WenmarOpen by Wenmar Pro

Service bulletins for the 2024 Ram 1500

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

374 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Body and frame are shown. Show all

Bulletins, newest first
91004932025-02-06. Service bulletin. ELECTRICAL SYSTEM; STRUCTURE:BODY. SWITCH AND BEZEL Front Door Before replacing the Window Switch/Mirror Switch, please follow these steps: 1.- Check for what DTC are detected and take proper steps acceding to the DTC's. 2.- Make sure all the switches are properly connected to their harness, disconnect the switch and reconnect it. 3.- Review the window Switch for any physical issue (Button stuck, broken) If after performing these steps the switch remains faulty. Follow suggested repairs per diagnostics performed.
S25230000032025-01-16. Service bulletin. STRUCTURE:BODY. Door Latch, Handle And Ajar Additional Service Information.
S25230000022025-01-10. Service bulletin. STRUCTURE:BODY; ELECTRICAL SYSTEM. Outside Exterior Mirror Power Extend And/Or Retract Is Not Fully Functional.
1019352024-12-03. Service bulletin. STRUCTURE:BODY. GLASS - BACKLITE
1019362024-12-03. Service bulletin. STRUCTURE:BODY. GLASS - BACKLITE
PDI Release: 2024_10_V12024-10-09. Other. STRUCTURE:BODY. Open and close rear glass window 2 times and check seal is not hanging or loose
S2023000024 REV.C2024-08-19. Service bulletin. STRUCTURE:BODY. Water Leak Rear Of Cab Rear Seat Or Headliner
23-004-24 REV. A2024-08-13. Service bulletin. STRUCTURE:BODY; ELECTRICAL SYSTEM. "Headlamp Condensation Clearing Procedure Some customers may report that on occasion, vehicle exterior head lamp assemblies are fogged with a light layer of condensation on the inside of the lenses."
91003992024-08-01. Service bulletin. STRUCTURE:BODY. MODULE Door Windows does not function at 100% or is completely inoperative. Check DTCs in DCM and check the component they are pointing to, depending on the case follow one of the procedures below: If DTC Door Lock/Unlock Switch Stuck is present: - check wiring between door module and lock/unlock switch, if there is no problem there, check lock/unlock switch and replace it. If DTC Lost communication with Master window switch is present: - check the window switch wiring, if there is no problem there, check the window switch and replace it. If DTCs related to window circuit control shorted and/or window lost calibration are present: - check Wiring between motor and hall sensor to Door module. If there is no problem there, check window seal and track to allow travel only within proper limits, reset module and perform window calibration, if problem continues, check window motor, and if needed, replace it. At the end of the procedure: Reset DDM/PDM and perform window calibration, if DTC goes stored, the repair is correct. If the window does not work replace DDM/PDM. ************DO NOT USE THIS PROCEDURE FOR REAR WINDOWS, REAR WINDOWS ARE NOT CONTROLED BY DDM or PDM***************
91003812024-07-04. Service bulletin. ELECTRICAL SYSTEM; STRUCTURE:BODY. Door Courtesy Mid RR Tech Tip: Clarification on Rear Door Lighting for DT Vehicles with Sales Code LB2 Dear Dealers, We want to provide clarity regarding the rear door lighting configuration for DT vehicles equipped with sales code LB2. It has come to our attention that there is some confusion regarding the number of lights on DT rear doors. 1. Background: In model year MY22 and earlier, DT rear doors were equipped with three lights. However, starting from MY23, DT rear doors are correctly built with only two lights. 3. Sales Code LB2: Vehicles with sales code LB2 are designed to have two lights on the rear doors. 4. Action Required: If a customer complains about missing rear door lights on an LB2-equipped vehicle, please do not order part number 68291943AC. LB2-equipped vehicles are correctly built with two lights, and adding a third light is unnecessary. Thank you for your attention to this matter. If you have any further questions or need assistance, feel free to reach out to our support team.
23-018-24 REV. A2024-06-07. Service bulletin. STRUCTURE:BODY. "Incorrect Floor Pan Installed Customer's vehicle may have been built with the following: ● Extra holes in floor pan under carpet. This bulletin involves covering open holes in the floor pan with butyl sealer and tape."
S24230000272024-06-05. Service bulletin. STRUCTURE:BODY; ELECTRICAL SYSTEM. Horn Sound Is Weak, Off Tone, Or Inoperative

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.