WenmarOpen by Wenmar Pro

Service bulletins for the 2017 Toyota Prius C

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

178 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Bulletins, newest first
Toyota Safety Re2018-12-17. Service bulletin. EQUIPMENT. Update on Technician Certification Requirements.
TTT0432172018-12-17. Service bulletin. ELECTRICAL SYSTEM:12V/24V/48V BATTERY. TT: Some Customers may complain about a Hybrid Vehicle Battery cooling system warning message. This warning message may appear when the HV Battery cooling system loses efficiency due to debris on the filter and or some object obstructing the air inlet.
TSB0182172018-12-17. Service bulletin. ELECTRICAL SYSTEM. TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes SB No. T-SB-0101-11. Applicability has been updated to include 2016 ? 2017 model year vehicles. Service Bulletin No. T-SB-0101-11 is Obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. When servicing interior electrical switches and components, please note the precautions in this bulletin to avoid damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or other compounds that may contaminate electrical contacts, and therefore increase electrical resistance and decrease switch performance. The use of any cleaners or fluids may increase the risk of further damage to electrical components.
T-TT-0493-182018-12-17. Service bulletin. SERVICE BRAKES. TT: Some 2016?2018 model year Prius vehicles may exhibit multiple conditions such as ABS MIL On, PCS/ICS/LDA/BSM Malfunction Message, Check Engine Light On, Skid Light On, Low Brake Force Message, and/or Brake Light Inoperative. Typically, more than one condition is present.
T-SB-0178-162018-12-17. Service bulletin. EQUIPMENT. TSB: Pre-Delivery Service (PDS) is a critical step in satisfying your dealership?s new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: * Careful inspection for paint chips/scratches and body dents/dings. * Proper operation of electrical accessories (including interior light, clock, and radio reset). * Interior cleanliness. * Proper function of mechanical systems.
T-SB-0177-162018-12-17. Service bulletin. EQUIPMENT. TSB: 2017 Pre-Delivery Service Check Sheet
T-SB-0134-162018-12-03. Service bulletin. ELECTRICAL SYSTEM. TSB: Supersession Notice. Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information.
T-TT-0414-16-Rev2018-12-03. Service bulletin. EQUIPMENT:ELECTRICAL; EQUIPMENT. TT: Some customers may encounter Bluetooth® connectivity concerns such as: ? Difficulty to pair the phone. ? Intermittent Bluetooth® failure to connect to the vehicle when first turning on the vehicle. ? Various Bluetooth® Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone or if they have restored their phone data/settings recently.
T-TT-0503-182018-12-03. Service bulletin. LANE DEPARTURE: BLIND SPOT DETECTION. TT: When used in conjunction with the Repair Manual, these Blind Spot Monitor, Forward Recognition Camera, and Front Millimeter Wave Radar tips leverage SSTs and readily available tools to support target placement in varying shop environments.
T-SB-0134-162018-11-26. Service bulletin. ENGINE. TSB: Supersession Notice. Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information.
T-TT-0503-182018-11-26. Service bulletin. LANE DEPARTURE: BLIND SPOT DETECTION. TT: When used in conjunction with the Repair Manual, these Blind Spot Monitor, Forward Recognition Camera, and Front Millimeter Wave Radar tips leverage SSTs and readily available tools to support target placement in varying shop environments.
T-SB-0313-172018-11-05. Service bulletin. SERVICE BRAKES. TSB: Some 2015 ? 2018 model year Toyota vehicles may exhibit brake vibration due to improper lug nut torque. Brake vibration can occur at any time if improper torque is applied to lug nuts. Even one lug nut over or under torqued can cause vibration.
L-SB-0015-18-Rev2018-10-22. Service bulletin. WHEELS. TSB: REVISION NOTICE June 26, 2018 Rev1: ? Applicability has been updated to include 2018 model year GS 300 and 2016 ? 2018 model year RC 300 vehicles. Any previous printed versions of this bulletin should be discarded. Some 2013 ? 2018 model year Lexus vehicles equipped with 2WD drivetrain and the F Sport package may exhibit a clicking noise from the front wheel area during a slow (parking lot) speed turn. Follow the Repair Procedure in this bulletin to address this condition. Refer to the video link below for an example of the clicking noise condition:
T-TT-0501-18-Rev2018-10-22. Service bulletin. EQUIPMENT:ELECTRICAL. TT: Some customers may experience a voice recognition inoperative condition or abnormal Entune? operation after performing an Entune? update.
Safety Recall an2018-10-15. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; EQUIPMENT. Update on Technician Certification Requirements.
PG006-01-Obsolet2018-10-15. Service bulletin. EQUIPMENT:OTHER:LABELS; EQUIPMENT. Technical Service Bulletin: OBSOLETE NOTICE: July 31, 2018: This bulletin is now obsolete. Please see T-SB-0304-17.
PG004-97-Obsolet2018-10-15. Service bulletin. EQUIPMENT; EQUIPMENT:OTHER:LABELS. Technical Service Bulletin: OBSOLETE NOTICE: July 31, 2018: This bulletin is now obsolete. Please see T-SB-0304-17.
T-TT-0503-18_Rev2018-10-15. Service bulletin. LANE DEPARTURE; VISIBILITY. TT: When used in conjunction with the Repair Manual, these Blind Spot Monitor, Forward Recognition Camera, and Front Millimeter Wave Radar tips leverage SSTs and readily available tools to support target placement in varying shop environments.
T-SB-0304-17_Rev2018-08-20. Service bulletin. EQUIPMENT. TSB: REVISION NOTICE July 31, 2018 Rev2: ? The Supersession Notice has been updated. January 11, 2018 Rev1: ? The Supersession Notice has been updated. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, and T-SB-0144-08. Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, and T-SB-0144-08 are obsolete and any printed versions should be discarded. Vehicle replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) may be available from Toyota, provided the request meets one of the criteria listed in this Service Bulletin. Replacement Certification Label and VIN Plate Criteria A replacement certification label and/or VIN plate may be requested if: ? The vehicle was in an accident and the label and/or plate is damaged or attached to a part that will be replaced during the repair. ? The label and/or plate was stolen.
T-SB-0234-17_Rev2018-08-20. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM:SOFTWARE. TSB: REVISION NOTICE July 20, 2018 Rev2 ? Applicability has been updated to include 2018 model year Corolla, Prius C, RAV4, and RAV4 HV vehicles. ? The entire bulletin has been updated. February 21, 2018 Rev1: ? The Introduction and Software Update sections have been updated. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. T-SB-0019-16. ? The Software Update section has been updated. Service Bulletin No. T-SB-0019-16 is obsolete and any printed versions should be discarded.
T-SB-0057-182018-08-20. Service bulletin. EQUIPMENT. TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. T-SB-0043-14. ? Applicability has been updated to include 2017 ? 2018 model year Toyota vehicles. Service Bulletin No. T-SB-0043-14 is obsolete and any printed versions should be discarded. The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system. NOTE New security provisions are required to obtain a reset passcode. It is critical to review the instructions for this new process BEFORE attempting to get a passcode in the new system.
T-TT-0501-18_Rev2018-07-16. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. TT: Some customers may experience a voice recognition inoperative condition or abnormal Entune operation after performing an Entune update.
T-TT-0501-182018-07-16. Service bulletin. EQUIPMENT. TT: Some customers may experience a voice recognition inoperative condition or abnormal Entune? operation after performing an Entune? update.
T-SB-0220-17_Rev2018-07-16. Service bulletin. FUEL SYSTEM, GASOLINE. TSB: REVISION NOTICE June 1, 2018 Rev1: ? Applicability has been updated to include 2018 model year Camry HV, Prius, and Prius Prime vehicles. ? The entire bulletin has been updated. Any previous printed versions of this bulletin should be discarded. Some 2016 ? 2018 model year Prius, 2017 ? 2018 model year Prius Prime, and 2018 model year Camry HV vehicles may exhibit an intermittent condition where it is difficult to refuel. This condition may be caused by the fuel filler door not opening completely, or interference between the fuel filler nozzle splash guard and the fuel door lock switch. If the fuel filler door does not open completely, or if interference occurs, the fuel vapor containment valve may return to a closed position after pressing the fuel door opening button. Follow the Repair Procedure in this bulletin to address this condition.
T-TT-0442-172018-07-02. Service bulletin. EQUIPMENT; EQUIPMENT:ELECTRICAL; ELECTRICAL SYSTEM. TT: Safety Connect is a vehicle option which requires a subscription fee for the system to be active. The first year of service is provided in the vehicle purchase price. Once the subscription has expired the DCM (Telematics Transceiver) will be in an inactive state. In some instances, a DCM may need to be replaced even though the customer is not using the service.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.