Service bulletins for the 2016 Toyota Avalon
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
281 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
Only bulletins with component: Driver assistance are shown. Show all
| TTT063620 | 2022-06-21. Service bulletin. BACK OVER PREVENTION; SERVICE BRAKES, HYDRAULIC. TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions |
|---|---|
| T-SB-0088-21 | 2021-11-15. Service bulletin. FORWARD COLLISION AVOIDANCE: SENSING SYSTEM: RADAR; BACK OVER PREVENTION: SENSING SYSTEM: RADAR. TSB: For proper calibration of the millimeter wave radar sensor, the vehicle and radar target must be on a level surface with a consistent plane. If a level surface with a consistent plane is not available, use the Floor Slope Compensation Procedure in this service bulletin in conjunction with the appropriate model and model year Repair Manual instructions when adjusting the millimeter wave radar sensor. |
| T-TT-0663-21 | 2021-10-25. Service bulletin. LANE DEPARTURE; VISIBILITY. TT: When used in conjunction with the Repair Manual, these Blind Spot Monitor, Forward Recognition Camera, and Front Millimeter Wave Radar tips leverage SSTs and readily available tools to support target placement in varying shop environments. |
| T-TT-0636-20 Rev | 2021-04-19. Service bulletin. BACK OVER PREVENTION; SERVICE BRAKES. TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions. |
| T-TT-0636-20 | 2021-02-16. Service bulletin. BACK OVER PREVENTION; SERVICE BRAKES. TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions. |
| T-TT-0537-19_Rev | 2020-05-11. Service bulletin. VISIBILITY; LANE DEPARTURE. TT: The blind spot monitor (BSM) sensor angle inspection is used to confirm that the BSM sensor is within the specified angle before performing axis beam adjustment. When used in conjunction with the repair manual, these BSM tips leverage SSTs and readily available tools to support sensor angle confirmation in varying shop environments. |
| T-TT-0537-19 | 2019-05-13. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; VISIBILITY; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; LANE DEPARTURE. TT: The blind spot monitor (BSM) sensor angle inspection is used to confirm that the BSM sensor is within the specified angle before performing axis beam adjustment. When used in conjunction with the repair manual, these BSM tips leverage SSTs and readily available tools to support sensor angle confirmation in varying shop environments. |
| T-TT-0515-18 | 2019-02-19. Service bulletin. EQUIPMENT; FORWARD COLLISION AVOIDANCE: SENSING SYSTEM: CAMERA; FORWARD COLLISION AVOIDANCE. TT: When adjusting the Forward Recognition Camera on vehicles with Toyota Safety Sense, it can be difficult to print the repair manual target to the proper size. |
| T-TT-0503-18 | 2018-12-03. Service bulletin. LANE DEPARTURE: BLIND SPOT DETECTION. TT: When used in conjunction with the Repair Manual, these Blind Spot Monitor, Forward Recognition Camera, and Front Millimeter Wave Radar tips leverage SSTs and readily available tools to support target placement in varying shop environments. |
| T-TT-0503-18 | 2018-11-26. Service bulletin. LANE DEPARTURE: BLIND SPOT DETECTION. TT: When used in conjunction with the Repair Manual, these Blind Spot Monitor, Forward Recognition Camera, and Front Millimeter Wave Radar tips leverage SSTs and readily available tools to support target placement in varying shop environments. |
| T-TT-0503-18_Rev | 2018-10-15. Service bulletin. LANE DEPARTURE; VISIBILITY. TT: When used in conjunction with the Repair Manual, these Blind Spot Monitor, Forward Recognition Camera, and Front Millimeter Wave Radar tips leverage SSTs and readily available tools to support target placement in varying shop environments. |
| T-SB-0049-16 | 2018-06-11. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; LANE DEPARTURE: BLIND SPOT DETECTION. TSB: Some 2015 ? 2016 model year Avalon, Camry, Sienna, and Tundra vehicles equipped with Blind Spot Monitor may exhibit a Blind Spot Monitor Warning message with Diagnostic Trouble Code (DTC) C1AB2 Short to Ground in Outer Mirror Indicator (Master) or C1AB3 Short to Ground in Outer Mirror Indicator (Slave) stored. Follow the Repair Procedure in this bulletin to address this condition. |
| T-SB-0166-16 | 2018-04-02. Service bulletin. BACK OVER PREVENTION; STRUCTURE:BODY:DOOR:HINGE AND ATTACHMENTS. TSB: Some 2013 ? 2016 model year Avalon and Avalon HV vehicles may exhibit a rattle noise from the base of the left front door trim during audio playback. Follow the procedure in this bulletin to address this condition. |
| T-SB-0184-17 | 2018-04-02. Service bulletin. AIR BAGS; BACK OVER PREVENTION. TSB: This Service Bulletin includes precautions and key points for the front camera for Toyota Safety Sense C and Toyota Safety Sense P adjustment procedures. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.