Service bulletins for the 2024 Ram 1500
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
374 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
Only bulletins with component: Throttle and cruise control are shown. Show all
| 9100354 | 2024-06-10. Service bulletin. VISIBILITY/WIPER; STEERING; VEHICLE SPEED CONTROL; ELECTRICAL SYSTEM. SWITCH Multifunction Before replacing the steering column control module (SCCM), please follow these steps: 1.- Make sure all the switches' and airbag's harness are properly connected, disconnect the switches and reconnect them, and reverify the issue. 2.- Review the SCCM for any physical issue (Autolock, clockspring damaged) 3.- Pull the SCCM fuse for 60 sec and then reinstall it. 3.- Reverify if Steering wheel switches are inoperative. If there are no DTC's, physical defects, nor switches inop, then SCCM does not need to be replaced. |
|---|---|
| 9100247 | 2023-12-18. Service bulletin. BACK OVER PREVENTION; VEHICLE SPEED CONTROL. ERG Hydraulic Tensioner Before replacing any FEAD components, please check FEAD belt layout as per the engine sales code. Customer complaint may include a noise from under the hood described as a squeal, screech, squeak, chirp or belt-related noise and/or noisy tensioner/pulley. Please refer to SOL# S2309000007. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.