WenmarOpen by Wenmar Pro

Service bulletins for the 2008 Saturn Aura

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1004 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Brakes are shown. Show all

Bulletins, newest first
15-00-89-004E2022-10-11. Service bulletin. POWER TRAIN; SUSPENSION; ENGINE AND ENGINE COOLING; SERVICE BRAKES, HYDRAULIC; STEERING. This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage.
PIP4723F2022-02-14. Service bulletin. SERVICE BRAKES, HYDRAULIC; FUEL SYSTEM, GASOLINE. This Preliminary Information communicates to the dealer the process for downloading or updating operating software for the Tire Pressure Monitor, Active Fuel Injector tester, multi media tester, PICO Scope, GR8 starting/charging tester and Vehicle Data Recorder tools, giving website address and step by step instructions to complete the update.
PIT3271J2019-12-09. Service bulletin. WHEELS; SERVICE BRAKES, AIR:ANTILOCK. This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection.
00-05-22-002N2018-06-04. Service bulletin. EQUIPMENT; SERVICE BRAKES. This informational bulletin provides information for Disc Brake Warranty Service and Procedures.
00-05-22-002O2018-05-07. Service bulletin. SERVICE BRAKES. This informational bulletin provides technicians with a brake lathe calibration procedure.
GCUS-9-36642017-12-22. Service bulletin. SERVICE BRAKES. 16188 Special Coverage. Some vehicles may have a condition where increased resistance in the body control module (BCM) connection system can result in voltage fluctuations or intermittency in the brake apply sensor (BAS) circuit that can cause brake lamp malfunction. Specifically, the brake lamps may either illuminate without the brake pedal applied, or turn off when the pedal is applied. If this condition occurs within the stated terms, dealers will attach the wiring harness to the BCM with a spacer, apply dielectric lubricant to the BCM X2 (C2) connector and the BAS harness connector, and relearn the brake pedal home position. The repairs will be made at no charge to the customer.
99-04-20-002I2017-08-15. Service bulletin. PARKING BRAKE:DRIVELINE. This informational bulletin explains a normal condition for what and how the drive line can clunk.
00-05-22-002O2017-08-15. Service bulletin. SERVICE BRAKES. This informational bulletin provides technicians with a brake lathe calibration procedure.
06-00-89-026L2017-08-15. Service bulletin. SERVICE BRAKES; EQUIPMENT:ELECTRICAL; ENGINE AND ENGINE COOLING:EXHAUST SYSTEM; EQUIPMENT:APPLIANCE:AIR CONDITIONER; POWER TRAIN:AXLE ASSEMBLY; EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM. This warranty administration bulletin provide policy information on a revised customer concern not duplicated/verified labor operation numbers and how to submit CCND.
PIT4907A2017-08-15. Service bulletin. SERVICE BRAKES. This Preliminary Information communication provides information to the technician about brake rotors on new vehicles and replacement parts from General Motors Service Parts Operations. Technician should be advised the costing should not be removed from the brake rotor it will wear off with normal brake usage. Dealer should communicate to the customer this condition is a normal operating characteristic of their vehicle.
PIT4943C2017-08-15. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; FUEL SYSTEM, GASOLINE; SERVICE BRAKES, HYDRAULIC. This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp. Technician may find Diagnostic Trouble Code P0442. Technician will need to review Techlink article from May 2013 titled "Using the Evaporative Emissions System Tester" Technician will need to follow these steps to help diagnose the issue. First after the P0442 has been verified do not disturb any of the fuel system components. The technician now can use the scan tool to close the Evaporative Emissions System. If possible change the tank pressure sensor units from inch_H2O to milimeter_Hg for better resolution. Now the vehicle can be stared to monitor the tank pressure sensor output value for approximately two minutes. If the tank pressure sensor value does change, pressurize the fuel tank side of the purge solenoid with the GE 41413-A / J 41413-A and the necessary adaptors. Now add smoke and allow pressure to stabilize for 2 minutes. If smoke is allowed to pass through the purge solenoid, replace the purge solenoid. If the tank pressure sensor value does not change, then install CH-48096 adaptor between the purge line from the canister and the purge solenoid. With the Evaporative Emissions System closed, pressurize the system through the CH-48096 adaptor and allow the system to completely stabilize, by observing the Press / Vac Gauge for a minimum of 5 minutes. Now add smoke to the system with GE 41413-A / J 41413-A after system stabilization. Now inspect the purge solenoid, engine side, fuel cap, canister vent solenoid filter and any line quick connects. When the leak is unable to be located, test under a vacuum condition. his type of leak may be detected by using the scan tool Purge/Seal function to create a vacuum in the Evaporative Emissions System and then observe the FTP sensor parameter for vacuum decay.
PIC--4330B2009-03-21. Service bulletin. SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES. CHEVROLET: UNABLE TO RELEARN THE BRAKE PEDAL POSITION (BPP) SENSOR. *PE
PIC-4883A2008-12-02. Service bulletin. SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES. GMC: BRAKE PEDAL CLUNK POSSIBLE BRAKE DRAG C0131. WITH STEERING WHEEL ADJUSTED IN FULL DOWN POSITION, THERE MAY BE A CLUNK WHEN THE BRAKE PEDAL IS RELEASED. *PE
PIC-4330A2008-10-03. Service bulletin. SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES. GMC: UNABLE TO RELEARN THE BRAKE PEDAL POSITION (BPP) SENSOR. HAVE DIFFICULTY PERFORMING THE BRAKE PEDAL POSITION (BPP) RELEARN. MODELS CHEVROLETS, PONTIACS AND SATURNS. *PE
0705250042008-02-26. Service bulletin. SERVICE BRAKES, AIR:ANTILOCK:ABS WARNING LIGHT; SERVICE BRAKES, AIR:ANTILOCK:WHEEL SPEED SENSOR. ANTILOCK BRAKE SYSTEM (ABS) LIGHT ON, ELECTRONIC STABILITY CONTROL (ESC)/TRACTION CONTROL SYSTEM (TCS) LIGHT ON, SERVICE ESC MESSAGE IN DIC, DTC'S C0035, C0040, C0045, C0050 SET (REPROGRAM ELECTRONIC BRAKE CONTROL MODULE (EBCM)). *NJ
PIC-46582007-12-10. Service bulletin. SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES; VEHICLE SPEED CONTROL:ACCELERATOR PEDAL. ADJUSTABLE PEDALS WILL NOT ADJUST INOPERATIVE. *NJ UPDATED 3/13/09. *PE UPDATED 8/1/11. *PE

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.