WenmarOpen by Wenmar Pro

NHTSA recall 22V239000

A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.

Campaign
Published byNHTSA (United States)
Campaign number22V239000
Manufacturer's number22TA03, 22LA01
ManufacturerToyota Motor Engineering & Manufacturing
Reported2022-04-13
Owners notified2022-05-27
ComponentELECTRONIC STABILITY CONTROL (ESC):CONTROL MODULE:SOFTWARE
Units potentially affected458110
Part numbers44540-62031, 44540-62011, 44540-50231, 44510-78050, 44510-60230, 44510-48111, 44510-48090, 44510-42210, 44510-42191, 44510-08070
Remedy progress the manufacturer reported
ReportAnnual report 2, for 2025 quarter 2 to 2026 quarter 1
Filed with NHTSA2026-04-20
Vehicles in the campaign458110
Reported remedied444137 (96%)
Reported unreachable734
Reported removed3319

These are the manufacturer's totals for the whole campaign at the end of 2026 quarter 1, as filed with NHTSA. They do not say whether one vehicle has been remedied: check the VIN with the official lookups. The reports are from data as of 2026-10-19.

What is wrong

Toyota Engineering & Manufacturing (Toyota) is recalling certain 2022 Lexus LX 600, Lexus NX 350h, Lexus NX 450h+, Toytoa RAV4 Hybrid, 2021-2022 Lexus LS 500h, Toyota Mirai, RAV4 PRIME, Sienna, Venza, and 2020-2022 Toyota Highlander Hybrid vehicles. The Skid Control ECU software may not turn on the Vehicle Stability Control (VSC) system when the vehicle is restarted after the driver has disabled the VSC system. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 126, "Electronic Stability Control Systems."

What can happen

Driving with a deactivated stability control system increases the risk of a crash.

The remedy

Dealers will update the Skid Control ECU software, free of charge. Owner notification letters were mailed May 27, 2022. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is 22TA03. Lexus' number for this recall is 22LA01.

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

Vehicles this campaign lists
2021 LEXUS LS HYBRID
2022 LEXUS LS HYBRID
2022 LEXUS LX600
2022 LEXUS NX350H
2022 LEXUS NX450H+
2020 TOYOTA HIGHLANDER HYBRIDListed as a series or trim of this model.
2021 TOYOTA HIGHLANDER HYBRIDListed as a series or trim of this model.
2022 TOYOTA HIGHLANDER HYBRIDListed as a series or trim of this model.
2021 TOYOTA MIRAI
2022 TOYOTA MIRAI
2022 TOYOTA RAV4 HYBRIDListed as a series or trim of this model.
2021 TOYOTA RAV4 PRIMEListed as a series or trim of this model.
2022 TOYOTA RAV4 PRIMEListed as a series or trim of this model.
2021 TOYOTA SIENNA HYBRIDListed as a series or trim of this model.
2022 TOYOTA SIENNA HYBRIDListed as a series or trim of this model.
2021 TOYOTA VENZA HYBRIDListed as a series or trim of this model.
2022 TOYOTA VENZA HYBRIDListed as a series or trim of this model.
2021 TOYOTA redundant SIENNA
2022 TOYOTA redundant SIENNA
2021 TOYOTA redundant VENZA
2022 TOYOTA redundant VENZA

A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.

Bulletins for the same vehicles and component

Bulletins for the same vehicles and component
25TC032025-06-06. Service bulletin. TECHNICAL INSTRUCTIONS FOR 25TC03 REPROGRAMMING FOR FORWARD RECOGNITION CAMERA CERTAIN 2023 COROLLA CROSS 2023 COROLLA CROSS HV 2023 BZ4X
25TC032025-06-06. Service campaign. Frequently Asked Questions SPECIAL SERVICE CAMPAIGN 25TC03 Certain 2023 Model Year Corolla Cross Certain 2023 Model Year Corolla Cross HV Certain 2023 Model Year bZ4x Certain 2021-2023 Model Year Sienna HV TSS 3.0 Forward Recognition Camera Software Update
25TC032025-06-06. Service campaign. Included vehicles are equipped with Toyota Safety Sense (TSS) 3.0, which includes the Pre-Collision System (PCS), which uses the forward recognition camera. In rare cases, a software programming issue can damage the forward recognition camera. This will result in the Pre-Collision System not working the next time the car is started.
25TC032025-05-15. Service bulletin. TECHNICAL INSTRUCTIONS FOR 25TC03 REPROGRAMMING FOR FORWARD RECOGNITION CAMERA CERTAIN 2023 COROLLA CROSS 2023 COROLLA CROSS HV 2023 BZ4X
25TC032025-05-15. Service campaign. Frequently Asked Questions SPECIAL SERVICE CAMPAIGN 25TC03 Certain 2023 Model Year Corolla Cross Certain 2023 Model Year Corolla Cross HV Certain 2023 Model Year bZ4x Certain 2021-2023 Model Year Sienna HV TSS 3.0 Forward Recognition Camera Software Update
25TC032025-05-15. Service campaign. Included vehicles are equipped with Toyota Safety Sense (TSS) 3.0, which includes the Pre-Collision System (PCS), which uses the forward recognition camera. In rare cases, a software programming issue can damage the forward recognition camera. This will result in the Pre-Collision System not working the next time the car is started.
T-SB-0057-242024-07-23. Over-the-air update. Some 2022 model year Mirai vehicles are equipped with Toyota Teammate Advanced Drive. This system provides driving support through automated steering, acceleration, and braking under specific operating conditions within controlled access highways. Toyota Teammate Advanced Drive utilizes an array of sensors and cameras, high definitions maps, and the vehicle navigation system to provide hands-free (SAE level: 2) driving assistance for engaged drivers. Updates to enhance Toyota Teammate Advanced Drive operation or to add features/functions are delivered to the vehicle directly through the Toyota Teammate multimedia head unit (earlier than version 5.00). The updates include the following: •Updates the Advanced Drive messages and displays. •Reduces the frequency of prompts to hold the steering wheel in certain circumstances (e.g., facial recognition impact reduced when wearing a medical mask). •Increases scenarios where lane change assist can be used. •Adjusts the speed to help avoid blind spots of other vehicles in adjacent lanes. •Enhances peripheral recognition using LiDARs. •Reduces lane change assist activation when standard construction cones or barrels are detected. •Alerts driver to nearby vehicles at certain highway entrance merging areas during low-speed driving. •Alerts driver when approaching a much slower vehicle ahead. •Increases the maximum Advanced Drive set speed to 85 mph. The release notes text below will be displayed to the customer: “Updates the Advanced Drive messages and displays, reduces the frequency of prompts to hold the steering wheel in certain circumstances (e.g., facial recognition impact reduced when wearing a medical mask), increases scenarios where lane change assist can be used, adjusts the speed to help avoid blind spots of other vehicles in adjacent lanes, enhances peripheral recognition using LiDARs, reduces lane change assist activation when standard construction cones or barrels are detected, alerts driver to nearby vehicles at certain highway entrance merging areas during low-speed driving, alerts driver when approaching a much slower vehicle ahead, increases the maximum Advanced Drive set speed to 85 mph.”
T-SB-0057-242024-07-23. Over-the-air update. Some 2022 model year Mirai vehicles are equipped with Toyota Teammate Advanced Drive. This system provides driving support through automated steering, acceleration, and braking under specific operating conditions within controlled access highways. Toyota Teammate Advanced Drive utilizes an array of sensors and cameras, high definitions maps, and the vehicle navigation system to provide hands-free (SAE level: 2) driving assistance for engaged drivers. Updates to enhance Toyota Teammate Advanced Drive operation or to add features/functions are delivered to the vehicle directly through the Toyota Teammate multimedia head unit (earlier than version 5.00). The updates include the following: •Updates the Advanced Drive messages and displays. •Reduces the frequency of prompts to hold the steering wheel in certain circumstances (e.g., facial recognition impact reduced when wearing a medical mask). •Increases scenarios where lane change assist can be used. •Adjusts the speed to help avoid blind spots of other vehicles in adjacent lanes. •Enhances peripheral recognition using LiDARs. •Reduces lane change assist activation when standard construction cones or barrels are detected. •Alerts driver to nearby vehicles at certain highway entrance merging areas during low-speed driving. •Alerts driver when approaching a much slower vehicle ahead. •Increases the maximum Advanced Drive set speed to 85 mph. The release notes text below will be displayed to the customer: “Updates the Advanced Drive messages and displays, reduces the frequency of prompts to hold the steering wheel in certain circumstances (e.g., facial recognition impact reduced when wearing a medical mask), increases scenarios where lane change assist can be used, adjusts the speed to help avoid blind spots of other vehicles in adjacent lanes, enhances peripheral recognition using LiDARs, reduces lane change assist activation when standard construction cones or barrels are detected, alerts driver to nearby vehicles at certain highway entrance merging areas during low-speed driving, alerts driver when approaching a much slower vehicle ahead, increases the maximum Advanced Drive set speed to 85 mph.”
TSB0104212024-04-01. Service bulletin. TSB: Some 2018 ? 2024 model year Toyota vehicles equipped with an A25A-FKS, A25A-FXS, M20A-FKS, or M20A-FXS engine may exhibit one or more of the following conditions: ?Milky/discolored engine oil. ?An ?Oil Pressure Low? warning message on the Multi-information Display (MID). ?A MIL ON condition with Diagnostic Trouble Codes (DTCs) P05202A (Engine Oil Pressure Sensor/Switch ?A? Signal Stuck in Range) and/or P052477 (Engine Oil Pressure Too Low [Severe]) present. Moisture from blow-by gases condenses and accumulates in the engine oil during short trips in extreme cold weather. When the moisture in the oil freezes, the oil pressure may drop, and the aforementioned warning indicators may display. Follow the procedures in this bulletin to address these conditions.
T-SB-0047-232023-08-28. Service bulletin. TSB: Some 2021 ? 2023 model Mirai vehicles may exhibit a creaking or clicking type noise from the rear suspension member. This condition may occur when braking or when driving over speed bumps and uneven surfaces.

A bulletin is the manufacturer's note to its dealers. It is not part of this recall.

Check one vehicle officially