WenmarOpen by Wenmar Pro

Service bulletins for the 2016 Subaru Legacy

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

468 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Body and frame are shown. Show all

Bulletins, newest first
13-108-252025-09-02. Service bulletin. STRUCTURE:BODY. This bulletin provides information on paint codes for vehicles in the 2026 line up.
12-192-15R2021-03-04. Service bulletin. STRUCTURE; VISIBILITY:WINDSHIELD. Subaru of America, Inc. (SOA) Quality Assurance has identified an increase in the number of cracked windshields on some 2015 and 2016MY Legacy and Outback models. SOA has now further extended the warranty to 8 years / unlimited miles.
12-246-18R2019-08-06. Service bulletin. VISIBILITY:SUN/MOON ROOF ASSEMBLY; ELECTRICAL SYSTEM; STRUCTURE. This bulletin provides a procedure for diagnosing and repairing customer concerns of a “popping” or “snapping” -type sound heard when opening the sunroof. The sound may occur when the rear portion of the glass lid weatherstrip contacts or catches the roof frame when the sunroof is opened.
12-249-182018-10-01. Service bulletin. STRUCTURE. This Service Information bulletin advises of a design change made to the rear body panel. This panel is located between the trunk and the rear glass and incorporates the package shelf. It has been re-designed with convex surfaces added to prevent items going into or out of the trunk from being scratched or caught by the rear edges of the reinforcement panels.
12-246-182018-08-20. Service bulletin. STRUCTURE. This bulletin provides a procedure for diagnosing and repairing customer concerns of a "popping" or "snapping" -type sound heard when opening the sunroof. The sound may occur when the rear portion of the glass lid weatherstrip contacts or catches the roof frame when the sunroof is opened.
12-230-172018-04-02. Service bulletin. STRUCTURE:BODY:TRUNK LID. This Service Information bulletin provides precautions to use when installing the trunk garnish panel located between the combination lamps. If the garnish is not installed properly, the small rubber protector(s) at the bottom edges of the garnish may become displaced and possibly allow the panel to contact / scratch the painted surface of the trunk. Over time, the finish may abrade through to bare metal and potentially allow rust to develop.
12-219-172017-08-14. Service bulletin. STRUCTURE:BODY:HOOD; LATCHES/LOCKS/LINKAGES:HOOD:LATCH. This bulletin provides new part information and an identification procedure to address a small number of vehicles identified with a sticking secondary hood latch mechanism. The hood latch mechanism is exposed to foreign materials during normal use which can accumulate and cause the secondary portion to not operate properly. The spring-loaded secondary latch is manually released (after pulling the inside hood release lever to operate the primary latch mechanism) by the operator to open the hood. If faulty, the spring may not have enough force to return the lever back to its original position while the hood is open. Once the hood is closed, the secondary latch is forced into the closed position by design.
12-218-172017-08-14. Service bulletin. STRUCTURE:BODY:DOOR; STRUCTURE. This bulletin provides supplemental information and an inspection point to use when diagnosing a wind rushing sound concern that persists on vehicles: * past the production change provided in TSB 12-176-14R, dated 10/28/2015 or * which have already had the repairs outlined in TSB 12-176-14R performed and the concern persists from the front door(s). PRODUCTION CHANGE INFORMATION: The latest production changes were implemented during September, 2015 starting with the following VINS: G3014581 (LEGACY) and G3230683 (OUTBACK).
12-195-152017-03-08. Service bulletin. STRUCTURE:BODY:DOOR; VISIBILITY:REARVIEW MIRRORS/DEVICES:EXTERIOR. SHOULD YOU RECEIVE A CUSTOMER CONCERN OF VIBRATION OR LOOSENESS IN EITHER OF THE DOOR MIRRORS, A DESIGN CHANGE HAS BEEN MADE TO THE 3 MIRROR HEAD MOUNTING HOLES IN THE MOUNTING BASE. IN ADDITION, A NEW RETAINING BOLT AND TIGHTENING TORQUE SPECIFICATION ARE NOW USED TO SECURE THE MIRROR HEAD TO THE MOUNTING BASE. THIS BULLETIN PROVIDES A PROCEDURE FOR REPAIRING THE EXISTING MIRROR ASSEMBLY BY REPLACING THE THREE MOUNTING SCREWS WITH UPDATED FASTENERS. NOTE: REFER TO TSB 12-152-13 DATED 6/17/2013 FOR RELATED INFORMATION ON BRZ MODELS.
09-61-15R2017-03-08. Service bulletin. STRUCTURE:BODY:DOOR; FUEL SYSTEM, OTHER. "THIS BULLETIN ANNOUNCES A DESIGN CHANGE TO THE FUEL FILLER DOOR (SAUCER) ASSEMBLY TO ADDRESS CUSTOMER CONCERNS OF IT BEING DIFFICULT TO OPEN AND / OR CLOSE. THE STRIKER PORTION’S SHAPE HAS BEEN CHANGED AS SHOWN IN THE CROSS-SECTION ILLUSTRATION BELOW ALONG WITH THE TYPE OF PLASTIC MATERIAL USED IN THE CONSTRUCTION OF THE SAUCER ASSEMBLY."
12-185-15R2016-09-28. Service bulletin. STRUCTURE:BODY:DOOR. THIS BULLETIN PROVIDES A REPAIR PROCEDURE TO ADDRESS A WIND RUSHING AND / OR FLUTTERING-TYPE SOUND ORIGINATING FROM THE “B” PILLAR AREA OF THE VEHICLE. THE SOUND IS USUALLY REPORTED TO BE MORE PREVALENT WHEN CROSSWINDS ARE PRESENT AND / OR AT HIGHWAY SPEEDS. THE PROCEDURE INVOLVES THE INSTALLATION OF A LONGER, 320MM PIECE OF BUTYL ADHESIVE TO SECURE THE UPPER FRONT CORNER AREA OF THE REAR DOOR FRAME WEATHERSTRIP. TO ADDRESS CUSTOMER CONCERNS OF A WIND RUSHING SOUND COMING FROM THE FRONT AND / OR REAR DOOR SASH AREA, SEE TSBS 12-176-14R AND 12-177-14R.
12-135-12R2016-05-13. Service bulletin. STRUCTURE. SUMMARY TO BE PROVIDED ON A FUTURE DATE.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.