WenmarOpen by Wenmar Pro

Service bulletins for the 2023 Mazda Mazda3

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

329 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Bulletins, newest first
SA-037-23a2023-09-03. Service bulletin. ENGINE AND ENGINE COOLING. A new cylinder head assembly for service parts has been newly established for SKYACTIV-G 2.5 with cylinder deactivation when replacement is needed. Valves, valve springs, valve spring seats, and cotters (IN/EX) are included in the new assembly. Dealers can now utilize the Limited Parts Ordering (LPO) page on eMDCS to order the repair parts for 2.5L (with cylinder deactivation) and 2.5L turbo cylinder head repairs. Hotline and MASH authorization is not required to order parts for performing this repair. If there are any questions on part ordering or part status, contact the DAG group for assistance.
01-010-232023-09-03. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ENGINE AND ENGINE COOLING. Some customers may complain about engine surging 100-200 rpm when accelerating up a hill at altitudes around 6,700 feet or higher. This concern may be caused by improper PCM control software in particular situations.
SA-039-232023-08-05. Service bulletin. STRUCTURE. Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
SA-027-23b2023-08-05. Service bulletin. ELECTRICAL SYSTEM. Some customers may experience the following: In-Vehicle Network Malfunction error message, Master Warning light ON, Connected Vehicle Reception Icon shows "X".
SA-042-232023-08-05. Service bulletin. EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM). Some customers may complain about the Active Driving Display not displaying turn by turn (TBT) travel direction or navigation information.
SA-009-23F2023-08-05. Service bulletin. LATCHES/LOCKS/LINKAGES; EXTERIOR LIGHTING; EQUIPMENT:ELECTRICAL:INFOTAINMENT; ENGINE AND ENGINE COOLING. Some customers may complain about any of the following: 1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App Connected Vehicle enrollment. 2. Remote function(s) inoperative. Engine Start / Stop Door Lock / Unlock Lights ON / OFF 3. MAZDA CONNECT connected vehicle reception strength icon shows "X" or " ".
16-006-232023-08-03. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM. Updated software release for concerns with MAZDA CONNECT infotainment system. Some vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (Ver. 7000C0A-NA06_12018 or later).
09-012-23b2023-08-03. Service bulletin. SEATS; ELECTRICAL SYSTEM. Some customers may complain that the seat warmer does not operate when turning the ignition on while the seat is warm but when turning the ignition off then on again, the seat warmer begins to operate appropriately. DTCs B1030:13 and/or B1032:13 are stored. This is caused by the seat warmers fail-safe mode which prevents it from working during the initial drive cycle. To correct this issue, the seat warmer has been modified to optimize the temperature control. B1030:13 Seat warmer unit (LH) circuit malfunction (Heater side) B1032:13 Seat warmer unit (RH) circuit malfunction (Heater side)
08-003-23a2023-08-03. Service bulletin. AIR BAGS. Some vehicles may exhibit that the air bag warning light turns on or repeats cycles of turning on and off with DTC B1126:13 and/or B1127:13 stored in memory. B1126:13 - Driver-side side air bag module circuit open circuit or resistance high B1127:13 - Passenger-side side air bag module circuit open circuit or resistance high This issue is caused by any of the following: When the driver or passenger moves, a load is applied to the seat back and the load may cause displacement of the mating terminals in the side air bag module connector, resulting in insufficient contact and higher resistance. The DTC detection level is too sensitive. The form of the female terminals in the side air bag module connector may cause insufficient contact and higher resistance. To eliminate these concerns, (1) the DTC detection level of the SAS control module has been optimized, (2) the design of the side air bag module connector has been modified, and (3) the layout of the side air bag module connector has been modified.
SA-037-232023-07-05. Service bulletin. ENGINE AND ENGINE COOLING. A new cylinder head assembly for service parts has been newly established for SKYACTIV-G 2.5 with cylinder deactivation when replacement is needed. Valves, valve springs, valve spring seats, and cotters (IN/EX) are included in the new assembly. Dealers can now utilize the Limited Parts Ordering (LPO) page on eMDCS to order the repair parts for 2.5L (with cylinder deactivation) and 2.5L turbo cylinder head repairs. Hotline and MASH authorization is not required to order parts for performing this repair. If there are any questions on part ordering or part status, contact the DAG group for assistance.
SA-036-232023-07-05. Service bulletin. STRUCTURE; EQUIPMENT. Interior parts made of resin have antistatic coating to prevent dust from sticking on the surfaces, and depending on the conditions of use, the antistatic components may crystallize slightly, giving an appearance of white stains on the surface. To remove the stains, wipe the stained surface with a towel soaked with water mixed with a small portion of a neutral detergent. If the white stains reappear again, simply wipe them again in the same way. NOTE: The antistatic effect does not deteriorate with this procedure.
SA-027-23a2023-07-05. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM. IN-VEHICLE NETWORK MALFUNCTION AND MASTER WARNING LIGHT ON. DTC U3000:04 STORED (DOES NOT APPLY TO 09-001/23)
SA-015-23d2023-07-05. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; ENGINE AND ENGINE COOLING. Connected Services, Frequently Asked Questions (FAQ)
SA-009-23e2023-07-05. Service bulletin. ENGINE AND ENGINE COOLING; EXTERIOR LIGHTING; LATCHES/LOCKS/LINKAGES; STRUCTURE. Some customers may complain about any of the following: 1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App Connected Vehicle enrollment. 2. Remote function(s) inoperative. Engine Start / Stop Door Lock / Unlock Lights ON / OFF 3. MAZDA CONNECT connected vehicle reception strength icon shows "X" or " ".
SA-008-23a2023-07-05. Service bulletin. TIRES; WHEELS. Some vehicles may exhibit a steering shimmy or body vibration during the PDI test drive or during the first few miles of driving after the vehicle has been delivered to the customer due to flat spots on the tires. Flat spots on tires may be caused by improper maintenance during dealer storage (e.g.: Vehicle was left stationary for a prolonged period of time in high ambient temperatures).
09-024-232023-07-05. Service bulletin. ELECTRICAL SYSTEM; LATCHES/LOCKS/LINKAGES. Some customers may experience that the out-of-area (reception area) type auto lock function sometimes fails. When the front door is being closed with a hand touching one or both of the touch sensors on the front outer handle, the out-of-area (reception area) type auto lock function may fail. Control software of the LF control unit (LFU) has been modified.
09-007-23b2023-07-05. Service bulletin. SEATS. At PDI or when new vehicle is delivered, some customers may complain about wrinkles on the leather seat cushion and/or seat back surface.
SA-032-232023-06-04. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING. If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices.
SA-031-232023-06-04. Service bulletin. WHEELS. Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under the clear coating. The damaged area has the appearance of dark stains or discoloration.
SA-015-23c2023-06-04. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. Frequently Asked Questions (FAQ)
SA-009-23d2023-06-04. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT:ELECTRICAL:INFOTAINMENT; ENGINE AND ENGINE COOLING. Some customers may complain about any of the following:1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App Connected Vehicle enrollment. 2. Remote function(s) inoperative. Engine Start / Stop, Door Lock / Unlock, Lights ON / OFF, 3. MAZDA CONNECT connected vehicle reception strength icon shows "X" or " ".
SA-005-23a2023-06-04. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; ELECTRICAL SYSTEM. Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.
09-021-232023-06-04. Service bulletin. VISIBILITY:GLASS, SIDE/REAR; STRUCTURE. Some vehicles may experience a gap between the glass and the rear door glass run-channel due to run-channel deformation. This causes poor appearance and wind noise when driving at high speed. This concern is due to the incorrect shape of the glass run-channel.
09-018-23a2023-06-04. Service bulletin. VISIBILITY:GLASS, SIDE/REAR; STRUCTURE. Some vehicles may exhibit the glass run channel of the front door interfering with the rear door garnish. This is caused by the front door glass run channel not being fixed strongly enough to the door for the following situations where the cycles of door operation may result in interference and lead to damage on the rear door garnish. When the front door glass is closed, the glass run channel may be forced to move to the B pillar side. During very hot weather, the glass run channel may expand to the B pillar side. To eliminate this concern, the design of the front door glass run channel has been changed to be fixed stronger to the door.
08-003-232023-06-04. Service bulletin. AIR BAGS. Some vehicles may exhibit that the air bag warning light turns on or repeats cycles of turning on and off with DTC B1126:13 and/or B1127:13 stored in memory.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.