WenmarOpen by Wenmar Pro

Service bulletins for the 2020 Mazda Mazda3

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

726 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Instrument cluster are shown. Show all

Bulletins, newest first
SA-050-232023-09-05. Service bulletin. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. Some customers may complain about scratches on the instrument cluster lens.
09-020-232023-05-03. Service bulletin. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; EQUIPMENT. Some customers may notice white lines appearing across the instrument cluster (as shown below). The white lines may be caused during the production process where poor contact occurs at the internal LCD terminals.
07-002-232023-03-03. Service bulletin. ELECTRICAL SYSTEM; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. Some customers may complain that the ambient temperature on the instrument cluster is displayed more than 50 °F (10°C) lower than the actual temperature, resulting in insufficient performance of the air conditioning. This is caused by inappropriate soldering in the ambient temperature sensor. To eliminate this concern, the soldering process has been enhanced since December 2021 at the supplier.
SA-039-222022-07-06. Service bulletin. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; EQUIPMENT; UNKNOWN OR OTHER. Some customers may complain about scratches on the instrument cluster lens.
SA-013-21h2022-01-06. Service bulletin. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; EQUIPMENT; ELECTRICAL SYSTEM. Connected Vehicle Symptom Troubleshooting: Some customers may complain about any of the following: - Infotainment Center Display does not provide the Authorization Code during the MyMazda App Connected Vehicle enrollment. - Remote function(s) inoperative. o Engine Start / Stop o Door Lock / Unlock o Lights ON / OFF MAZDA CONNECT connected vehicle reception strength icon shows "X" or " ". Confirm the customer's phone and vehicle have good to strong reception during the concern as shown in the table below. - If the reception is weak, move the vehicle to a location where the reception is good to strong as shown in the table, then try to get the Authorization Code and/or operate the remote functions before proceeding to the Repair Procedure if there is still an issue. - If the reception is good to strong, proceed to the Repair Procedure.
09-018-20-3690a2020-11-04. Service bulletin. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. Some customers may notice white lines appearing across the instrument cluster (as shown below). The white lines may be caused during the production process where poor contact occurs at the internal LCD terminals.
SA-029-20e2020-07-03. Service bulletin. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; EQUIPMENT:ELECTRICAL; ELECTRICAL SYSTEM. Some customers may experience a "IN-VEHICLE NETWORK MALFUNCTION" warning message in the instrument cluster with one or more of the following DTC's stored:• B119F:01 TCU - Tel antenna No. 1 malfunction • B119F:13 (TCU - TEL antenna No.1 circuit malfunction) • B119F:2B (CMU - GPS antenna signal circuit malfunction) • B1252:87 TCU - Communication error with connectivity master unit (CMU) • U0156:00 VCM - communication error with connectivity master unit (CMU) • U0156:00 BCM - Communication error with connectivity master unit (CMU) • U0198:00 BCM - Communication error with emergency call unit • U212D:00 BCM - Communication error with light control module (RH) • U3000:00 TCU - Telematics communication unit internal malfunction • Low Voltage Battery DTCs
SA-029-20d2020-07-03. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT:ELECTRICAL; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. Some customers may experience a "IN-VEHICLE NETWORK MALFUNCTION" warning message in the instrument cluster with one or more of the following DTC's stored:• B119F:01 TCU - Tel antenna No. 1 malfunction • B119F:13 (TCU - TEL antenna No.1 circuit malfunction) • B119F:2B (CMU - GPS antenna signal circuit malfunction) • B1252:87 TCU - Communication error with connectivity master unit (CMU) • U0156:00 VCM - communication error with connectivity master unit (CMU) • U0156:00 BCM - Communication error with connectivity master unit (CMU) • U0198:00 BCM - Communication error with emergency call unit • U212D:00 BCM - Communication error with light control module (RH) • U3000:00 TCU - Telematics communication unit internal malfunction • Low Voltage Battery DTCs
09-021-20-37142020-07-02. Service bulletin. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM). Some customers may experience the master warning light and/or the "In-Vehicle Network Malfunction" warning message in the instrument cluster on with DTC B119F:01, B119F:13 and/or B119F:2B stored when the vehicle position cannot be displayed correctly. (TCU - Tel antenna No. 1 malfunction) (TCU - TEL antenna No.1 circuit malfunction) (CMU - GPS antenna signal circuit malfunction). This concern may be caused by incoming noise disturbing the reception of GPS signals, resulting in the wrong vehicle location and the DTC stored. To eliminate this concern, the GPS antenna has been modified.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.