WenmarOpen by Wenmar Pro

Recalls that may apply to the 2001 Mitsubishi Fuso FE649

A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.

By component

United States: NHTSA, as of 2026-10-19
08V2240002008-05-16. POWER TRAIN:AUTOMATIC TRANSMISSION. MITSUBISHI FUSO IS RECALLING 15,549 MY 1999-2004 FE639, FE649, AND FG639 TRUCKS; MY 2001-2004 FE640, AND MY 2003-2004 FH210 TRUCKS EQUIPPED WITH AUTOMATIC TRANSMISSIONS. NORMAL HEAT EMANATING FROM THE EXHAUST PIPE MAY CAUSE THE AUTOMATIC TRANSMISSION SHIFT LINKAGE TO DEFORM. THE EFFORT REQUIRED TO OPERATE THE AUTOMATIC TRANSMISSION SHIFT CONTROL LEVER MAY INCREASE IF THE LINKAGE BINDS DUE TO THE DEFORMATION. Built 1998-02-27 to 2004-01-05.
08V2210002008-05-15. ENGINE AND ENGINE COOLING. MITSUBISHI FUSO IS RECALLING 10,325 MY 1999-2004 FE639 AND FE649 TRUCKS. THE REAR ENGINE SUPPORT BRACKET IS COMPOSED OF MATERIALS OF INSUFFICIENT STRENGTH. NORMAL VEHICLE VIBRATIONS MAY CAUSE THE BRACKET TO CRACK. Built 1998-02-27 to 2004-01-05.
05V3040002005-06-29. POWER TRAIN:AUTOMATIC TRANSMISSION:LEVER AND LINKAGE:FLOOR SHIFT. ON CERTAIN MEDIUM DUTY TRUCKS, RUST BUILD-UP ON THE AUTOMATIC TRANSMISSION (A/T) SHIFT LINKAGE MAY CAUSE THE LINKAGE TO BIND. RUST BUILD-UP IS ACCELERATED IN GEOGRAPHIC LOCATIONS THAT ARE SITUATED NEAR LARGE BODIES OF SALT WATER, OR IN REGIONS WITH HEAVY SNOW/ICE MELTING COMPOUND USAGE IN WINTER MONTHS. Built 1998-02-27 to 2004-01-05.
05V3030002005-06-29. ENGINE AND ENGINE COOLING. ON CERTAIN MEDIUM DUTY TRUCKS, THE REAR ENGINE SUPPORT BRACKET IS COMPOSED OF MATERIALS OF INSUFFICIENT STRENGTH. NORMAL VEHICLE VIBRATIONS MAY CAUSE THE BRACKET TO CRACK. Built 1998-02-27 to 2004-01-05.
04V5710002004-12-03. PARKING BRAKE:CONVENTIONAL:MECHANICAL:LINKAGE AND CABLE. ON CERTAIN TRUCKS, THE CABLE END OF THE PARKING BRAKE CABLE, WHERE IT ATTACHES TO THE PARKING BRAKE LEVER, IS DESIGNED IMPROPERLY. REPEATED NORMAL PARKING BRAKE OPERATION MAY CAUSE THE CABLE END TO BECOME IMPROPERLY SEATED IN THE PARKING BRAKE LEVER GROOVE. Built 1995-02-21 to 2001-02-22.
Canada: Transport Canada, as of 2026-10-19
20081722008-05-15. Engine. On certain vehicles, normal heat emanating from the exhaust pipe may cause the shift linkage installed as part of campaign 2005194 (C1003610) to bind. As a result, the effort required to operate the automatic transmission shift control lever may increase. In the worst case, the shift control lever may become inoperative, or the transmission gear position indicated on the shift lever housing may not match the actual gear selection at the transmission. Correction: Dealers will install a modified shift control lever assembly.
20081712008-05-15. Engine. On certain vehicles, the rear engine support bracket is composed of materials of insufficient strength. Normal vehicle vibrations may cause the bracket to crack. If the vehicle is continually operated in this condition, the bracket may break apart. In the worst case, the transmission could drop out of alignment with the driver train. Correction: Dealers will install a modified rear engine support bracket.
20051952005-06-29. Engine. On certain vehicles, the rear engine support bracket is composed of materials of insufficient strength. Normal vehicle vibrations may cause the bracket to crack. If the vehicle is continually operated in this condition, the bracket may break apart. In the worst case, the transmission could drop out of alignment with the driver train. Correction: Dealers will install a modified rear engine support bracket.
20051942005-06-29. Powertrain. On certain vehicles, rust build-up on the automatic transmission shift linkage, due to an insufficient corrosion inhibiting ability, may cause the linkage the bind. As a result, the effort required to operate the shift control lever may increase. In the worst case, the shift control lever may become inoperative, or the transmission gear position indicated on the shift lever housing may not match the actual gear selection at the transmission. Correction: Dealers will install a modified shift control lever assembly. Note: This recall is superseded by recall 2008172.
20043722004-10-14. Brakes. On certain vehicles, the cable end of the parking brake cable, where it attaches to the parking brake lever, is designed improperly. Repeated normal parking brake operation may cause the cable end to become improperly seated in the parking brake lever groove. In this condition, the parking brake cable may bend and/or break due to fatigue. In the worst case, the parking brake may become inoperative. Correction: Dealers will inspect and, if necessary, replace the parking brake cable assembly.

A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.

Check one vehicle officially

Contains information licensed under the Open Government Licence – Canada.