Service bulletins for the 2018 Toyota Highlander
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
268 on file from NHTSA, as of 2026-10-19.
About P0171 on the 2018 Toyota Highlander: what the code means, and the bulletins and recalls about the same components.
By type
By component
By trouble code
By topic
Only bulletins with trouble code: P0171 are shown. Show all
| TSB000923 | 2023-05-01. Service bulletin. EQUIPMENT; SERVICE BRAKES, HYDRAULIC. TSB: Some 2014 ? 2020 model year Toyota vehicles may exhibit a hard start and/or MIL ON condition with one or more of the following Diagnostic Trouble Codes (DTCs): ?DTC P0171 and/or P0174 (System Too Lean Bank 1/Bank 2) ?DTC P0087 Fuel Rail / System Pressure ? Too Low Techstream data list analysis may reveal positive fuel trims including a no pressure condition verified by a manual fuel pressure gauge. Follow the Repair Procedure in this bulletin to address these conditions. |
|---|---|
| T-SB-0072-19 | 2019-07-15. Service bulletin. ELECTRICAL SYSTEM. TSB: Some 2014 ? 2018 model year Highlander and Highlander Hybrid vehicles may exhibit one or more of the following conditions. ? Various drivability concerns ? Low or no fuel pressure ? Diagnostic Trouble Codes (DTCs) (Including but not limited to P1603, P1604, P1605, P0171, P0300, P0302, P0304, U0100) ? Some 2014 ? 2018 model year Highlander Hybrid vehicles may exhibit DTC P134A. These conditions may be caused by corrosion/water in the A43 ECM connector (Highlander) or the A9 inverter water pump connector (Highlander HV). The corrosion in the A43 and A9 connectors is due to poorly sealed or damaged aftermarket windshield deicer harnesses. Follow the Repair Procedure in this bulletin to address these conditions. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.