WenmarOpen by Wenmar Pro

Service bulletins for the 2015 Ram 2500

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

519 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Wheels are shown. Show all

Bulletins, newest first
90038052022-10-31. Service bulletin. WHEELS; EQUIPMENT; POWER TRAIN. Hub & Bearing Assy - Front For issues with front wheel Hub/Bearings appearing to leak grease, do not replace the parts. Please call Paul Kuehl for further assistance, at cell (248) 535-7013. If no response in 15minutes, proceed with repair, but do not replace bearing(s) unless there is visible damage, see Service Manual Diagnostic Procedure which includes a picture of typical bearing grease weepage.
08108142022-09-26. Service bulletin. STEERING; SEATS; ENGINE AND ENGINE COOLING; WHEELS; ELECTRICAL SYSTEM. RA2 Radio Software Enhancements This bulletin involves updating the radio's software. A customer may have experience one or more of the following: Not able to change state of heated seats and/or steering wheel during stop event on Stop/Start vehicles. Touchscreen confirmation beep may be too loud (Grand Cherokee only). U0208-00 - Loss Communication With Heated Seat Control Module (Cherokee only).Improvements: Only allow vehicle settings to be changed in run mode. To help insure settings are properly saved. Always gray out text message soft keys for non-supporting devices. Voice Recognition (VR) improved accuracy.
08109142022-09-26. Service bulletin. SEATS; ENGINE AND ENGINE COOLING; STEERING; WHEELS. RG2 Or RJ2 Radio Software Enhancements This bulletin involves updating the radio's software. A customer may have experience one or more of the following: Not able to change state of heated seats and/or steering wheel during stop event on Stop/Start vehicles. Touchscreen confirmation beep may be too loud. The radio does not allow selection of the Polish language. The radio fan continually runs at high speed. Customer perception may be the radio fan is too loud.Improvements: Only allow vehicle settings to be changed in run mode. To help insure settings are properly saved. Always gray out text message soft keys for non-supporting devices. Voice Recognition (VR) improved accuracy.
553122019-07-15. Service bulletin. EQUIPMENT; WHEELS. Molding-Wheel Plane
23-044-152019-05-20. Service bulletin. STRUCTURE:BODY; WHEELS. Poor Wheel Opening Molding Adhesion To The Body This bulletin involves inspecting and if necessary, replacing the affected wheel opening molding. The customer may describe what appears to be a gap between the wheel opening molding and the body of the vehicle. Wheel opening moldings may separate at body due to insufficient adhesive bond strength (Fig. 1). Fig. 1 Wheel opening molding separation
121372018-11-26. Service bulletin. WHEELS; EQUIPMENT. Return: Molding Kit - Wheel Lip Opening

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.