Recalls that may apply to the 2006 Nissan Altima
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
By component
| 07V527000 | 2007-11-14. ENGINE AND ENGINE COOLING. ON CERTAIN PASSENGER VEHICLES EQUIPPED WITH A 2.5L ENGINE, THE CRANKSHAFT POSITION SENSOR CAN OVERHEAT CAUSING A BRIEF INTERRUPTION IN THE SIGNAL OUTPUT FROM THE SENSOR. Built 2004-01-24 to 2006-10-23. |
|---|---|
| 06V223000 | 2006-06-21. ENGINE AND ENGINE COOLING. CERTAIN PASSENGER VEHICLES EQUIPPED WITH 2.5L ENGINES MAY EXPERIENCE EXCESSIVE ENGINE OIL CONSUMPTION AS A RESULT OF IMPROPER PERFORMANCE OF THE PISTON RINGS. Built 2006-01-01 to 2006-05-31. |
| 06V046000 | 2006-02-13. SUSPENSION:REAR. ON CERTAIN VEHICLES, THE REAR SUBFRAME MAY HAVE BEEN MANUFACTURED INCORRECTLY, WHICH COULD RESULT IN A CRACK IN A BRACKET WHICH HOLDS PART OF THE REAR SUSPENSION. Built 2006-01-24 to 2006-01-27. |
| 2007364 | 2007-11-13. Engine. On certain vehicles equipped with a 2.5L engine, the crank angle sensor can malfunction causing the engine to stall. Engine stalling would result in lost propulsion which, in conjunction with traffic and road conditions, and the driver's reactions, could increase the risk of a crash. Correction: Dealers will reprogram the Electronic Control Module (ECM) to prevent stalling. |
|---|---|
| 2006155 | 2006-06-29. Engine. Certain vehicles equipped with a four cylinder 2.5L engine may exhibit excessive oil consumption as a result of improper piston rings. If the oil level is not maintained engine damage can occur and could result in an engine fire. Correction: Dealers will reprogram the Engine Control Module (ECM) and, if required, replace the engine. |
| 2006040 | 2006-02-13. Suspension. The die used for stamping the rear suspension subframe was out of specification during three days of production. As a result, the thickness of the attachment bracket for the rear lower link may be less than the minimum specification. This could result in a crack forming in the attachment bracket. If a crack propagates through the bracket, the rear lower link may separate from the bracket. Under certain severe driving conditions, stability of the vehicle may be compromised, leading to a loss of vehicle control. Correction: Dealers will inspect and, if required, replace the rear suspension subframe. |
A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.