Service bulletin T-TT-0503-18
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10149197 |
| Published by NHTSA | 2018-11-26 |
| Manufacturer's number | T-TT-0503-18 |
| Manufacturer's date | 2018-08-17 |
| NHTSA component | LANE DEPARTURE: BLIND SPOT DETECTION |
NHTSA's summary
TT: When used in conjunction with the Repair Manual, these Blind Spot Monitor, Forward Recognition Camera, and Front Millimeter Wave Radar tips leverage SSTs and readily available tools to support target placement in varying shop environments.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Driver assistance, Blind spot detection
| TOYOTA AVALON | 2016, 2017, 2018, 2019 |
|---|---|
| TOYOTA C-HR | 2018, 2019 |
| TOYOTA CAMRY | 2018, 2019 |
| TOYOTA COROLLA | 2017, 2018, 2019 |
| TOYOTA COROLLA IM | 2017, 2018 |
| TOYOTA HIGHLANDER | 2017, 2018, 2019 |
| TOYOTA LAND CRUISER | 2016, 2017, 2018, 2019 |
| TOYOTA PRIUS | 2016, 2017, 2018, 2019 |
| TOYOTA PRIUS C | 2016, 2017, 2018, 2019 |
| TOYOTA PRIUS PRIME | 2019 (the catalog's model; the bulletin names a series or trim of it) |
| TOYOTA RAV4 | 2016, 2017, 2018, 2019 |
| TOYOTA RAV4 HYBRID | 2017 (the catalog's model; the bulletin names a series or trim of it) |
| TOYOTA SEQUOIA | 2018, 2019 |
| TOYOTA SIENNA | 2018, 2019 |
| TOYOTA TACOMA | 2018, 2019 |
| TOYOTA TUNDRA | 2018, 2019 |
| TOYOTA YARIS | 2017, 2018 |
| TOYOTA redundant RAV4 HV | 2016 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| T-TT-0558-19 | 2019-09-16. Service bulletin. TT: In some situations, the Blind Spot Monitor (BSM) Beam Axis may not update during the Blind Spot Monitor Beam Axis Confirmation. The procedure recommended below can be used to confirm the beam axis has been updated when performing the Blind Spot Monitor Beam Axis Confirmation. |
|---|---|
| T-TT-0503-18 | 2018-12-03. Service bulletin. TT: When used in conjunction with the Repair Manual, these Blind Spot Monitor, Forward Recognition Camera, and Front Millimeter Wave Radar tips leverage SSTs and readily available tools to support target placement in varying shop environments. |
| T-SB-0050-18 | 2018-07-16. Service bulletin. TSB: Some 2018 model year Camry and Camry HV vehicles equipped with Blind Spot Monitor (BSM) may exhibit a BSM outer mirror indicator that stays on without a vehicle in the detection area, after being passed by another vehicle. Follow the Repair Procedure in this bulletin to address this condition. |
| T-SB-0049-16 | 2018-06-11. Service bulletin. TSB: Some 2015 ? 2016 model year Avalon, Camry, Sienna, and Tundra vehicles equipped with Blind Spot Monitor may exhibit a Blind Spot Monitor Warning message with Diagnostic Trouble Code (DTC) C1AB2 Short to Ground in Outer Mirror Indicator (Master) or C1AB3 Short to Ground in Outer Mirror Indicator (Slave) stored. Follow the Repair Procedure in this bulletin to address this condition. |