Recalls that may apply to the 2022 Toyota Sienna
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
By component
| 25V877000 | 2025-12-17. EQUIPMENT ADAPTIVE/MOBILITY:WHEELCHAIR RESTRAINTS/SECUREMENT:LATCH/ANCHOR:. Vantage Mobility, LLC (VM) is recalling certain 2021-2026 Honda Odyssey, 2021-2025 Chrysler Pacifica, and Toyota Sienna vehicles equipped with QRT-Deluxe and QRT-Max wheelchair restraints. The retractors may not lock, preventing the wheelchair from being properly secured. |
|---|---|
| 25V086000 | 2025-02-13. SEATS:MID/REAR ASSEMBLY:RECLINER; SEATS:CRITICAL FASTENERS. Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2021-2025 Sienna Hybrid vehicles. The bolts for the seatbacks on the third-row seat assemblies may not be tightened properly. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) numbers 202, "Head Restraints," 207, "Seating Systems," and 225, "Child Restraint Anchorage Systems." |
| 22V239000 | 2022-04-13. ELECTRONIC STABILITY CONTROL (ESC):CONTROL MODULE:SOFTWARE. Toyota Engineering & Manufacturing (Toyota) is recalling certain 2022 Lexus LX 600, Lexus NX 350h, Lexus NX 450h+, Toytoa RAV4 Hybrid, 2021-2022 Lexus LS 500h, Toyota Mirai, RAV4 PRIME, Sienna, Venza, and 2020-2022 Toyota Highlander Hybrid vehicles. The Skid Control ECU software may not turn on the Vehicle Stability Control (VSC) system when the vehicle is restarted after the driver has disabled the VSC system. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 126, "Electronic Stability Control Systems." |
| 21V889000 | 2021-11-17. SEAT BELTS:REAR/OTHER:ANCHORAGE. Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022 Sienna vehicles equipped with seating for eight passengers. An incorrect seat belt webbing guide may have been installed on the outboard second-row seat belt assemblies. |
| 2026003 | 2026-01-05. Seats And Restraints. Issue: On certain vehicles converted for wheelchair access by Vantage Mobility, the wheelchair tie-down retractors may not have been manufactured properly. As a result, the retractor(s) may not lock automatically. If this happens, the wheelchair may not be secured correctly and could move in a crash. Note: This recall only affects certain Q'Straint QRT-DELUXE and QRT-MAX wheelchair retractors with the part number Q8-6200 or Q8-6209. Safety Risk: A wheelchair that moves in a crash could increase the risk of injury. Corrective Actions: To reduce the safety risk, Vantage Mobility recommends you confirm the wheelchair is secured properly by attempting to move it before driving until the recall repairs have been completed. Vantage Mobility will notify owners by mail and advise you to take your vehicle to a Vantage Mobility service center to inspect and, if necessary, replace the wheelchair retractor(s). |
|---|---|
| 2025070 | 2025-02-13. Seats And Restraints. Issue: On certain vehicles, the bolts that secure the third-row seats may not have been tightened properly. As a result, the seats could move in a crash. Safety Risk: A seat that moves in a crash could increase the risk of injury. Corrective Action: Toyota will notify owners by mail and advise you to take your vehicle to a dealership to tighten the bolts for the third-row seats. |
| 2022179 | 2022-04-13. Brakes. Issue: Under certain conditions, the vehicle stability control (VSC) system may not switch on when the ignition is restarted. This can happen if the driver manually turns off the VSC, depresses the brake pedal, and then turns off and restarts the vehicle while continuously depressing the brake pedal. Canadian regulations require the stability control system to be active each time that you start the vehicle. Safety Risk: A stability control system that is switched off could increase the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct you to take your vehicle to a dealer to update the skid control ECU software. |
| 2021703 | 2021-11-17. Seats And Restraints. Issue: On certain vehicles, the seat belts for the second-row outboard seats may have an incorrect D-ring. As a result, the seat belt could bunch up and tear in a crash. Safety Risk: A seat belt that breaks in a crash could create an increased risk of injury. Corrective Actions: Toyota will notify owners by mail and instruct you to take your vehicle to a dealer to replace the second-row outboard seat belt assemblies. |
A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.