P0171 on the 2018 Toyota Highlander
The bulletins listed name this code in NHTSA's summary, or are about the same components. A bulletin or a recall listed here may apply to the model year. None of it is a diagnosis.
Nobody has written a description of this code yet.
| TSB000923 | 2023-05-01. Service bulletin. TSB: Some 2014 ? 2020 model year Toyota vehicles may exhibit a hard start and/or MIL ON condition with one or more of the following Diagnostic Trouble Codes (DTCs): ?DTC P0171 and/or P0174 (System Too Lean Bank 1/Bank 2) ?DTC P0087 Fuel Rail / System Pressure ? Too Low Techstream data list analysis may reveal positive fuel trims including a no pressure condition verified by a manual fuel pressure gauge. Follow the Repair Procedure in this bulletin to address these conditions. |
|---|---|
| T-SB-0072-19 | 2019-07-15. Service bulletin. TSB: Some 2014 ? 2018 model year Highlander and Highlander Hybrid vehicles may exhibit one or more of the following conditions. ? Various drivability concerns ? Low or no fuel pressure ? Diagnostic Trouble Codes (DTCs) (Including but not limited to P1603, P1604, P1605, P0171, P0300, P0302, P0304, U0100) ? Some 2014 ? 2018 model year Highlander Hybrid vehicles may exhibit DTC P134A. These conditions may be caused by corrosion/water in the A43 ECM connector (Highlander) or the A9 inverter water pump connector (Highlander HV). The corrosion in the A43 and A9 connectors is due to poorly sealed or damaged aftermarket windshield deicer harnesses. Follow the Repair Procedure in this bulletin to address these conditions. |
2 on file from NHTSA, as of 2026-10-19. See them in the bulletin list. A bulletin lists model years: read the document for which vehicles it concerns.