bulletins, newest first
New ODIS Service2018-12-10. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; ELECTRICAL SYSTEM:SOFTWARE; AIR BAGS. New ODIS Service Application
VW Diagnostic Co2018-12-10. Service bulletin. AIR BAGS; ELECTRICAL SYSTEM:SOFTWARE. As a result, in order to ensure proper diagnostic procedure completions and log submissions as required by Takata Airbag Recall 69Q9, all diagnostic devices in service must be updated to V2.36.5 prior to performing the recall procedures.
V011812-20146032018-12-03. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. Update content and include additional models and model year applicability.
A971861 2013504-2018-09-17. Service bulletin. ELECTRICAL SYSTEM. This information bulletin contains instructions for checking the pins/terminals for contacts and nano contacts.
TT0017032018-04-16. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. Tip for Scan tool concerns that may occur duing a test plan
Quick Reference2018-04-02. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. Quick Reference of vehicle concerns. Includes a list of Software versions and the technical bulletin numbers that referred to the concerns Updated
Ref. - Reflash U2018-02-05. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. Quick Reference Update Guide of the vehicles expected upgraded software level. The latest corresponding technical bulletins that address the issues, and concerns that have been had with the vehicles.
Update 021220162018-02-05. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. Quick Reference of vehicle concerns. Includes a list of Software versions and the technical bulletin numbers that referred to the concerns Updated
V191602 20225492018-01-08. Service bulletin. ELECTRICAL SYSTEM. Update model year applicability.
TT 90-11-102017-12-14. Service bulletin. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. Tech Tips (Instrument Cluster Production Mode): During PDI, or after installation of a replacement cluster, ?Pro? may be displayed in place of the odometer. The high beam indicator may be flashing in the instrument cluster as well. This indicates the cluster is in Production mode. Production mode is not the same as ?Transport? mode. This document infroms of the difference between Production, and Transport mode.
TT 57-10-112017-12-05. Service bulletin. ELECTRICAL SYSTEM. Tech Tips (Comfort Module (J393) or BCM (J519) Replacement): This document informs If a comfort or body control module is replaced during normal diagnosis, make sure the factory mode has been switched OFF. This can be accomplished by selecting the test plan through GFF or through Vehicle Self Diagnosis in adaptation channel 99. Failure to deactivate factory mode will create a concern where the door locks will not lock and/or unlock with the switch and/or the remotes.
561 065 760 A as2017-12-05. Service bulletin. ELECTRICAL SYSTEM. Assembly Instructions: Installation of original remote start feature accessory, Volkswagen Passat.
TT 24-13-032017-12-05. Service bulletin. ELECTRICAL SYSTEM. Tech Tips (Engine Control Module Fault P130A ?Hide Cylinder?): This document informs that DTC P130A ?Hide Cylinder? indicates that excessive misfiring has occurred. As a result, the ECM has turned off a fuel injector to prevent catalyst damage. To address this fault, diagnose and repair all misfire concerns that are present. Repairing the other faults will resolve the P130A.
Reference - Refl2017-12-05. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. Quick Reference Update Guide: This document informs of the corresponding software/hardware and disc availability to the customer concerns about a vehicle
V011407 20146032017-12-05. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. Technical Bulletin This Technical Bulletin details the general process for carrying out a Software Version Management (SVM) software update for any Technical Bulletin (TSB) / Required Vehicle Update (RVU).
TT 90-11-102017-11-08. Service bulletin. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. Tech Tips (Instrument Cluster Production Mode): This document informs the procedure to remove the production mode setting when it is displayed in the instrument cluster.
V201503 20314262017-11-08. Service bulletin. ELECTRICAL SYSTEM; ENGINE; FUEL SYSTEM, GASOLINE. Technical Bulletin: High Pressure Fuel Pump Diagnosis. Completing the GFF high pressure pump function test is essential to diagnose proper pump operation and to avoid unnecessary replacements. This document contains the procedure to update the programming on the diagnostic hardware. This document contains the fault codes necessary to check the warranty coverage for servicing this issue.
TT 64-14-022017-11-08. Service bulletin. VISIBILITY:POWER WINDOW DEVICES AND CONTROLS; VISIBILITY:GLASS, SIDE/REAR; ELECTRICAL SYSTEM. Tech Tips (Heated Rear Window, One or More Lines Inoperative): To detect which line(s) is inoperative, utilize a volt meter to check for 0 V, which will be present after the open in the grid line. The check must be performed with the engine running and heated rear window switched on. Switch OFF the ignition and visually locate the damage.
V201502 20314262017-11-08. Service bulletin. FUEL SYSTEM, GASOLINE; ELECTRICAL SYSTEM; ENGINE. Technical Bulletin (High Pressure Fuel Pump Diagnosis): Completing the GFF high pressure pump function test is essential to diagnose proper pump operation and to avoid unnecessary replacements
V241504 20381612017-11-08. Service bulletin. ELECTRICAL SYSTEM:WIRING:FUSES AND CIRCUIT BREAKERS. Technical Bulletin: This document has the fault codes to trouble shoot Intake Manifold Faults. It also contains the claim codes for warranty coverage
TT 00-14-032017-11-08. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. Tech Tips (SVM Update Instructions): This document informs when performing SVM updates, the scan tool should be hardwired to the vehicle and the Bluetooth physically turned off. A hard wired internet connection is also recommended.
TT 45-08-022017-11-08. Service bulletin. ELECTRICAL SYSTEM. Tech Tips (Fault Code 02543 000 Present in ABS): Fault code 02543 000 ?Brake Vacuum Sensor no Display? may be encountered in the ABS module. This may be caused by the hydraulic brake boost function (HBV) in adaptation value 61 being turned off (value = 0). All Passat Wagons (including 4motion) and 3.6L equipped sedans with front drive should have this function turned on (value = 1). Change the adaptation value and verify the fault has cleared. Additionally, it may be necessary to lock the vehicle and allow the modules to go to sleep to clear the fault.
TT 45-09-032017-11-08. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. Tech Tips (Electro ? Steering - DTC 01309 008 ?No Communication with -J500-? is Stored in the ABS/ESP Module Only): This document informs If, after replacement of the steering rack, fault code 01309 008 is set in the ABS/ESP module only, follow the test plan in GFF for Driver Steering Recommendation (DSR) or channel 3 activation. If the test plan fails to clear the fault, follow the directions in this document using Vehicle Self Diagnosis in Address Word 44 - Steering Assistance:
V011528 20338052017-11-08. Service bulletin. ELECTRICAL SYSTEM. Technical Bulletin (Engine, Misfire Diagnostic Aid): This document informs that Multiple components SHOULD NOT be replaced for 1 misfiring cylinder. Repeat repairs must be carefully addressed to identify the root cause of the concern. If misfires are determined to be related to a specific component(s) (fuel injector, spark plug, ignition coil), replace only one defective component at a time and re-evaluate the concern
V191401 20225492017-10-31. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING. Technical Bulletin (Electric Coolant Fans Continue to Run after Ignition is Switched OFF): This documentation informs it is considered normal operation for the electric coolant fans to continue to run for up to 15 minutes after the ignition is switched off in gasoline engine applications, and up to 16 minutes in diesel engine applications. The production solution to service this issue is that no production change is required.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.