Service bulletins for the 2023 Nissan Frontier
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
82 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
| NTB20-029F | 2022-11-12. Service bulletin. ELECTRICAL SYSTEM. TELEMATICS (IVC) SERVICE INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Discard all previous versions of this bulletin. |
|---|---|
| NTB22-087 | 2022-10-07. Service bulletin. POWER TRAIN. NOISE AND/OR VIBRATION FROM FRONT OR REAR PROPELLER SHAFT SERVICE INFORMATION If you confirm abnormal noise and/or vibration is coming from the front or rear propeller shaft of an APPLIED VEHICLE, inspect the propeller shaft journals (U-Joints) for binding and/or abnormal noise before replacing the propeller shaft. If binding and/or abnormal noise is confirmed from the propeller shaft U-Joints, replace the propeller shaft U-Joints. Refer to the ESM for the propeller shaft U-Joint replacement procedure. NOTE: Replacement of the propeller shaft due to noise and/or vibration caused by the propeller shaft U-Joints may result in warranty charge back. |
| NTB22-084 | 2022-10-07. Service bulletin. ELECTRICAL SYSTEM; EXTERIOR LIGHTING. DTC C1116 AND/OR C1142 STORED IN THE ABS CONTROL MODULE IF YOU CONFIRM Customer states the ABS warning light is ON and “System fault See Owner’s Manual” appears in the message center (Figure 1), AND DTCs C1116 (Stop Lamp Switch) and/or C1142 (Press Sen Circuit) are stored in the ABS Control Module. ACTION Follow the SERVICE PROCEDURE in this bulletin to: 1. Install the Center High Mount Stop Lamp (CHMSL) Relay and Jumper Harness. 2. Install a new Stop Lamp Switch. 3. Reprogram the ABS Control Module. IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair. |
| NTB12-055I | 2022-10-07. Service bulletin. POWER TRAIN. CLICKING NOISE FROM FRONT OR REAR AXLE DURING TAKE-OFF/ACCELERATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| REVISION 2 PC916 | 2022-09-17. Service bulletin. POWER TRAIN. Automatic Transmission REVISED September 2, 2022 Please discard earlier versions of this bulletin. The announcement from August 29, 2022 has been revised to include the following: • Affected population added • SERVICE COMM activation date added • Frequently Asked Questions (FAQ) section added • Campaign ID added |
| REVISION 1 2020- | 2022-08-31. Service bulletin. POWER TRAIN. Automatic Transmission REVISED August 29, 2022 Please discard earlier versions of this bulletin. The announcement from August 25, 2022 has been revised to include the following: • This Quality Assurance Hold has been amended to include all 2023 Nissan Z vehicles equipped with automatic transmission. |
| NTB22-075 | 2022-08-31. Service bulletin. SEATS. DRIVER’S POWER SEAT RECLINES UNINTENTIONALLY SERVICE INFORMATION Refer to the information in this bulletin when diagnosing a customer concern of the driver’s (LH) power seat recline position changing unintentionally on a 2022-2023 Frontier. Not all customer concerns mean there are broken or malfunctioning parts. Use this information to help explain normal operation to the vehicle owner. The driver’s seat recline switch (Figure 1) can be bumped when exiting/entering the vehicle (Figure 2), resulting in unintentional recline of the seat upper. Do not replace the side finisher/switch unless visible damage to the seat switch is present. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.