WenmarOpen by Wenmar Pro

Recalls that may apply to the 1995 Mercury Mystique

A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.

By component

United States: NHTSA, as of 2026-10-19
00V3670002000-11-06. ENGINE AND ENGINE COOLING. VEHICLE DESCRIPTION: 1995 PASSENGER VEHICLES EQUIPPED WITH THE 2.0L AND 2.5L ENGINES, AND 1996 VEHICLES EQUIPPED WITH 2.5L ENGINES. TIGHTENING OF THE ENGINE COOLING FAN MOTOR BEARINGS, UP TO AND INCLUDING MOTOR STALL, CAN RESULT IN INCREASED MOTOR TORQUE AND HIGHER THAN NORMAL MOTOR CURRENT AND ACCOMPANYING HIGH MOTOR TEMPERATURES. Built 1994-04-18 to 1995-12-29.
98V2330001998-09-18. POWER TRAIN:AUTOMATIC TRANSMISSION:LEVER AND LINKAGE:FLOOR SHIFT. VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE FLOOR SHIFT AUTOMATIC TRANSMISSION CONTROL CAN BE DAMAGED IF SUBJECTED TO CERTAIN INTERIOR CLEANING PRODUCTS. THE GEAR POSITION INDICATOR CAN DETERIORATE AND NOT CORRECTLY INDICATE THE ACTUAL GEAR POSITION. Built 1994-07-18 to 1998-01-12.
97V2250001997-12-08. VEHICLE SPEED CONTROL:CABLES. VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH THE TRACTION CONTROL OPTION. THE THROTTLE CABLES WERE DAMAGED DURING VEHICLE ASSEMBLY LEADING TO FRAYING OR SEPARATION OF THE THROTTLE CABLE. Built 1994-04-18 to 1996-08-15.
95V2320001995-12-05. FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP. THE FUEL TANK FILLER PIPE OPENING REINFORCEMENT, CONSTRUCTED FROM TWO SEPARATELY MOLDED PIECES, CAN LEAK AT THE WELD. Built 1994-07-01 to 1995-04-01.
95V2280001995-12-04. SEAT BELTS:FRONT:ANCHORAGE. CRACKS HAVE BEEN FOUND IN THE FRONT SAFETY BELT OUTBOARD ANCHOR TABS DUE TO A COMBINATION OF HYDROGEN EMBRITTLEMENT OF THE TAB AND STRESS INTRODUCED DURING ATTACHMENT OF THE ANCHOR TAB TO THE SEAT FRAME. THIS DOES NOT CONFORM WITH THE REQUIREMENTS OF FMVSS NO. 210, "SEAT BELT ASSEMBLY ANCHORAGES." Built 1994-07-01 to 1995-05-01.
95V0090001995-01-24. VISIBILITY:WINDSHIELD. THE GLASS TEMPERING PROCESS ON THE RIGHT HAND REAR DOOR WINDOWS WAS NOT CORRECTLY PERFORMED. THIS DOES NOT MEET THE REQUIREMENTS OF FMVSS NO. 205, "GLAZING MATERIALS." Built 1994-11-01 to 1994-11-01.
94V2030001994-10-18. FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP. THE FUEL TANK FILLER PIPE OPENING REINFORCEMENT CAN LEAK AT THE WELD. Built 1994-07-01 to 1994-10-01.
94V1840001994-09-29. FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP. A METAL SHIELD ON THE OUTSIDE OF THE PLASTIC FUEL FILLER PIPE CAN DEVELOP A STATIC ELECTRICAL CHARGE DURING REFUELING OF THE VEHICLE. Built 1994-07-01 to 1994-09-01.
Canada: Transport Canada, as of 2026-10-19
20002842000-11-29. Electrical. On certain vehicles equipped with 2.5 litre V6 engines, tightening of the engine cooling fan motor bearings, up to and including motor stall, can result in increased motor torque and higher than normal motor current and accompanying high motor temperatures. Overheating of the cooling fan motor due to excessive current can result in smoke and odors from bearing grease, insulation and other internal motor components. If electrical current continues to be applied to the motor, internal motor components could ignite possibly igniting other engine compartment components. Correction: Dealers will install a Positive Temperature Coefficient device (a solid state resettable fuse-like device) in-line with each fan motor.
19982081998-10-21. Powertrain. On certain vehicles, the floor shift automatic transmission control may be damaged if subjected to certain vehicle interior cleaning products. If exposed to these products, the transmission gear position indicator may deteriorate and not correctly indicate the actual gear position. If this occurs, the shifter will continue to operate normally, but there is the potential for incorrect gear selection. Correction: Automatic transmission floor shift control will be replaced.
19981031998-05-20. Emissions. NOTE: VEHICLES EQUIPPED WITH 2.5 LITRE ENGINES. THESE VEHICLES MAY NOT COMPLY WITH C.M.V.S.S. 1103 - EXHAUST EMISSIONS. PREMATURE FAILURE OF THE CATALYST SUBSTRATE MATERIAL IN THE CATALYST AND EXHAUST MANIFOLD ASSEMBLIES (LIGHT-OFF CATALYSTS) CAN RESULT IN RESTRICTED EXHAUST GAS FLOW, LOSS OF POWER AND EXHAUST EMISSION LEVELS IN EXCESS OF THOSE SPECIFIED IN THE STANDARD. CORRECTION: LEFT AND RIGHT HAND LIGHT-OFF CATALYSTS WILL BE REPLACED. UNDERBODY CATALYST WILL BE INSPECTED AND REPLACED IF NECESSARY.
19972211997-12-11. Engine. NOTE: ONLY VEHICLES EQUIPPED WITH THE TRACTION CONTROL OPTION ARE INVOLVED. THE THROTTLE CABLES ON THESE VEHICLES MAY HAVE BEEN DAMAGED DURING VEHICLE ASSEMBLY. THIS MAY LEAD TO FRAYING OR SEPARATION OF THE THROTTLE CABLE, WHICH COULD PREVENT THE ENGINE FROM RETURNING TO IDLE. THIS COULD ADVERSELY AFFECT VEHICLE CONTROL. CORRECTION: THROTTLE CABLE WILL BE REPLACED WITH A REVISED DESIGN VERSION.
19960031996-01-09. Seats And Restraints. THESE VEHICLES MAY NOT COMPLY WITH THE REQUIREMENTS OF C.M.V.S.S 210 - SEAT BELT ASSEMBLY ANCHORAGES. THE HARDWARE THAT ATTACHES THE OUTBOARD ENDS OF THE FRONT SAFETY BELTS TO THE FRONT SEAT FRAMES MAY BE CRACKED OR FRACTURED. IF SO. THE LOAD THAT THE SAFETY BELT COULD SUSTAIN WOULD BE BELOW THAT SPECIFIED BY THE STANDARD. CORRECTION: REINFORCEMENT PLATES WILL BE INSTALLED TO THE ATTACHMENT HARDWARE OF BOTH OUTBOARD FRONT SAFETY BELTS. IF THE ATTACHMENT HARDWARE IS FRACTURED, A NEW SAFETY BELT WILL BE INSTALLED.
19960021996-01-09. Fuel System. THE FUEL TANK FILLER PIPE OPENING REINFORCEMENT, FABRICATED FROM TWO SEPARATELY MOULDED PIECES SPIN WELDED TOGETHER, MAY EVENTUALLY LEAK FUEL AT THE WELD JOINT. FUEL LEAKAGE IN THE PRESENCE OF AN IGNITION SOURCE, COULD POTENTIALLY RESULT IN A FIRE. CORRECTION: FUEL TANK ASSEMBLIES WILL BE REPLACED WITH ONES CONTAINING ONE PIECE MOULDED REINFORCEMENTS.
19951111995-06-16. Emissions. DEFECT: THESE VEHICLES DO NOT COMPLY WITH C.M.V.S.S. 1103 - EXHAUST EMISSIONS. CORRECTION: POWERTRAIN CONTROL MODULE WILL BE REPLACED ON AFFECTED VEHICLES.
19950321995-02-21. Seats And Restraints. THE PASSENGER SIDE SUPPLEMENTAL RESTRAINT SYSTEM (AIR BAG) MAY HAVE A CRACKED INFLATOR BODY. IF THE VEHICLE IS INVOLVED IN A DEPLOYMENT LEVEL CRASH, THE PASSENGER SIDE AIR BAG MAY NOT INFLATE PROPERLY WHICH COULD RESULT IN REDUCED OCCUPANT PROTECTION. IN ADDITION, THE IGNITER PLUG COULD SEPARATE FROM THE INFLATOR, WHICH COULD RESULT IN THE RELEASE OF HOT GASES AND COULD IGNITE FLAMMABLE MATERIAL OR POTENTIALLY CAUSE PERSONAL INJURY. CORRECTION: VEHICLES WILL BE INSPECTED AND A NEW PASSENGER SIDE AIR BAG MODULE WILL BE INSTALLED IF NECESSARY.
19950241995-02-16. Visual System. THESE VEHICLES DO NOT COMPLY WITH C.M.V.S.S. 205 - GLAZING MATERIALS. IMPROPERLY TEMPERED GLASS WAS INSTALLED IN THE RIGHT HAND REAR DOOR. CORRECTION: RIGHT HAND REAR DOOR GLASS WILL BE REPLACED ON AFFECTED VEHICLES.
19941581994-10-17. Fuel System. THE FUEL FILLER OPENING REINFORCEMENT (AN INTEGRAL PART OF THE FUEL TANK ASSEMBLY) MAY LEAK FUEL. IN THE PRESENCE OF AN IGNITION SOURCE, A FIRE COULD RESULT. CORRECTION: FUEL TANK WILL BE REPLACED ON AFFECTED VEHICLES.

A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.

Check one vehicle officially

Contains information licensed under the Open Government Licence – Canada.