WenmarOpen by Wenmar Pro

Service bulletins for the 2017 Subaru Impreza

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

569 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Electrical system are shown. Show all

Bulletins, newest first
15-199-16R2018-05-29. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; ELECTRICAL SYSTEM:SOFTWARE. This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field and listed below involving the Clarion Display Audio unit with 6.2? display. The procedure will involve downloading the applicable software update files from Subarunet then loading them onto a flash drive for audio unit installation.
16-112-18R2018-04-16. Service bulletin. ELECTRICAL SYSTEM. This bulletin announces a design change to the CVT select lever (shifter) mechanism in response to isolated customer concerns of not being able to remove the key from the ignition switch when the vehicle is in Park. The cause is contamination of the Park-Range switch internal components
15-211-17R2018-04-16. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM); EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.. The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the new Harman Gen 3 Audio and Navigation head units utilized. The procedure will involve either downloading the software update files from Subarunet (or using those sent directly from Nuspire) and transferring them onto a flash drive for head unit installation.
11172172018-04-02. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. This bulletin announces the availability of reprogramming files to optimize the ECM. The new logic will address isolated customer concerns of a hesitation and / or a stumble felt on light acceleration and in some cases, a possible DTC P05A0 which may set in the ECM memory.
07-123-172018-04-02. Service bulletin. ELECTRICAL SYSTEM. A design improvement has been made to the warning box assembly for improved responsiveness. The warning box is located inside the overhead map light assembly as shown in the illustrations below. The warning box part number has also been changed. On affected vehicles, the passenger?s airbag ON/OFF indicator flashes, the airbag warning lamp illuminates and DTC B1661: ?PASSENGER?S AIRBAG ON/OFF INDICATOR FAILURE? is stored. This DTC indicates communication between the warning box and combination meter has failed. The condition is more likely to be observed during high ambient temperature conditions. In some cases, there may also be a DTC B1502: ?WARNING BOX COMMUNICATION MALFUNCTION? stored in the combination meter memory.
07-131-182018-03-13. Service bulletin. ELECTRICAL SYSTEM; EXTERIOR LIGHTING:BRAKE LIGHTS. This bulletin provides a measurement and adjustment procedure for the stop lamp switch. An improperly adjusted (or faulty) stop lamp switch can cause any of the DTCs listed above to set and result in the related system?s (e. g. VDC and/or EyeSight) warning lamp to illuminate.
06-60-172017-12-15. Service bulletin. EQUIPMENT; STRUCTURE; ELECTRICAL SYSTEM. This bulletin announces reprogramming files to optimize the Vehicle Dynamic Control (VDC) control module. When diagnosing an inoperative VDC system, the Select Monitor may display incorrect freeze frame data.
15-211-17R2017-09-14. Service bulletin. EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM); ELECTRICAL SYSTEM:SOFTWARE. The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the new Harman Gen 3 audio and Navigation head units utilized in the new 2017MY Impreza. The procedure will involve either downloading the software update files from Subarunet (or using those sent directly from Nuspire) and transferring them onto a flash drive for head unit installation. It is VERY IMPORTANT to read and understand this information completely before proceeding.
15-211-17R2017-09-14. Service bulletin. EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM); ELECTRICAL SYSTEM:SOFTWARE. The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the new Harman Gen 3 audio and Navigation head units utilized in the new 2017MY Impreza. The procedure will involve either downloading the software update files from Subarunet (or using those sent directly from Nuspire) and transferring them onto a flash drive for head unit installation. It is VERY IMPORTANT to read and understand this information completely before proceeding.
15-196-16R2017-08-14. Service bulletin. ELECTRICAL SYSTEM. ONLY 2016-2017MY: Those Models equipped with STARLINK Telematics. Provisioning is the process by which the DCM receives the subscription request and activates the related DCM features requested as outlined in the specific subscription contract. If provisioning is not successful then the DCM may remain in an inactive state and the requested services may not be activated for the customer. Field investigation has found that this may be a result of three possible conditions. * The DCM may be off the network due to vehicle storage or other network factors. * The DCM may be lacking power or ground due to some body side electrical concern. * The DCM may have an internal failure.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.