WenmarOpen by Wenmar Pro

Service bulletins for the 2021 Toyota Highlander

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

231 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with type: Service bulletin are shown. Show all

Bulletins, newest first
T-SB-0110-20 Rev22026-09-09. Service bulletin. ENGINE. OBSOLETE NOTICE August 20, 2026: This bulletin is now obsolete. Please see T-SB-0051-26.
T-SB-0040-24 Rev12026-07-08. Service bulletin. STRUCTURE:BODY. Some 2020 – 2026 model year Highlander and Highlander Hybrid vehicles may exhibit a water leak from the roof rack attachment clips. This may be caused by the sealant in the roof channel obstructing the proper seating position for the clip gasket.
T-SB-0021-262026-04-08. Service bulletin. ELECTRICAL SYSTEM. Some 2020 – 2024 model year Highlander and Highlander Hybrid vehicles may exhibit a condition in which the air conditioner does not cool due to a leak and/or corrosion in the rear underbody air conditioner tube and accessory assembly. The anti-corrosion material has been updated to reduce the possibility of this condition.
T-SB-0104-21 Rev22026-03-07. Service bulletin. ENGINE. OBSOLETE NOTICE February 27, 2026: This bulletin is no longer applicable and is now obsolete.
T-SB-0106-22 Rev22026-02-11. Service bulletin. ELECTRICAL SYSTEM. OBSOLETE NOTICE January 30, 2026: This bulletin is now obsolete. Please see T-SB-0001-26.
T-SB-0001-262026-02-11. Service bulletin. ELECTRICAL SYSTEM. Some 2018 – 2024 model year Toyota vehicles equipped with a Premium Audio with Dynamic Navigation System require a Special Service Tool (SST) USB flash drive to update the map, points of interest, and system software.
T-SB-0055-24 Rev22026-02-11. Service bulletin. UNKNOWN OR OTHER. Some 2005 – 2026 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
T-SB-0086-252025-12-05. Service bulletin. STRUCTURE:BODY. Some 2020 – 2023 model year Highlander and Highlander Hybrid vehicles may exhibit a condition in which the Power Back Door (PBD) will not open or close and/or stops moving while opening or closing. A modified PBD unit assembly is available to address these conditions.
25TD012025-10-08. Service bulletin. ELECTRICAL SYSTEM. TECHNICAL INSTRUCTIONS FOR 25TD01 REAR TRACTION MOTOR CABLE CORROSION CERTAIN 2019 - 2024 RAV4 HV (AWD), 2021- 2024 RAV4 PRIME, 2020-2024 HIGHLANDER HV (AWD), 2021-2024 VENZA HV, 2023-2024 CROWN HV VEHICLES
25TD012025-10-08. Service bulletin. ELECTRICAL SYSTEM. TECHNICAL INSTRUCTIONS FOR 25TD01 REAR TRACTION MOTOR CABLE CORROSION CERTAIN 2019 - 2024 RAV4 HV (AWD) 2021- 2024 RAV4 PRIME 2020-2024 HIGHLANDER HV (AWD) 2021-2024 VENZA HV 2023-2024 CROWN HV
T-SB-0112-24 Rev22025-07-10. Service bulletin. ENGINE. Some 2018 – 2021 model year Toyota vehicles equipped with an A25A-FKS, A25A-FXS, or M20A-FKS engine may exhibit a condition in which an “Engine Maintenance Required” message is displayed in the Multi-Information Display (MID). Additionally, the vehicle will exhibit DTC(s) P268111 (Engine Coolant Bypass Valve Circuit Short to Ground) and/or P268115 (Engine Coolant Bypass Valve Circuit Short to Battery or Open).
T-TT-0780-252025-06-06. Service bulletin. ELECTRICAL SYSTEM. To assist with the early detection and early resolution of audio related concerns you may be asked to recover MMR data from the head unit. The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by FTS and/or FPE.
T-TT-0780-252025-05-15. Service bulletin. ELECTRICAL SYSTEM. To assist with the early detection and early resolution of audio related concerns you may be asked to recover MMR data from the head unit. The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by FTS and/or FPE.
T-SB-0106-22 Rev22025-04-08. Service bulletin. ELECTRICAL SYSTEM. Some 2018 – 2024 model year Toyota vehicles equipped with a Premium Audio with Dynamic Navigation System require a Special Service Tool (SST) USB flash drive to update the map, points of interest, and system software. The SST is used with applicable vehicles to deliver the update, however, the process for generating license keys differs from previous generations.
T-SB-0013-24 Rev12025-04-08. Service bulletin. ELECTRICAL SYSTEM. The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased and can never be reused. Another feature, Add/Remove Key, is also available. Once a key is removed, it can never be reused.
22TD022025-04-08. Service bulletin. FUEL/PROPULSION SYSTEM. TECHNICAL INSTRUCTIONS LIMITED SERVICE CAMPAIGN 22TD02 FUEL INLET HOUSING CERTAIN 2021 MODEL YEAR HIGHLANDER CERTAIN 2021 MODEL YEAR HIGHLANDER HYBRID
T-SB-0106-22 Rev22025-03-11. Service bulletin. ELECTRICAL SYSTEM. Some 2018 – 2024 model year Toyota vehicles equipped with a Premium Audio with Dynamic Navigation System require a Special Service Tool (SST) USB flash drive to update the map, points of interest, and system software. The SST is used with applicable vehicles to deliver the update, however, the process for generating license keys differs from previous generations.
T-SB-0013-24 Rev12025-03-11. Service bulletin. ELECTRICAL SYSTEM. The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased and can never be reused. Another feature, Add/Remove Key, is also available. Once a key is removed, it can never be reused.
22TD022025-03-11. Service bulletin. FUEL/PROPULSION SYSTEM. TECHNICAL INSTRUCTIONS LIMITED SERVICE CAMPAIGN 22TD02 FUEL INLET HOUSING CERTAIN 2021 MODEL YEAR HIGHLANDER CERTAIN 2021 MODEL YEAR HIGHLANDER HYBRID
T-TT-0771-252025-02-12. Service bulletin. ENGINE. Some 2021-2025 MY Highlander HV, Sienna HV, RAV4, and RAV4 HV, may exhibit an oil leak from the area where the camshaft cover, camshaft housing, and the timing chain covers meet. This is typically seen on the exhaust side of the engine.
T-SB-0112-24 Rev12025-02-12. Service bulletin. ENGINE. Some 2018 – 2021 model year Toyota vehicles equipped with an A25A-FKS, A25A-FXS, or M20A-FKS engine may exhibit a condition in which an “Engine Maintenance Required” message is displayed in the Multi-Information Display (MID). Additionally, the vehicle will exhibit DTC(s) P268111 (Engine Coolant Bypass Valve Circuit Short to Ground) and/or P268115 (Engine Coolant Bypass Valve Circuit Short to Battery or Open).
T-SB-0110-20 Rev22025-01-09. Service bulletin. ENGINE. This bulletin includes basic procedures for performing a rescue charge at battery on high voltage (HV) Ni-MH and Li-ion batteries. This bulletin should be used in conjunction with the applicable model and model year Repair Manual while performing the battery rescue charge. The GRX-5100 should be used wherever the Repair Manual references the Toyota Hybrid System (THS) charger.
T-SB-0039-24 Rev22025-01-09. Service bulletin. STRUCTURE:BODY. The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
T-SB-0038-24 Rev22025-01-09. Service bulletin. STRUCTURE:BODY. To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
T-SB-0035-24 Rev22025-01-09. Service bulletin. STRUCTURE:BODY. Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.