WenmarOpen by Wenmar Pro

Service bulletins for the 2013 Ram 3500

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

535 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Engine are shown. Show all

Bulletins, newest first
1129062026-07-02. Service bulletin. ENGINE. BEARING - CRANKSHAFT THRUST and KIT
1129062026-07-02. Service bulletin. ENGINE. BEARING - CRANKSHAFT THRUST and KIT
67A Rev 4 Combo2024-07-02. Service bulletin. ENGINE. Emission Recall 67A D Truck Engine Calibration
67A Rev 3 Combo2024-06-28. Service bulletin. ENGINE. EMISSION RECALL 67A D Truck Engine Calibration
S1625000004 REV.A2024-06-05. Service bulletin. ENGINE; UNKNOWN OR OTHER. On Board Diagnosis (OBD) Monitor Readiness Information
Reference67A2024-03-18. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL. Emission Recall 67A D Truck Engine Calibration
Reference67A2024-01-16. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL; ENGINE AND ENGINE COOLING. Emission Recall 67A - D Truck Engine Calibration
09013232023-09-25. Service bulletin. ENGINE AND ENGINE COOLING. 6.7L New Oil Usage Information Incorrect oil used. This bulletin provides information regarding the correct oil grade to use on the 6.7L Cummins used in the 2023 to 2013 HD Trucks. The following information is intended to eliminate confusion.
07007232023-07-31. Service bulletin. ENGINE AND ENGINE COOLING. Water Quality When Mixed With Engine Coolant
18048232023-05-30. Service bulletin. EQUIPMENT; ENGINE AND ENGINE COOLING. wiTECH Small Leak Verification Test (SLVT) - P0456-EVAP SYSTEM SMALL LEAK
18062142023-02-21. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING. 6.7L Diagnostic and System Improvements
S21090000042023-01-17. Service bulletin. ENGINE AND ENGINE COOLING. Issue involves overheating, running hot, coolant leaks and related symptoms after a Mopar replacement engine has been installed in the vehicle.
18030142023-01-17. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM; POWER TRAIN. Diagnostic and System Improvements
850492023-01-09. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION:SEALS/GASKETS; UNKNOWN OR OTHER. COOLER - EGR
S22090000042022-12-19. Service bulletin. EQUIPMENT; ENGINE AND ENGINE COOLING. If a Mopar oil filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils.
25001162022-11-21. Service bulletin. ENGINE AND ENGINE COOLING; FUEL SYSTEM, DIESEL. Diagnosing A Urea Module That Is Exposed To Diesel Fuel This bulletin involves discussing what will happen to the rubber material used in the urea pump when exposed to diesel fuel. This unit is sometimes referred to as the Selective Catalyst Reductant (SCR) module or the Adblue Delivery Module (ADM). Units exposed to hydrocarbons have a particular failure mode, the rubber heater unit is crinkled and in some cases the metal heater protrudes through the rubber membrane. The rubber material used in this unit is designed to withstand Diesel Exhaust Fluid (DEF) only. Exposure to fluids that contain hydrocarbons (i.e. diesel fuel) will damage the unit beyond repair. Units returned that exhibit this failure mode will have warranty claims that are rejected. Units that exhibit this failure mode should be considered customer abuse and should not be covered under warranty. Use the Hydroscopic test paper (P/N 223-44-863) available through MoparEssentialTools.com to confirm exposure.
90033192022-10-24. Service bulletin. ELECTRICAL SYSTEM; BACK OVER PREVENTION; POWER TRAIN; ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER. Turbocharger, Turbo Speed Sensor, Turbo Gaskets and Seals 1. Do Not Replace Turbocharger for Exhaust Brake Operation Complaints. Do not replace the turbocharger for complaints of exhaust brake operating when the Exhaust Brake switch is off. Replacing the turbocharger will not address these complaints. Update the PCM with the new software version to correct this issue. 2. Turbo Speed Sensor is Now Serviceable. If a Turbocharger Speed Sensor is being replaced for a P2580 or any other reason, the Turbo Speed Sensor is now available separate from the Turbocharger Kit. do not replace the entire Turbocharger Kit. 2013-2015 Chassis Cab or Pickup - PN 68210095A$ 2007-2012 Chassis Cab or Pickup - PN 68039104A$. 3. Replace Exhaust Gaskets with Turbocharger Removal.~ If turbocharger is removed/replaced, the following items are not reusable and must be replaced: Turbocharger Gasket Turbocharger Outlet Seal Turbocharger Band Clamp If the front exhaust pipe is removed/replaced, the following items are not reusable and must be replaced. Turbocharger Outlet Seal Turbocharger Band Clamp
683328102022-10-17. Service bulletin. ENGINE AND ENGINE COOLING. Service - Four Piece Oil Pan Gasket All Cummins Equipped Vehicles ONLY - The replacement oil pan gasket can be a four piece gasket rather than a single piece gasket. This applies to Cummins 5.9L and 6.7L engines only. Installation: 1. Clean the oil pan T-joints.~ 2. Fill the T-joint between the pan rail/gear housing and pan rail/rear seal retainer with sealant. Use Mopar® Silicone Rubber Adhesive Sealant or equivalent. 3. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the oil pan flange.~ 4. The four piece gasket will need to be assembled to make a complete oil pan gasket. 5. Lay the oil pan gasket(s) onto the oil pan flange.~ 6. Ensure the oil pan gasket segment joints are properly aligned. 7. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the top of the oil pan gasket.~ 8. Install the oil pan. Starting from the center and working outward, tighten the oil pan bolts to 28 N·m [21 ft. lbs.].
90028872022-10-17. Service bulletin. ENGINE AND ENGINE COOLING. Part Description: Valve Body Assembly Issue Description: Valve body design was changed between 2010MY and 2011MY applications. To prevent mix matching valve bodies and solenoid packs the connectors are color coded.~ Valve bodies with a white connector can be used on 2010, 2009, 2008..., model years. Valve bodies with a gray connector can only be used on 2011, 2012, 2013..., model years.~ Solenoid packs with a white connector are used with 2010, 2009, 2008..., model years. Solenoid packs with a gray connector are used with 2011, 2012, 2013..., model years.
S21090000042022-09-26. Service bulletin. ENGINE AND ENGINE COOLING. Issue involves overheating, running hot, coolant leaks and related symptoms after a Mopar replacement engine has been installed in the vehicle.
25003142022-09-26. Service bulletin. ENGINE. Information: P207F P1C70 And SCR Inducement Strategy
S1709000010RevB2022-09-26. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:CRANK/CAMSHAFT POSITION SENSOR; UNKNOWN OR OTHER. Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear (roller failure) on one or more cam lobes and that camshaft/lifter replacement is necessary.
N350606132022-09-26. Service bulletin. ENGINE AND ENGINE COOLING; AIR BAGS. Some of the above vehicles equipped with premium tail lamps may not give the driver notification of a turn signal malfunction. This condition does not conform to Federal Motor Vehicle Safety Standard (FMVSS) No. 108 ? Lamps, Reflective Devices, and Associated Equipment.
N330606132022-09-26. Service bulletin. ENGINE AND ENGINE COOLING; AIR BAGS. Some of the above vehicles equipped with premium headlamps have headlamp shutters that may not function as intended when in the high beam mode. This condition does not conform to Federal Motor Vehicle Safety Standard (FMVSS) No. 108 - Lamps, Reflective Devices, and Associated Equipment.
90037402022-09-15. Service bulletin. ENGINE AND ENGINE COOLING. Oil Pan 2012-2017 Cummins engines with oil pan leaks, please inspect the shallow area of the oil pan for cracks. If cracks are found, please replace as necessary. Cracks are typically found above the cross member area. Please contact Chad Eichbrecht at cell (248) 309-2695 to arrange for part return or email chad.w.eichbrecht@fcagroup.com If you do not receive a response within 15 minutes, please proceed with normal repair.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.