WenmarOpen by Wenmar Pro

Service bulletins for the 2019 Nissan Titan

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

150 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Body and frame are shown. Show all

Bulletins, newest first
NTB09-131C2026-04-29. Service bulletin. STRUCTURE:BODY. CERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label. These items may be available from Nissan by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. · The “VIN Plate/Label” (metal plate or vinyl label) is attached to the instrument panel or body on the driver side at the base of the windshield (see Figure 1). · The “Certification Label” (vinyl adhesive label) is located on the lower area of the driver side B-Pillar (see Figure 1).
NTB09-131C2026-04-29. Service bulletin. STRUCTURE:BODY. CERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label. These items may be available from Nissan by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. · The “VIN Plate/Label” (metal plate or vinyl label) is attached to the instrument panel or body on the driver side at the base of the windshield (see Figure 1). · The “Certification Label” (vinyl adhesive label) is located on the lower area of the driver side B-Pillar (see Figure 1).
NTB24-0632025-02-10. Emissions. STRUCTURE:BODY. VOLUNTARY EMISSIONS RECALL CAMPAIGN 2016-2019 TITAN XD DIESEL; VEHICLE EMISSION CONTROL INFORMATION LABEL INTRODUCTION Nissan is conducting this voluntary emissions recall campaign on certain specific model year 2016-2019 Titan XD vehicles with Diesel engines to inspect and, if necessary, replace the Vehicle Emission Control Information Label. This service will be performed at no charge to the customer for parts or labor. IDENTIFICATION NUMBER Nissan has assigned identification number PD127 to this campaign. This number must appear on all communication and documentation of any nature dealing with this campaign. DEALER RESPONSIBILITY It is the dealer’s responsibility to check Service COMM or Dealer Business Systems (DBS) National Service History for the campaign status on each vehicle falling within the range of this voluntary emissions recall which for any reason enters the service department. This includes vehicles purchased from private parties or presented by transient (tourist) owners and vehicles in a dealer’s inventory. Federal law requires that new vehicles in dealer inventory which are the subject of a safety recall must be corrected prior to sale. Failure to do so can result in civil penalties by the National Highway Traffic Safety Administration. While federal law applies only to new vehicles, Nissan strongly encourages dealers to correct any used vehicles in their inventory before they are retailed.
NTB18-028B2023-05-05. Service bulletin. STRUCTURE. RUNNING BOARD PROTECTIVE FILM RESIDUE This bulletin is no longer active. Please discard previous versions of NTB18-028.
NTB17-010B2023-05-05. Service bulletin. STRUCTURE. STEP RAIL END CAP CHROME TRIM AVAILABLE AS SEPARATE PART This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB20-010C2023-03-07. Service bulletin. VISIBILITY; STRUCTURE. WINDSHIELD WIPER BLADE PERFORMANCE/DIAGNOSIS SERVICE INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB13-028H2023-03-07. Service bulletin. VISIBILITY; STRUCTURE. REMOVING FOREIGN MATERIAL FROM THE WINDOW GLASS This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB09-081J2023-03-07. Service bulletin. VISIBILITY; STRUCTURE. WINDSHIELD CRACKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB20-0582020-09-11. Service bulletin. STRUCTURE:BODY:BUMPERS; BACK OVER PREVENTION; ELECTRICAL SYSTEM:ADAS:PARKING ASSIST:SENSORS. 2016-2019 TITAN/TITAN XD; REAR SONAR SENSORS DO NOT DETECT OBJECTS/OBSTRUCTIONS WHEN IN REVERSE IF YOU CONFIRM The rear parking aid sensors are inoperative or operating incorrectly, And Damage has occurred to the rear sonar sensors or harness by road debris from the rear wheels. ACTION Install the rear sonar sensor protector kit, listed in the PARTS INFORMATION on page 7, to the rear bumper. NOTE: This bulletin does not cover any damage that has occurred to the rear sonar sensors or harness. Refer to the Electronic Service Manual (ESM) for component repair.
NTB19-1022019-12-06. Service bulletin. EQUIPMENT; VISIBILITY; STRUCTURE:BODY:DOOR. 2017-2019 TITAN/TITAN XD KING CAB; WIND NOISE AT 40 MPH AND ABOVE IF YOU CONFIRM A wind noise coming from the front door area that has the following characteristics: • - Occurs at 40 mph and above. • - The wind noise is heard from the left and/or right side of the vehicle. • - The wind noise may be heard near the rear edge of the front door window or near the front edge of the rear door window. ACTION Replace the sash moldings on both sides of the vehicle with the parts listed in PARTS INFORMATION on the last page of this bulletin.
NTB19-0342019-05-20. Service bulletin. STRUCTURE. 2018-2019 TITAN XD; WHISTLE NOISE FROM VEHICLE FRONT AT 60 MPH AND ABOVE IF YOU CONFIRM A whistle type noise heard from the vehicle front at speeds of 60 MPH and above. ACTION 1. Confirm the source of the whistle noise by referring to steps 1 and 2 of the SERVICE PROCEDURE on the next page. 2. If the whistle noise stops after applying the tape, replace the grille-to-hood seal with the new one listed in the PARTS INFORMATION on the last page of this bulletin. 3. Ensure the hood is adjusted correctly.
NTB18-0712018-11-26. Service bulletin. ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:CONTROL MODULE; EQUIPMENT:ELECTRICAL:ANTI-THEFT DEVICES; STRUCTURE:BODY:DOOR. SECURITY ALARM SOUNDS AFTER USING MECHANICAL KEY TO UNLOCK DRIVER DOOR SERVICE INFORMATION Applied Vehicles listed above are no longer equipped with a door unlock sensor and/or Body Control Module (BCM) software to provide support for the door unlock sensor. Normal Functionality For Vehicles Built Without Door Unlock Sensor And/Or BCM Software To Support Door Unlock Sensor For Applied Vehicles built after the Applied Dates listed on page 1, using the mechanical key on the driver door will operate differently than vehicles built before the Applied Dates. For these later models, the BCM will not recognize operation of the mechanical key. If a mechanical key is used to lock the driver door: - The security system will not set. If the vehicle is broken into, the alarm will not sound. - Only the driver door will be locked. Other doors will not lock using the mechanical key. If a mechanical key is used to unlock the driver door: - Only the driver door will be unlocked. Other doors will not be unlocked. - If the security system is set, when the door is opened the alarm will sound. NOTE: Using the Unlock button on the Intelligent Key, pushing the request switch on the driver or passenger door with the Intelligent Key in range, or using the Intelligent Key to start the vehicle will silence the alarm. The mechanical key will not operate the power windows.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.